Best Soler Performance in 2026

Efficient Tapered Transition (No steps)

Self-centering OEM screw pattern design

Military/Aerospace Sealing Gland Design

Efficient Tapered Transition (No steps)

Self-centering OEM screw pattern design

Military/Aerospace Sealing Gland Design

Set of 2: Driver & Passenger Side. Supplied with 3M Adhesive Backing.

OEM Finish, Fit, and Function. ~8"x.125"x1" (Approximate Size)

Designed, Tested and Built for Any Environment and Durability.

Efficient Tapered Transition (No steps)

Self-centering OEM screw pattern design

Military/Aerospace Sealing Gland Design

[PREMIUM PERFORMANCE] - Bosch Fuel Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended

[CIRCUIT PROTECTION] - Built-in circuit protection in every Bosch Fuel Pressure Sensor ensures your vehicle's electronics and computer systems stay unharmed

[HIGH RELIABILITY] - High reliability of pressure sensing proved in gasoline and diesel direct injection systems

Leading Manufacturer Of High-Quality Products

International Renown For Our Diverse Range Of Award-Winning Products

Fully Equipped With State-Of-The-Art Technology. Designed as a direct-fit replacement of your worn-out or malfunctioning part, it will provide easy, no-hassle installation and help restore proper fuel system functionality needed to keep your vehicle performing reliably, efficiently, and safely for many miles to come

Replacement Electronic Throttle Body Assembly - regulates the proper volume of airflow into the engine which is essential to the mixture of fuel and air in the engine. If you are experiencing engine stalling, failing to start, electronic throttle warning light came on, hesitation or power surging on acceleration on your vehicle then you may have a problem with your vehicle's throttle body.

Compatible Replacement for Chrysler, Jeep & Dodge 2.0L, 2.4L Vehicles - 2011 - 2014 200 2.4L | 2007 - 2010 Sebring 2.4L | 2008 - 2014 Avenger 2.4L | 2007 - 2012 Caliber | 2009 - 2017 Journey 2.4L | 2007 - 2017 Compass 2.0L & 2.4L | 2007 - 2017 Patriot 2.0L & 2.4L. The throttle body on your 200, Caliber or Compass can easily be located inside the engine bay connected at the receiving end of your air intake hose.

Replaces Part# 4891735AC, 4891735AB, 4891735AA, 5429090, 04891735, E100449, 67-7002, S20176, TB1150, 977-025. This replacement electronic throttle body assembly from AA Ignition comes with the new redesigned internal electronic sensor replacing the old one that commonly fails due to excessive wear and tear.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

[PREMIUM PERFORMANCE] - Bosch Original Equipment Crankshaft Position Sensors provide accurate detection of engine speed - engine speed is the main control variable for ignition timing

[ACTUAL OE] - Bosch Original Equipment Crankshaft Position Sensors aren't just a quality replacement component, they're the same sensor your vehicle was equipped with when manufactured - minus the expense of brand name packaging

[SUPERIOR ENGINEERING] - Robust design features precise digital measurement of rotational speeds, high resistance against external interference, and a wide temperature range that withstands extreme hot and cold operating conditions

JIC -6 AN male thread (9/16-18) to 3/8" tube hardline connector with 3/8 ID brass insert

Constructed of 6061 T6 aircraft grade lightweight aluminum material

Black anodized finish

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

This part requires programming and or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors

[PREMIUM PERFORMANCE] - All Bosch Fuel Pressure Sensors provide very reliable and accurate measurements and feature extremely fast response times to ensure your vehicle runs as intended

[LONGER LIFE] - Sensors feature built-in circuit protection to ensure your electronics and computer systems stay unharmed

[PROVEN RELIABILITY] - High reliability of pressure sensing proven in both gasoline and diesel direct injection systems

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Check the Amazon Parts Finder to see if this parts fit your vehicle and check the descroption also to see the detail fitment info

Crossreference with OEM Number AT4Z9E926A, AT4Z9E926B, AT4Z9E926BFC

Innovative engineering, manufacturing technology and quality control ensure that SCHNORKEL Fuel Throttle Bodies meet or exceed the performance of the original equipment they replace. Every unit is designed to OE fit, form and function requirements accomplished by leveraging SCHNORKEL's OE expertise

Precision Die-Cast Aluminum. Fine Shot-Blasted Surface Finish

Throttle Body Inlet: 70mm

Compatible w/ OEM Throttle Cable

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Light-weight and high flow racing performance design. Typical use like : inline air cooling, cool air intake and re-direction, enhancing filter flow rate, improving throttle response and engine performance, reducing engine stalling, improving poor Engine starting

Silicone-Impregnated Fiberglass structure for high temperature application

Steel Wire Reinforced structure enables hose flexibility and durability

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built

High Flow Power Plus Series 62mm Throttle Body Increases Airflow to Improve Horsepower and Throttle Response Over Stock

Recommended For Vehicles Where Modifications Have Been Made or are Planned Especially Cold Air Intakes and Exhaust

This throttle body adapter will allow you to install a 3-bolt DBW LS throttle body onto a 4-bolt LS intake. For example, an LS2 or LS3 intake manifold.

Compatible with up to 75mm throttle body

Compatible with intake manifolds up to 102mm

[INDUSTRY LEADER] - As an original equipment global leader in mass air flow technology, all Bosch Mass Air Flow (MAF) sensors ensure low levels of harmful emissions with greater fuel efficiency and improved engine performance

[OPTIMAL PERFORMANCE] - OE technology provides the correct function and calibration to ensure trouble-free operation and emission compliance while providing up to 20 percent better fuel consumption

[READY TO INSTALL] - 100% new, not remanufactured, sensor and housing are calibrated and sold together, ensuring precise sensor reading and optimal engine performance

[PREMIUM PERFORMANCE] - Bosch Original Equipment Crankshaft Position Sensors provide accurate detection of engine speed - engine speed is the main control variable for ignition timing

[ACTUAL OE] - Bosch Original Equipment Crankshaft Position Sensors aren't just a quality replacement component, they're the same sensor your vehicle was equipped with when manufactured - minus the expense of brand name packaging

[SUPERIOR ENGINEERING] - Robust design features precise digital measurement of rotational speeds, high resistance against external interference, and a wide temperature range that withstands extreme hot and cold operating conditions

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Improved torque performance.

Increased fuel economy.

Spiraling Helix design.

Tier 1 OE supplier for throttle bodies

Restores original drivability characteristics

Meets or exceeds the OE performance standards to ensure quality and reliability out of the box

Direct replacement - this diesel injection control pressure harness is designed to match the fit and function of the original harness on specified applications

Ideal solution - this harness is a reliable replacement for an original harness that is missing, failed or damaged due to corrosion

Durable construction - this part is made from quality materials to ensure reliable performance and a long service life

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Country Of Origin : United States

The Package Height Of The Product Is 4.25 Inches

The Package Length Of The Product Is 1.375 Inches