Best Sologood in 2026

Genuine Amass 10 Pair XT60 Connectors with Snap on Covers

XT-60 Connector for RC Lipo Batteries Drones Airplanes Cars Vehicles

60 Amp Current Handling Bullet Connectors

Applies to check LiPo/LiFe/Li-ion/NiMH/NiCd battery.

The Cellmeter-7 is a simple, fast and brilliant way to check battery voltage.High quality and lightweight with excellent performance.

Precisely test 1-7 cell voltages, monitoring the voltage of individual cells.

【RC LED Light】This Wireless RC LED light kits designed with small volume and ultra light weight which is very easy to install on your RC jet plane.

【Enhance recognition of flight attitude】The high quality LED lamp beads contribute super brightness lights to enhance the recognition capability of flight attitude.

【Three Blink Modes】Double flashing, fast flashing and breath flashing, just one-touch switching to experience the difference flash modes.

Signal type is PWM analog signal not digital signal.

Suit for servos operation and control.

Easy to Install in the receiver.

【The New】CADDX VISTA FPV antenna 5.8GHz center frequency, exquisite workmanship,<br> best in class signal quality and range

【Advanced design】Low feeder loss,easy to install, can be bent at any angle maintain

【PC+ABS Material】CADDX VISTA FPV antenna for 5.8GHz FPV racing,can withstand high <br>strength impact,support you better range and performance in any orientation

The new A3 Pro V2 is a high-performance and functional 6-axis gyro and stabilizer designed for R/C airplanes. <br>This gyro can be used with nearly any size and type of R/C airplanes and it will make the flying even easier and comfortable

32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance

6 flight modes, including GYRO OFF mode, NORMAL mode, LOCK mode, ANGLE mode, LEVEL mode and HOVER mode

The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo .

With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily.

It is able to connect three sets of servo or ESC at the same time, use SCM to control.

Genuine Amass 6Pair AS150 Connectors.upgraded from XT150 connector

Made of high temperature resistant nylon and pure copper with 24k gold plating

Anti-spark plug, 70-150A high current, low resistance, suitable for high voltage batteries

New generation of nano FPV camera with upgrade newest imaging tech

Ultra Light Weight: Only weighs 2g for extream FPV racing drone exprience

High Standard Image Specs: Equiped 1/3" CMOS sensor and 1200TVL 1.8mm lens

Universal RC Servo Signal Reverser Rotation Inverter for Aircraft Airplane Steering Gear 2Pcs,suitable for any steering gear, is able to make the forward steering gear reverse rotation, steering gear is rotating anyway.

Directly connect to the receiver,it"s Operating voltage is 5.0-6.0V;Current: 2A

Controlling and Operating is high performance,so do not need to worry about no reverse servo.

EV800D FPV goggles ,5 inch 800*480px HD high brightness LCD.

This FPV Video Display Glassesbuilt-in ultra-sensitive 5.8GHz 40ch receiving module, with RaceRand, automatic search function.

Detachable design, can be used as 5 inch FPV monitor or FPV goggles;92% transparent lens adopted, no distort, no blur on the edge of screen.

Detect the angle range of ±90 °, For 250-800mm main roto.

Working temperature: 0 centigrade-40 centigrade

LCD display with backlight, detachable split design (CR 2032 Li-on x2 220MAH included);(Not included Battery)

A pack of 8 high-efficiency Counter-Clockwise propellers + 8 adaptor ring.

High-efficiency propellers are generally suitable for aircraft and fixed-wing aircraft,<br> and are a good substitute for props.

Made of glass fiber reinforced nylon to increase output and extend service life.

Using the Caddx Ratel 2.1MM Len FPV mini camera in your racing drone or FPV quadcopter,<br>you can clearly see the front and all obstacles, enjoy your flying in the sky.

TV System:NTSC & PAL (changeable);Image: 16:9 & 4:3 (changeable). You can choose the <br>using modes which you want.

High Horizontal Resolution 1200TVL.

Made of high quality material, which is lightweight, durable, eco-friendly and uneasy to be broken.

Provides stronger thrust, more safe and energy saving.

Easy and convenient to install and remove off.

20A ESC Brushless DSHOT BLHeli_S 2-4S Lipos Electronic Speed Controller for FPV QAV Drone Multirotor Quadcopter

With BLHeli_S firmware, easy to upgrade or flash via the esc signal cable;The throttle signal cable is twisted pair, which effectively reduces the crosstalk caused by signal transmission..

The applicable number of battery cells :2-4S;The original components are used to ensure the high-quality current capability of the ESC..

32-bit processor, high-precision 6-axis MEMS sensor, perfect hardware design and stable firmware, providing more reliable performance

6 flight modes and 6-stage mode switching, including gyro off mode, normal stabilization mode, lock mode, angle mode, balance mode and hoist mode;

Full support for PWM, PPM and multi-protocol digital serial receivers;

GDW IPX896 43KG Brushless Stainless Steel Gear Waterproof Digital Servo

Reliability Stability and Strong adaptability, Low noise and Smooth operation

Copper AluminumStainless Steel metal gear,with hard anodizing

The hardware pulse width modulation is turned on by default, and the damped light hardware drives the motor, with low noise and better response. Plus smoothing.

Integrate rgb multi-color bright Ed night light, flying at night is more cool. Natively support BLHeli-S, support the new DShot150/300/600 digital throttle, strong anti-interference ability, fast response

Using 6 layers, 3 ounces thickness copper high-quality PCB, hierarchical layout of high current and small control signals, enhance the anti-interference ability. There is also a gold plating process on the PCB surface, which effectively improves the current resistance and heat dissipation capacity of the ESC

The mobula 650mm is designed for mid/high speed FPV wing, the V tail improve the stability of the route during high-speed FPV flight

The thrust line is special turning for high speed flight

Large room for electronics, made the wiring simple .

Wide 6V to 60V Operating Input Range

Start-up Voltage >=6.7V

VOut 5V, 9V or 12V Adj. Default is 5V

Matek Flight Controller F405-WTE : Upgraded Flight Controller,it is designed specially for fixed wing

MCU: STM32F405RGT6, 168MHz , 1MB Flash, IMU: ICM42688-P,Baro: SPL06-001, OSD: AT7456E, Blackbox: MicroSD card slot

ESP WIFI telemetry/ELRS 2.4G receiver, 6xUARTs, 12x PWM,1xI2C

Material:EPP/ABS /Carbon Fibre;Four magnetic structure, firmly lock the cabin cover

Rudder volume size adjustble ;Size:Wingspan690mmHeight:88mmLength:415mm;Weight:150g

Tailored for DJI high-definition digital transmission, equipped with two dedicated bases for digital transmission and simulation, taking into account high strength and lightweight

Upgraded version: From November 2021, data transmission will be upgraded from 100mw to 500mw. Support OTG of Android Cellphones,and computer OTG. Antenna is 5.8G,not the cheap 2.4G (whose range is very small and material is very cheap) like others

3DR telemetry 915mhz set for multiwii setting. PLUG AND PLAY. Pre-configered and tested to 115200 BAUD rate, and all other settings needed

The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range and superior performance to Xbee radios

Nickel plated steel strip：conveniently connect the batteries like 18650 AAA AA Battery

Size:Thickness :0.15mm,Lenth:1m,Spacing:20.2mm.

Plated;Smooth surface,easy to weld.

The Fixed Wing T-1 Ranger is lightweight and portable, with a quick-release design for easy assembly and disassembly.

Excellent aerodynamic design, small wingspan, large space, and convenient layout of electronic equipment.

Support external camera, can shoot multiple cameras at the same time.

STRONG DURABILITY and LONG SERVICE LIFE：It is made of EPP foam, ABS, carbon fiber. This excellent material helps to improve impact resistance and is not easy to break.

UPGRADED VERSION:The new flight control system,The dual motors have strong power and the thrust-to-weight ratio is as high as 1.71,Support for external cameras,<br> which can take multiple cameras at the same time.

EXCSLLENT DESIGN: The design of doubling the adjustable range of the center of gravity, taking into account the dual flight requirements of light load and heavy load,<br>Excellent aerodynamic design, flying slowly can makes it easy to control the vast sky.

Humanized design, independent potentiometer adjust for different axis sensitivity Optional - Three-mode switched from controller,

The Flight Controller Stabilizer System Provides four levels of flight modes: 1- Beginner; 2 - Practice; 3 - Intermediate; 4 - Expert.

Four Model Types Support : singal aileron,dual ailerons,triangle and V-tail.

This 3 inch fpv frame kit is made of high-quality 3K Carbon Fiber，gives you a total new level of fpv experience.

Lightweight, nice looking design, durable, very strong freestyle frame.

Scope of application: 20*20mm, 25.5*25.5mm flight control mounting holes, 120mm wheelbase, supporting 3-inch propellers.

LDARC CT01 RC radio transmitter Remote Controller with CR1800 Receiver for rc car, rc truck, rc crawlers, and rc boat.

2.4GHz frequency and 8-channel reception.

Real time telemetry and gyroscope receiver - real-time information display on the screen, vehicle battery voltage, receiver signal strength.