Best Soyond in 2026

🚗【Premium 12 Volt Fuse Block】Soyond 12v fuse block comes with negative busbar, damp proof cover. All busbars and fuse clips are nickel-plated copper, which has corrosion resistance and good conductivity.Max operating voltage: 30A per circuit & 100A per fuse panel.

🚗【Led Warning Indicator】Red LED warning light will be on when the corresponding fuse is blown. You can immediately know and timely processing since this waterproof fuse block will indicate exactly where there is a short circuit or other fault.

🚗【Wide Application】This 6-Circuit Blade Fuse Box is widely used automotive car boat, suitable for all marine, motor-home, automotive & motorsport applications.

【INVERTER 12V DC TO 110V AC】 Delivers 3000W continuous power,and converts 12V DC power to 110V AC power.Features 3 AC outlets,USB port and 2 pairs of 2AWG battery cables.

【MODIFIED SINE WAVE】This 110v inverter applies an aluminum alloy shell to resist heat and corrosion.Built-in system improve power conversion efficiency and enhance AC equipment performance.

【SAFE and RELIABLE】Our 3000 watt power inverter has premium protection functions: short-circuit,over current,high/low voltage and reverse polarity protection.

Distribution Block Input: 2GA*1, Outputs: 4GA*2 Wire

Car audio distribution block, Impact Resistant Snap-on Plastic Cover, made Of High Strength, Nonperishable Industrial-grade Plastic

High performance amp power distribution block,Low-resistance, high-current ability

Distribution Block Input: 1-0/2/4 Gauge In,2-4/8 Gauge AWG Out

Car audio distribution block, Impact Resistant Snap-on Plastic Cover, made Of High Strength, Nonperishable Industrial-grade Plastic

High performance amp power distribution block,Low-resistance, high-current ability

【High-Efficiency Power Inverter】110V AC outlets for charging larger devices such as laptops and tablets, 2 USB charging ports for powering USB compatible devices(Max 3.1A total output).

【Double protection mechanism】Full-protection with short-circuit , low-voltage , over-charge,over-voltage, over-load,over-temperature protection,built-in fuse.

【Compact And Lightweight Inverter 12V to 110V】Only 4.2 x 2.8 x 1.3 inches, with aluminum shell design, space-saving and easy to carry anywhere with you.It can be used for camping, outdoors, vacations, road trips, remote job sites, and even charging household items.

[150W Car Power Inverter] - Dual USB ports & AC outlets car outlet adapter,can charge most phones and tablets simultaneously (Max 4.2A total output). AC inverter outlet ,great for string lights, laptop, breast pump, CPAP machine, nebulizer, game console, kindle, TV, DVD players, lights, iPad, and other electronic devices

[Multi-protection Car Charger Outlet] - Auto power inverter,safe charging design provides protection against Over voltage / Low voltage / Overload / Short circuit / Over heat / Over charging.

[Quick Charging car power adapter] - Dual 0-2.4A USB ports can automatically detect your devices to deliver optimal charging speed, great for your kindles, iPhones, iPads, tablets, MP3 players, cameras, and other mobile devices,a good choice as requisite car accessories

☀️【Portable Solar Power Generator 】Solar power station, perfect emergency solar kit for home, travel, camping. Rechargeable backup battery power supply with larger power capacity 8000mAh, Storage solar generator power to battery and supply power to LED light and mobile phone.

☀️【solar Panels Portable Generator Fast Charging】The mini generator With its own lights of 1 level and 2 extra 3W bright white LED bulbs, Low power consumption, long-lasting lighting time, and durability. Up to 23 hours of lighting with a bulb. Music playback can last more than 15 hours.

☀️【Solar Panels Portable Generator Fast Charging】Quickly be charged by 6V solar panel(4 hours fully charged). Two methods for you to choose from. Easy and Fast! This solar power generator is reliable, Using LiFePO4 battery, Two ways of charging: solar charging and mains socket charging, convenient and fast.

【High cost-effective fuse kit】-- The kit includes micro size 50pcs, mini size 160pcs and standard size 90pcs. Three styles of fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A / 30A/ 35A/40A), equipped with a fuse puller.

【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.

【Abundant types and precise protection】-- Three different types of fuses are suitable for most vehicles and meet the different needs of consumers. It is recommended that you use the original car fuse to compare with our fuse size or search the car fuse type on the Internet.

✔️️120 Fuses - Sizes: 5-Amp, 7.5-Amp, 10-Amp, 15-Amp, 20-Amp, 25-Amp, 30-Amp

✔️️14 AWG in-line fuse holder with water-resistant cap, protects from dirt & road splash (10 Pcs)

✔️️Remover tool - for safe, fast and easy removal

【RAPID FIX】Red LED warning light on fuse box will light up immediately when the corresponding fuse is blown. It is very safe and easy for you to find the problem and replace the blown fuse.

【SAFE MATERIAL】Made of environment fire-resist PBT material, this fuse box meets all the standards of an nice fuse block, which has high mechanical strength, good insulation, heat & flame resistance. It will hardly cause any issues like fracture, deformation, combustion or short circuit.

【MAKE WIRING NEAT】12 volt fuse block with ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made your wiring clean and tidy.

Heavy duty 12AWG wire, better protection to the circuit.

Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm

Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse.

Heavy duty 10 (AWG) Gauge red color wire Allow you to splice it into any project.

Inline fuse holder for ATC/ATO blade fuse.

Package included 4 x fuse holder and 4 x 40Amp fuse.

The blade fuses are clearly marked with amperage and color coded for easy identification

Available in amperage ratings of 2A to 40A (rated at 32 volts), you could always find one that fits your auto

Includes both standard size & mini size; Perfect for Car/RV/Truck/Motorcycle/Boat

10 AWG thick red pigtail wire allow you to splice it into any project.

Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm

Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in.

LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.

FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.

The blade fuses are clearly marked with amperage and color coded for easy identification

Available in amperage ratings of 2A to 40A (rated at 32 volts), you could always find one that fits your auto

Includes both standard size & mini size; Perfect for Car/RV/Truck/Motorcycle/Boat

(2) ANL Fuse Holders with 150A Fuses

Securely Holds Fuse and Terminals (Use with 0,4,8 or 10 Gauge Ring Terminals)

Crystal Clear Cover

➤ Optimal Conductivity：12 Circuit Fuse Block Box is applied to ATC/ATO (Middle Size) fuses, which has positive & negative side. It means every positive terminal screw has a negative one. Max operating voltage: 32V DC; Max 30A per circuit & 100A per panel.

➤ Superior & Safe Material:Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. It hardly lead to break, deformation, combustion or short-circuit.

➤ Appliance Name Labels:Comes with multifunctional DIY sticker for convenient examination & repair. You can easy to identify which appliance is going wrong. Perfect for outdoor troubleshooting.

(2) ANL Fuse Holders with 100A Fuses

Securely Holds Fuse and Terminals (Use with 0,4,8 or 10 Gauge Ring Terminals)

Crystal Clear Cover

【Safe LED Indicator Design】- Kohree 12V Boat Fuse Block comes with 12 fuse pieces and each circuit has its own led indicator light. When a fuse blow, the corresponding indicator light will light up instantly, so you can easily figure out the short circuit or any other fault and effortlessly fix the error.

【High Quality & Safety Material】- Made of environment-friendly PBT material, IP86, CE Certification, marine 12-volt fuse block is mechanically strong, heat and flame resistant, and help you get rid of problems like broken, deformation, combustion, or short circuit.

【Waterproof Neat Panel Mount】- Clear PC cover, splash, and dust-resistant construction can add extra protection for Kohree 12v waterproof fuse block. It is easy to operate.

(2) ANL Fuse Holders with 250A Fuses

Securely Holds Fuse and Terminals (Use with 0,4,8 or 10 Gauge Ring Terminals)

Crystal Clear Cover

Anodized finishing that is high in conductivity

The base is durable when used at high temperatures

Covers made from crystal clear crystals

Anodized finishing that is high in conductivity

The base is durable when used at high temperatures

Covers made from crystal clear crystals

LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.

FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.

Supplied with two 4 inch wire leads of 16 gauge black wire

Package Dimensions: 2.54 L x 9.144 H x 9.144 W (centimeters)

Package Weight : 0.023 kilograms

Rated to 30 Amps

Features Locking Weatherproof Cover with Mounting Tab

8" 12 Gauge Leads with Tinned Copper wire for Corrosion Resistance

Package includes -- 10Pcs 15A mini fuse tap and 10 Pcs 15A fuse.

Convenient to use -- just plug this fuse tap into an existing fuse holder. It’s easy for you to add an extra power or connection to the fuse box.

Reliable Material -- This mini fuse tap is made of nylon and 16AWG wire, which is durable and reliable to use, good bending performance, melting resistance and nice electrical conductivity.

COMBINE TO CONQUER - The road ahead just got a bit easier. This relay box kit combines everything you need into one convenient package: a top-notch relay box, 6 Bosch style relays, 10 fuses, terminals, and silicone seals.

REMAP YOUR WIRING - Organize, consolidate, and keep track of multiple independent circuits with six relay sockets and six fuse holders.

MULTI-TERRAIN - Our unique "Z" shaped brackets make it possible to securely mount this waterproof relay box just about anywhere.

PACKAGE INCLUDE - MuHize fuses assortment box contains 120PCS commonly used blade fuses type and one fuse clamp. Mini 120PCS (APM, ATM): 2A/3A/5A/7.5A/10A/15A/20A/25A/30A/35A - 12PCS of Each, 10 x In-line mini blade fuse holders (ATM)

GREAT PROTECTION - Terminals are constructed from tin-plated zinc for corrosion resistance and enhanced conductivity. MuHize fuses made of premium materials, fast and precise fusing current to protect your vehicles and electrical devices from a short circuit and overload.

WIDELY USE - MuHize assorted fuses are specifically designed for Cars, Trucks, SUVs, Vehicles, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, Snowmobiles, and most general DC applications etc, covering such components as radio, light, turn signals, etc.

PACKAGE INCLUDE - ① MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses; ② MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses; ③ MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses; ④ MuHize 3x Mirco2 fuse adapter with 5 Amp standard blade fuses.

DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit.

EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting.