Best Soyuz in 2026

MAGIC LITTLE BOX - The Launcher is not meant to be transparent and clean like other “gain boosters” and audio amplifiers on the market. It was specifically designed to add color and character to your microphones and bring your sounds to life. The Launcher features a custom hand-wound transformer and an analog circuit that provides a warm texture and clarity that will make your mics "open up" and become more three-dimensional in any signal chain.

DREAM IN COLOR - Whether on the stage, in the booth, or in your bedroom, the Launcher is plug and play and gives your dynamic and ribbon microphones the ability to perform incredibly with virtually any interface or preamp by optimizing the sound of your source, boosting your gain by 26dB, and lowering the amount of audible noise in your signal chain.

COUNTDOWN TO THE PERFECT SOUND - The Launcher is the culmination of years of beta testing and feedback from musicians and engineers around the world. We did not stop until the winning combination was found. The Launcher’s custom transformer and proprietary circuit have become one of Soyuz’s most closely guarded secrets.

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro performance with the finest pre-amps - Achieve a brighter and a more open recording thanks to the best performing mic pre-amps the Scarlett range has ever seen. A switchable Air mode will add extra clarity to your vocals when recording with your Scarlett Solo.

Get the perfect guitar take - There’s no need to sacrifice your tone with the high headroom instrument input when recording your guitar and basses. Capture your instruments in all their glory without any unwanted clipping or distortion thanks to our Gain Halos.

Studio quality recordings for your music and podcasts - You can achieve professional sounding recordings with Scarlett’s high-performance converters which enable you to record and mix at up to 24-bit/192kHz. Your recordings will retain all of their sonic qualities so that you can sound like the artists you admire.

BATTERY FREE PERFORMANCE – You won’t need to worry about dead batteries in your pedalboard ruining your performance when you use an AC-DC 9-Volt power adapter. You can ensure a consistent, battery-free performance when you directly power it

9V POWER SUPPLY FOR GUITAR PEDALS - The D'Addario 9V Power Adaptor works with pedals and other devices requiring 9-Volts to minimize the need to change batteries.

VERSITLE - The Adapter converts AC wall power to 9-Volt DC for powering most instrument pedals and other 9-Volt battery devices. The D'Addario Adapter can also be used to power tip-negative keyboards

2-channel USB Audio Interface with 1 XENYX Preamp

Instrument Input

Phantom Power

FOR HOME STUDIOS & PROFESSIONAL RECORDING: In the studio, boost the signal of quiet audio sources like vocals, percussion, or acoustic instruments while maintaining the natural sound of your microphone.

REDUCE NOISE WHILE ADDING MICROPHONE CLARITY & SIGNAL STRENGTH: The Cloudlifter CL-1 mic activator uses Phantom power to give passive mics up to +25dB without passing Phantom power onto the mics themselves. Reduce unwanted feedback while increasing the clarity of your microphones.

DESIGNED FOR PROFESSIONAL RESULTS: Our home studio equipment is perfect for podcasts, live streaming, radio broadcasts, live sound, and studio recording. It's designed to seamlessly integrate with your preamp, maintaining ease-of-use for any professional.

【PARTICULAR DESIGN】 - The excellent design of karaoke microphones is very suitable for your hand, which let you feel more comfortable. And the built-in high-quality Bluetooth module can be used as a wireless speaker, mp3 player, and recorder, compatible with various singing applications.

【TWO WAYS CONNECTION】- Bluetooth Connection & Cable Connection. You just need to connect your phone with cable or Bluetooth, and then open the singing APP on your phone. The built-in clear audio and the vividly sound effect let you listen and sing anytime and anywhere.

【HIGH COMPATIBILITY】- Supporting micro SD card max 32GB(NOT INCLUDED) and song switch. The Bluetooth has a great distance of connection(10m).

Carefully Tuned Sound: Balanced and Neutral frequency response. Unlike most condenser microphones, this microphone does not sound harsh and will not stand out in your mix or sound fatiguing over time.

High Quality Diaphragm: Our capsules are made using high-grade brass and Japanese imported mylar. They are manufactured with the most precise machinery to achieve higher sensitivity making them able to reproduce subtle sounds. This makes it the perfect for a vairety of sources.

Low Noise Circuit: Our custom transformer less JFET circuit is made with German capacitors and components with a tolerance as low as 1%. It features gold traces for high conductivity, great performance without distortion, and a noise floor of less than 13dBA.

🎤【Multi-Layers Of Shielding】This XLR Cable Combined Oxygen-free Copper conductor with multi shielding(cotton, copper, carbon fiber,TPE jacket, Nylon braided), can be effective in shielding 105% of the clutter and static interference signals, eliminating noise,attaining the maximum cancellation of hum and ensuring high fidelity sound quality.

🎤【Metal Spring SR Design】This XLR male to female cable is built in metal spring SR design. It is more flexible and durable, never rupture. It is also more durable than common SR. The material of balanced XLR cable connector is made of heavy duty alloy, it is very hard. 9-pin is made of copper. Providing the best connectivity to the device. Anti-oxidation & anti-corrosion.

🎤【Plug and Play】: This XLR microphone cable is user friendly. With plug and play design, you can easily connect microphone with 9-pin XLR devices by balanced XLR cable. Features a self-locking design allow it will grip your devices firmly and securely and never get loose when you move.

【Lifetime Warranty】Free Lifetime Replacement or 60 days Money-back Guarantee if quality issue, Please contact us without hesitation. 1, Find your order ID. 2, Click" Contact the seller".

【Upgraded 6N OFC】The FURUI XLR conductor is made of 6N oxygen-free copper, audio transmission is more stable than 4N OFC, noiseless and high fidelity, without static/noise and popping/hum/crack. The internal structure of XLR cable is built in triple shielded, extremely resistant with EMI. Waterproof & UV-resistant PE Jacket for outdoor conditions. RoHS Compliant.

【Various Colors & Nylon Braided】This XLR female to male cable has 6 different colors can help you to easy track or match the correct ends of MIXER DMX LED lighting & microphones. Tested plug & unplug and bend for 10,000+ lifespan. The groove design on both sides makes the plug and unplug more comfortable.

This tube has a well balanced, colorful tone with strongly defined lows, mids and smooth highs

It allows for more clean head-room than higher gain 12AX7s

In overdrive, it is smooth and strong with well defined lows and mids

COLOR CODED XLR MICROPHONE CABLE - GearIT Colored XLR Cables come in 10 different colors (red, orange, yellow, green, blue, purple, brown, gray, white, black) for easier color matching and tracking for wireless mic cords, audio mixer or microphone cords.

3 PIN XLR PATCH CORD - Our colored microphone XLR cords have shielding anti EMI/RFI, heavy duty metal connectors for wireless mic sets. Great for HI-FI sound, noiseless and high fidelity without static interference.

XLR MALE TO XLR FEMALE MIC CORD - Our GearIT XLR Patch Cables are 3-pin balanced and shielded XLR cables that are good for replacement cables

Mobile-ready, bus-powered 2-in/2-out USB-C audio interface; no power supply needed (USB-C to C and USB-C to A cables included).

Loaded with 2 pristine XMAX-L solid-state mic preamps to capture every detail.

Studio-grade converters allow for up to 24-bit/96 kHz recording and playback.

❤Tube MM Phono Preamplifier: Converts phono signals to Line Level Signals with low-noise integrated circuits and high-quality components to remove low-frequency noise and ensure clear sound quality. Designed with a grounding post to protect your turntable.

❤Three switchable gain modes: 39, 42, and 45 dB. Adjustable gain levels to give you customizable control and outstanding compatibility. Entry-Level high-end analog sound and top-notch circuitry for an unbeatable low cost.

❤Tube Preamplifier: It's also a tube preamp with 3.5mm AUX Input. Designed and assembled by Fosi Audio from high-quality components. Great warm, smooth-sounding.

Low-Noise Class-A JEFT Amplifier

Double Single-Ended Amplifier Topology

Shielded Enclosure

Demo Streaming Mixer w/USB Interface

12AX7 vacuum tube,

U.S. Product Code: 12AX7

European product Code: ECC83

Premium ultra-low noise, high headroom analog mixer

State-of-the-art, phantom powered Xenyx Mic Preamp comparable to stand-alone boutique preamps

Neo-classic "British" 2-band EQ for warm and musical sound

The BETA 98H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.

The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.

Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.

<p>🎤-Wireless XLR transmitter and receiver, 2.4GHz band is optimal for Microphone wireless, Solid RF connection over a 90 feet range（normal）,uncompressed wireless signal transmission, low noise and latency.Up to 107 dB signal-to-noise ratio provides clear, detailed audio at any volume. High Resolution 24-bit/48kbps audio. Broad 20Hz-20KHz frequency response. Dynamic Rang 107 dB.<br></p>

<p>🎤-The Xvive Audio U3 mic wireless system aims to take the complexity and frustration, out of traditional wireless microphone systems. Creating a flexible, all-in-one solution that makes any your favorite microphones into wireless,ensures good performance for your every show.<br></p>

<p>🎤-XLR transmitter and XLR receiver. Support 6 sets in the same place simultaneously. Works with any dynamic/Harmonic microphone, Audio mixer, PA system, Provides stable and reliable wireless transmission.Works with any active loudspeakers, Perfect for venues, weddings and mobile DJ's. Less than 4.5ms Latency（normal）, Simultaneous broadcasts on 6 channels.<br></p>

4-in/4-out USB 2.0 Audio Interface with 4 MIDAS Preamps

24-bit/192kHz

Phantom Power

Value-packed 2-channel USB 2.0 interface for personal and portable recording.

2 high-quality Class-A mic preamps make it easy to get a great sound.

2 high-headroom instrument inputs to record guitar, bass, and your favorite line-level devices, plus MIDI I/O.

RECHARGEABLE USB PHANTOM POWER】 The Xvive P1 gives you the freedom to use condenser mics and other audio recording equipment without being connected to power. It runs on an internal rechargeable battery and has enough power to run high-current condenser microphones for up to 40 hours!

【PORTABLE & VERSATILE:】Take it with you anywhere! At 1.7” x 1.3” x 4.1”, this power supply unit is small and lightweight; 12V / 48V operation makes it compatible with most microphones and audio devices that require phantom power. Charge time: 2.5-3hrs;battery life: 30-40 hrs, ensuring long and reliable performance time. Perfect for home podcasts, streaming and radio broadcasting, live concerts and music studio applications.

【LOW NOISE & HIGH AUDIO QUALITY:】The P1 allows you to use microphones and devices that require external power in any setup. Professional chip design effectively filters interference and high-sensitivity response minimizes noise while recording. Perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit that does not supply phantom power.

MAGIC LITTLE BOX - The Launcher is not meant to be transparent and clean like other “gain boosters” and audio amplifiers on the market. It was specifically designed to add color and character to your microphones and bring your sounds to life. The Launcher features a custom hand-wound transformer and an analog circuit that provides a warm texture and clarity that will make your mics "open up" and become more three-dimensional in any signal chain.

DREAM IN COLOR - Whether on the stage, in the booth, or in your bedroom, the Launcher is plug and play and gives your dynamic and ribbon microphones the ability to perform incredibly with virtually any interface or preamp by optimizing the sound of your source, boosting your gain by 26dB, and lowering the amount of audible noise in your signal chain.

COUNTDOWN TO THE PERFECT SOUND - The Launcher is the culmination of years of beta testing and feedback from musicians and engineers around the world. We did not stop until the winning combination was found. The Launcher’s custom transformer and proprietary circuit have become one of Soyuz’s most closely guarded secrets.

【PHANTOM POWER+ XLR CABLE】 Xvive P1 gives you the freedom to use condenser mics and other audio recording equipment without being connected to power. It runs on an internal rechargeable battery and has enough power to run high-current condenser microphones for up to 40 hours!

【LIKE A TANK】Take it with you anywhere! At 1.7” x 1.3” x 4.1”, this power supply unit is small and lightweight; 12V / 48V operation makes it compatible with most microphones and audio devices that require phantom power. Charge time: 2.5-3hrs;battery life: 30-40 hrs, ensuring long and reliable performance time. Perfect for home podcasts, streaming and radio broadcasting, live concerts and music studio applications.

【LOW NOISE HIGH AUDIO QUALITY】The P1 allows you to use microphones and devices that require external power in any setup. Professional chip design effectively filters interference and high-sensitivity response minimizes noise while recording. Perfect for powering microphones to send a signal to mixing consoles, or any type of processor or recording unit that does not supply phantom power.

Value-packed 2-channel USB 2.0 interface for personal and portable recording.

2 high-quality Class-A mic preamps make it easy to get a great sound.

2 high-headroom instrument inputs to record guitar, bass, and your favorite line-level devices, plus MIDI I/O.

USB/FLASH READER/MP3 COMPATIBILITY - Connect your external USB, computer PC, flash drive or Bluetooth device to mix & record Use the built-in controls to play/pause, skip tracks and switch between modes

BLUETOOTH WIRELESS STREAMING - Hassle and cable-free audio streaming ability directly to the console unit This audio mixer can wirelessly stream music tunes from iPad, iPhone and Android Smart Phone with mixing board from Pandora or Spotify

MIC AND STEREO LINE INPUTS - Supporting XLR and unbalanced 1/4" Plug with +48V Phantom button, highly accurate LED Peak Level Indicator and Ultra-musical 3-band EQ on all channels ultra-low noise, high headroom mixer with super easy functionality

Analog modeling bass preamp/stompbox with DI recording output

This BEHRINGER product has been designed to compete head to head with leading products on the market

Authentic V-TONE modeling technology capable of dialing up big vintage tube tones, funky slap sounds, crunchy distortions and all in between

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms

LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference

CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more