Best Splash Carpentry in 2026

DWE7485 only zero clearance insert

Will not fit any other saw model

Check your saw type before ordering

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

Protect hands and prevent kickback like never before

Powerful high-friction durable grip for extreme hold

Precision cutting and control down to 1/4" Ripping

Tougher tungsten carbide stays sharper longer

Thin kerf for fast and smooth cutting action and The arbor size is 5/8”.

Computer-balanced plate reduces vibration for improved accuracy and better finish

GR-200 Features Include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback

Moving-Blade-Guard Hand protection.Cutting Range (Table Saws):1/4 to 5 inch

Precise 1/4" thin rips

Auto-retracting heel technology hooks the tail-end of your board

Proprietary Green GRR-RIP for extreme hold

90-degree flip guide for vertical footing on band saws and router tables

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

Sold on Amazon

Kickback Prevention: FeatherPRO virtually arrests kickback. EVA material combines with our living hinge design to pinch board against the fence and absorb kickback forces. 5x greater kickback resistance versus plastic or wood feathers.

Ultimate Feed Control: EVA feathers increase the amount of surface contact on the work piece, ensuring a smooth glide and superior infeed control. Substantially reduces wiggle you get with plastic feathers.

Cleanest Cut: EVA Feathers absorb vibration and minimize chatter for a cleaner and more precise cut. Feathers are non-marring on even the softest woods and will not damage your workpiece.

Speed Up Your Woodworking Setup ... Set the height of your fence, blades, and bits in a fraction of the time. The Blockcision gauge block set comes with 16 precision setup blocks that can be combined to achieve hundreds of different measurements with ease.

Unique Ruler Markings for Quick Measurements ... You've just stumbled upon the only 16-piece setup block set with ruler markings on each bar. While other sets only mark the 123 block, we've graduated every single one to help you make measurements on the fly.

Work With Incredible Precision ... Whether you're setting up your table saw blade or router, next-level accuracy will be on your side. Blockcision bars are precise to ± 0.001” and allow you to make any measurement from 1/16” to 1” in 1/32” increments.

Spring-loaded, retractable locking heels for increasing control and stability during cuts to eliminate tear-out when ripping or routing

Diamond grip rubber bottom that is non-marring, non-slip TPE material provides maximum control to safely hold your workpiece in place

Ergonomic, tilted, comfort grip handle provides superior control and maximum grip, while keeping your hands away from the cutting tool and providing increased directional force against the fence

Revolutionary SawStop protection: Standard brake cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury

Compatible with all standard 10″ blades. Replaces TSBC-10R2 (equivalent to TSBC-10R2). Not compatible with CB Model Saws (CB Model Saws use TSBC-10L)

Compatible with all woods and other non-conductive materials

The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.

Combine bars to setup 100's of measurements. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Set up gauge blocks are all 4 inches extra long. Accurate gauge block set sizes: 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 1/2”, 3/4”, 1x8/7x4"

Protect hands and prevent kickback like never before

Rip as thin as 1/8" For extreme precision

Powerful grip and smart gravity heel for ultimate traction

Fits into a 3/8” hole in the top of the auxiliary fence

Range of travel 1/2″-5-3/4″ (12mm to 146mm)

Allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the Clamp getting in the way.

INCLUDES: (1) Long Hold Down Push Block (2) Short Hold Down Push Blocks (1) Safe V Stick and (1) Straight Push Stick

BLOCK FUNCTION: Provides added hand safety while guiding wood for sawing and cutting - safety blocks allowing you to maintain a firm and steady downward pressure of the workpiece, without the bounce or chatter as it crosses the cutters blades

STICK FUNCTION: Offers enhanced hand safety while guiding wood for sawing and cutting – the l-shaped stick (also called a v push stick) allows you to push the entire work piece through the blades, and the standard straight push stick is great when you have limited space - both are narrow and are useful when working with smaller stock

[MICRO HEIGHT ADJUSTMENT KNOB] allows you to place the project precisely where it needs to be so you can fasten it to the wall

[RUBBER GRIP SURFACES] Holds the project securely in place without marking up or damaging the material

[TRIPOD BASE] With no-slip/no-mar feet that will stay in place on uneven ground, even under a heavy load

We have all been in a situation where we need to quickly turn the power off on our router table or contractor table saw and both of our hands are a bit pre-occupied. Reaching down and underneath your router table or contractor table saw to try and locate the power switch can be very cumbersome as well as very dangerous while your feeding stock through.Many router table setups don’t even have an external power switch separate from the router itself.

With this uniquely designed and easy to locate Paddle Button Stop Power Tool Switch you can simply bump the large stop sign paddle with your knee or hip to shut the power off. That means both of your hands can stay engaged on the project while you bump the power off with your hip or knee. A large green START button is always visible on the top side of the paddle. Simply push the START button to power on.

Install the switch near or at hip level or in a position that you will be able to bump it when needed. The switch comes with installation hardware and can be mounted to most any type of material. The unit has two cords. The heavy duty female cord is 18” long and designed to accept the power source plug from your power tool. The heavy duty male cord is approximately 66 inches long and is used to plug the switch unit into your standard wall outlet.

INCLUDES: (1) Deluxe Push Stick (Magnetic type), (1) Deluxe L-Shaped Push Sticks, (2) Deluxe Push Blocks, and (1) Dual Handle Push Block

BLOCK FUNCTION: Provides added hand safety while guiding wood for sawing and cutting - safety blocks allowing you to maintain a firm and steady downward pressure of the workpiece, without the bounce or chatter as it crosses the cutters blades

STICK FUNCTION: Offers enhanced hand safety while guiding wood for sawing and cutting – the l-shaped stick (also called a v push stick) allows you to push the entire work piece through the blades, and the standard straight push stick is great when you have limited space - both are narrow and are useful when working with smaller stock

【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory.

【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces.

【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement.

INCLUDES: Premium Router Table Saw Push Block

FUNCTION: Perfect for ripping, table saw blade set-up and general purpose woodworking applications

ALL-IN-ONE: Tool comes equipped with front tip table saw push stick with step foot for chip and sawdust removal, a versatile table saw & router depth gauge, a square center finder, 4” hook rule, 7” rule

INCLUDES: (2) Deluxe L-Shaped Push Sticks

FUNCTION: Provides hand safety while guiding wood for sawing and cutting – allowing you to push the entire workpiece down with a single push stick

APPLICATIONS: The L Push Sticks (sometimes referred to as V Push Sticks) are commonly used in combination with jointers, tablesaws, router tables and shapers

SUPERIOR ADHESION: This removable double sided tape offers excellent adhesion. The silicone-based 2 sided tape adhesive securely holds pieces and templates in place with double stick yet allows pieces to be removed without breaking.

WORKS W/ ALL WOODS & CNC MACHINES: This woodworking tape double sided works with any wood type and is suitable for hand wood working, CNC machines, mounting & routers. Comes as a pack of 3 rolls of 1" in wide x 60 ft long each for a total of 180 ft.

INDUSTRIAL GRADE: Our strong double sided tape heavy duty adhesive is ideal for the professional woodworker or home wood craft. Ideal two sided tackiness & thickness that allows it to be applied and removed easily without chipping the wood’s surface

Allows for use of stacked dado cutters

Can be used with DWE7490 and DWE7491 versions

For woodworking and building

Power Tools and Accessories

Country of manufacture: Taiwan

Manufacturer: Bosch

Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp

Size: approx. 9.5 x 6.5 x 3.8cm/ 3.7" x 2.56" x 1.5" (L*W*H). Holding capacity force: 198 lbs.

Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips

INCLUDES: (1) Deluxe 11.5” Tablesaw Push Stick

FUNCTION: Provides high quality hand protection, plus optimal stock movement and control of your workpiece while it is being pushed through the router table, jointer, shaper table saw blade or cutting head

MAGNETIC: Features a handle with built-in (embedded) magnets to help deliver quick and easy storage options on any ferrous metal surface or applicable tool exterior – for convenient accessibility

INCLUDES: (1) Hold Down Push Block

FUNCTION: Provides added hand safety while guiding wood for sawing and cutting - allowing you to maintain a firm and steady downward pressure of the workpiece, without the bounce or chatter as it crosses the cutters blades

APPLICATIONS: Push block is commonly used for face jointing, ripping plywood, routing and other woodworking applications

Size:Set up gauge blocks are all 4 inches long，respectively: 1/8", 3/16", 1/4", 3/8", and 1/2" squared. And they may be stacked for a wider range of sizes. Accuracy: ±0.002".

Premium Material:5 Blocks Solid Aluminum Construction Blue Anodized to prevent damage to router bits and saws.

Easy to Use:The setup blocks are so much easier and faster to set the height of router bits and saw blades by using gauges like these than by using rulers or other measuring tools.

Made In The USA!

Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21

Dewalt Deep Cut Model #'s DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2