Best Sturdy Built in 2026

Hubface measurement - 86"

Brake flange measurement - 80"

Outside of torsion bracket - 74 1/2"

Complete parts set lets you build either a complete front axle or a complete rear axle

High pinion design provides added ground clearance and better drivershaft angles

Small pumpkin for increased clearance and a scale look, while optimized 3.75 gear ratio reduces torque twist

【 Fits】2014-2023 Polaris RZR XP 1000 | 2014-2023 Polaris RZR XP 4 1000 | Please Note: Not compatible with Anti-Lock Brake Systems (ABS) | Replaces OEM Rear Part # (AX01-002R0) : 1333124, 1333439, 1333718, 1333944, 1334307, 1334490

【Superior Performance】Get the durability and strength of SuperATV’s Rhino Brand Axles for your Polaris RZR XP 1000. They are made from chromoly steel and have a great strength-to-weight ratio. High articulation angles mean you can push your Polaris RZR XP 1000 to the limit. They are built for side-by-side riders who think stock axles aren’t enough and want a replacement that does more.

【Better Materials】Rhino brand axles are built to withstand hard riding. They are made of 4340 chromoly steel, one of the industry’s toughest materials. We’ve redesigned the CV joints so they can handle high articulation angles. And we pack each axle with synthetic grease to keep you running cool. To top it all off, our Rhino Brand Axles come with tear-resistant boots and seals that keep out rocks, dirt, and mud.

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete Rear Wheel Axle

1 Year No Fault Warranty

Combines weight distribution and sway control in a single unit - no need for additional hardware, outstanding performance - drive it and see

Handle can be used to hook up and remove bars, universal EZ Adjust frame brackets for easy installation and adjustment

None of the noise problems other WD/sway products have - it's quiet, significantly lighter weight than competing products

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

4-4" BT8 hub pre raced and studded.

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.

Spindle includes spindle nut, spindle washer, and cotter pin.

5-4.5" BT8 hub pre raced and studded.

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete Rear Wheel Axle

1 Year No Fault Warranty

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut

1 Year Warranty

Fits: 2014-2023 Polaris RZR XP 1000 / XP 4 1000 | 2015-2023 RZR XP 1000 High Lifter | 2017-2023 Polaris RZR XP 1000 Trails & Rocks | 2016+ Polaris RZR XP Turbo / XP 4 Turbo | See Product Description for OEM / OE replacement part #'s | NOTE: Not compatible with Anti-Lock Brake Systems (ABS)

Superior Performance: SuperATV's Rhino 2.0 RZR Axles are heat treated and combine maximized shafts and CVs with heavy-duty 4340 steel for superior strength and longevity. Rhino 2.0 Polaris RZR Rear Axels are 2x the strength of stock UTV / ATV axles and cool joints! Massive 4mm increase in rear axle shaft size!

Field Tested, Lab Proven: This is not your off-the-shelf Rzr Axle with a brand slapped on it. Each Rhino Axle is engineered using the latest CAD technology and is tested vigorously to handle any driving style / terrain. With decades of experience, the Rhino 2.0 Polaris XP Turbo Axles are the best on the market!

Bluetooth 5.3 dongle: Applies the latest Bluetooth 5.3+EDR technology, compatible with Bluetooth 5.2/4.2/4.2 LE/4.0/2.1+EDR, and supports Dual mode (BR/EDR+ Bluetooth Low Energy) to achieve low energy consumption and high speed. Quick response and better anti-interference.

Plug & Play: USB wireless Bluetooth is not limited by network and location, no need to install drivers, just plug the USB wireless adapter into your computer, you can use it directly. You can use the Bluetooth function at any time. Greatly improve your work efficiency and save your time.

Long Range Bluetooth Adapter: The USB Bluetooth 5.3 dongle uses Class 1 radio technology, equipped with extra long antenna, and the transmission range in the open area can reach 328ft/100m, Bluetooth connections are no longer affected by distance. Note: The actual transmission range will be affected by physical obstructions and wireless interference.

Pair of 1" straight spindles includes castle nuts and cotter pins.

Bearings included - (4) L-44643 1" inside dimension.

Hubs have pre-installed pressed in races.

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut

1 Year Warranty

Two 4-Leaf Double Eye Spring 25 1/4" Eye to Eye, 1 3/4" wide, 1750 lbs. capacity each

One single hanger kit

One 2 3/8" round ubolt kit

Replacement for OEM CV Joint Axle Assembly, Set of 2

Fully Assembled 4340 Chromoly Steel Axle (See below to confirm fitment)

Smart Parts Warranty, Quality & Service

Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers

Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD

Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance.

Sold as a pair (left and right)

Maintenance-free

Reduces and absorbs vibration

Trailer Nut Set

1" Washers & 2"Cotter Pins

Material: strengthen material,longer life.

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut

1 Year Warranty

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut

1 Year Warranty

Made of high quality metal

Equipped with screws

It help to install the servo on the front axle

Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle

Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed

Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread

Neoprene boots designed with additional bellows where necessary to reduce stress and ozone cracking

Threads and splines are precision rolled for hassle-free replacement

3 percent moly grease provides excellent high temperature characteristics for longer life and better wear

Replacement for OEM Bearing Carrier Assembly

Strong & Light design from Forged T6061-T6 Billet Aluminum

Smart Parts Warranty, Quality & Service

Please verify your year, make and model in the product details before purchasing.

OEM Replacement. Brand New Complete CV Axle Assembly. Includes boots, cotter pin, inboard clip and nut

1 Year Warranty

Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function

Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure

An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped

Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information

Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap; comes as shown in the first image