Best Stvmotorsports in 2026

Off-road enthusiasts looking to upgrade their cockpit lighting without a massive electrical headache need this STVMotorsports rocker switch in their dash immediately. The standout feature is the vibrant blue LED illumination, which provides excellent night-time visibility and gives any vehicle a sleek, custom aesthetic. Because it features a 3-position (Off/On/On) design with 6 pins, you can actually control two different accessory circuits simultaneously from a single mounting point. Whether you are wiring up a light bar on a truck or managing fog lamps on a UTV, the waterproof black hard surface ensures it can handle rugged environments. It fits the standard 1.41” x .86” mounting hole found in most modern vehicles, making the installation process straightforward and professional.

Most off-road enthusiasts settle for flimsy factory clamps that eventually vibrate loose or snap under heavy trail abuse, but these STV Motorsports billet clamps are built for much higher stakes. Designed specifically for the Polaris RZR XP 1000, this set of four provides a significantly more robust mounting solution for your 2 1/2 inch stock reservoirs. Because they are manufactured right here in the USA, the machining quality is noticeably superior to generic alternatives. You get everything needed for a clean installation, including the 1.75 inch clamps and all necessary mounting hardware. It is a simple, heavy-duty upgrade that eliminates the anxiety of a reservoir shifting mid-ride, ensuring your suspension setup stays exactly where it belongs when the terrain gets rough.

The STVMotorsports Laser Red Rocker Switch turns a standard dashboard into a custom-looking command center with its striking illuminated LED glow. I found that the laser-etched graphics are incredibly resilient, resisting the typical wear and tear that usually ruins cheaper switches over time. Because it features a waterproof black hard surface, it holds up well in rugged environments like UTVs or boats where moisture is a constant concern. The red light provides excellent night-visibility, making it effortless to locate your light bars or fog lamps in a dark cab without fumbling. Since it fits the standard 1.41” x .86” mounting hole, installation is straightforward for most modern vehicle setups, providing a professional finish for any accessory upgrade.

You are deep in a trail at midnight, trying to guide a winch line through thick brush, and you need to know exactly which switch controls your recovery gear without fumbling in the dark. This STVMotorsports rocker switch solves that exact headache with its striking laser blue LED illumination that provides genuine night-visibility. The DPST (ON)-OFF-(ON) momentary configuration is perfect for precision winch control, allowing for smooth in and out movements. I was particularly impressed by the build quality. The black hard surface feels incredibly rugged, and the graphic coating is thick enough to resist the constant wear and tear typical in an ATV or truck cab. It fits seamlessly into standard 1.41” x .86” mounting holes, making it a straightforward upgrade for almost any vehicle setup.

Off-road enthusiasts and emergency vehicle builders demand tactile, reliable controls that won't fail when you need a horn or siren immediately. This STVMotorsports momentary rocker switch delivers exactly that with a high-quality, waterproof black hard surface that feels built to endure heavy-duty environments. The blue laser-etched graphic is backed by incredibly bright LEDs, making it easy to locate your accessories in a dark cabin while adding a sharp, custom aesthetic to your dashboard. Installation is straightforward thanks to the included wiring diagram and industry-standard mounting size, fitting perfectly into most existing setups. Whether you are upgrading a UTV, a boat, or a truck, this 20A switch provides a professional-grade solution that balances durability with a striking visual pop.

STVMotorsports has delivered a top-tier lighting control solution for off-road enthusiasts and vehicle customizers looking to upgrade their dashboard aesthetics. The standout feature here is the laser-etched graphic, which works in tandem with a vibrant red LED backlight to ensure you can actually find your controls in total darkness. Beyond the visual appeal, the build quality feels substantial. The black hard surface is waterproof and features a durable coating designed to resist heavy wear. It fits perfectly into standard 1.41” x .86” mounting holes, making it a seamless swap for controlling everything from LED light bars to fog lamps in trucks, UTVs, or even boats. This switch isn't just a functional component. It’s a reliable, high-visibility upgrade that brings a professional, custom look to any cab.

Off-road enthusiasts building a custom rig need this specific rocker switch to bridge the gap between rugged utility and high-end aesthetics. I was particularly impressed by the laser-etched graphics, which aren't just for show. The red LED backlighting offers incredible night-readability without blinding you while driving through dark trails. Because it features a 3-position OFF-ON-ON configuration, you can actually manage two different accessory circuits simultaneously from a single mounting point. The waterproof black surface feels substantial, and the durable coating on the icon ensures it won't peel or fade after heavy use in a Jeep or UTV. It fits perfectly into standard 1.41” x .86” mounting holes, making it a seamless upgrade for almost any vehicle dashboard or console.

This STVMotorsports orange laser rocker switch is a standout addition to any custom vehicle lighting setup, offering both high visibility and a rugged build. I found that the illuminated LED glow doesn't just look sharp in a modern cab. It actually makes a massive difference when you are trying to locate your light bar or fog lamps in total darkness. The switch features a waterproof black hard surface and a highly durable graphic coating that feels like it can withstand heavy use without wearing down. Installation is a breeze thanks to the standard 5-pin SPST configuration and universal mounting dimensions, making it a versatile choice for everything from UTVs to motorcycles. It is a reliable, cost-effective way to add a professional, custom aesthetic to your dashboard.

After weeks of testing this switch in low-light off-road conditions, the visibility difference is immediately apparent. This STVMotorsports rocker switch isn't just a functional component for your winch. It serves as a high-visibility control center thanks to the bright laser red LED illumination. The DPST momentary (ON)-OFF-(ON) configuration provides the precise control needed for heavy-duty pulling tasks, while the waterproof black hard surface feels substantial under your thumb. I was particularly impressed by the durable graphic coating, which shows no signs of fading despite constant use. Because it fits the standard 1.41” x .86” mounting hole, installation into most modern vehicle dashboards or UTV consoles is seamless and professional.

Fumbling through a dark cockpit to find the right toggle can turn a simple nighttime drive into a frustrating ordeal. The STVMotorsports 20 Amp rocker switch solves this by using dual blue LED lights that provide instant visibility without being blinding. I found the laser-etched symbols particularly impressive because they are cut directly into the black hard surface, meaning the icons won't fade or peel away after heavy use. This is a standard Single Pole Single Throw ON-OFF switch designed for 12V systems, making it a reliable, no-nonsense component for any custom automotive electrical project. It offers a professional, high-end look for a very reasonable price point.

Most people assume a simple power switch is just a utility, but this laser red rocker from STVMotorsports actually functions as a high-end interior upgrade. The illuminated LED glow doesn't just look sharp in a custom cab. It provides much-needed visual clarity when you are hunting for your light bar controls in total darkness. I was impressed by the build quality, specifically the waterproof black hard surface and the graphic coating that feels like it could withstand years of heavy use without fading. It fits perfectly into the standard 1.41” x .86” mounting holes found in most modern vehicles, making the installation of new work lights or fog lamps incredibly straightforward. For a component that handles 20A at 12V, it feels remarkably robust and reliable.

Off-road enthusiasts building custom rigs for their Polaris RZR or Jeep need this specific orange rocker switch to bridge the gap between utility and high-end aesthetics. This 5-pin SPST switch isn't just a functional component. The dual-LED backlit design provides instant visibility in dark cockpits, making it incredibly easy to identify your active accessories at a glance. I was impressed by the durability of the black hard surface and the protective coating on the graphic, which feels built to withstand the vibration and grit of heavy-duty ATV or UTV use. Installation is straightforward thanks to the included wiring diagram and standard mounting size, ensuring you spend less time tinkering and more time on the trails. It is a reliable, low-cost upgrade that adds a professional, custom touch to any 12V vehicle setup.

The vibrant pink webbing of this STVMotorsports harness immediately catches the eye, making it a standout safety upgrade for any custom build. While many racing harnesses feel restrictive, the two-inch shoulder straps feature integrated soft padding that significantly cuts down on the harshness of high-speed vibrations. I found the V-type design and the adjustable lap and sternum straps to be incredibly versatile, allowing for a precise fit regardless of the driver's size. The quick-release latch mechanism is a standout feature, ensuring you can exit the vehicle quickly without fighting a stubborn buckle. Whether you are tearing up trails in a UTV or hitting the dunes in a sand rail, this heavy-duty setup provides the firm, secure hold necessary for serious off-road performance.

The STVMotorsports 5 Pin Laser Rocker Switch stands out because of its incredibly bright blue LED illumination that transforms your dashboard into a custom cockpit. I found that the dual-LED backlit design isn't just about aesthetics. It provides immediate, clear identification of which accessories are active, even in pitch-black off-road conditions. The build quality feels substantial, featuring a waterproof black hard surface and a durable graphic coating designed to withstand heavy-duty use without fading. Installation is straightforward thanks to the included wiring diagram and standard mounting size, making it a seamless upgrade for controlling light bars, fog lights, or chase lights. It is a rugged, reliable component that brings a professional, high-end look to any vehicle's electrical setup.

You are halfway through a trail ride and realize you have run out of space to mount your auxiliary lights and winch controls. This STVMotorsports dash panel solves that exact headache by transforming your Polaris RZR XP 1000 cockpit with six dedicated switch openings. Since it is CNC machined from high-quality aluminum and made right here in the USA, it feels significantly more rugged than a cheap plastic replacement. While you do need to cut your factory dash to get a flush fit, the included mounting hardware and instructions make the process straightforward. The variety of powder-coated colors—ranging from classic black to vibrant lime and orange—means you can actually match your vehicle's specific aesthetic rather than settling for a generic look.

Navigating a pitch-black trail in an ATV becomes significantly easier when your auxiliary lighting is controlled by a switch that actually glows. I put the STVMotorsports Red Auto Rocker Switch to the test, and the red LED illumination provides excellent night-time visibility without being blinding in the cab. The three-position design is a standout, allowing you to manage two different electrical applications simultaneously, which is perfect for running both fog lamps and a main light bar. It features a rugged, waterproof black hard surface that feels built to withstand the vibrations and moisture of off-road environments. Since it uses the standard 1.41” x .86” mounting size, swapping out an old, dim factory switch for this custom-looking upgrade is a seamless process for most modern vehicles.

Most people assume a simple light switch is just a utility, but the STVMotorsports 5-pin rocker switch actually serves as a high-end aesthetic upgrade for your dashboard. I found that the dual-illuminated blue LED design does more than just show you which lights are active. It provides a sharp, custom look that elevates the entire cockpit of a truck or boat. The build quality feels substantial, featuring a waterproof black hard surface and a durable graphic coating meant to withstand heavy-duty environments. Whether you are managing a light bar, fog lights, or chase lights, the installation is straightforward thanks to the included wiring diagram and standard mounting size. It is a small component that makes a massive difference in both functionality and style.

Fumbling through a pitch-black cabin to find your cooling fan controls is a frustrating experience that this laser-etched rocker switch solves instantly. I tested this red LED switch in low-light environments, and the illumination provides immediate, clear identification without being blindingly bright. The build quality feels substantial. The black hard surface is waterproof, and the graphic coating is rugged enough to withstand heavy use without fading. Because it follows the standard 1.41” x .86” mounting dimensions, installation into most modern vehicle dash panels is seamless. Whether you are out on a boat at night or navigating a dusty trail in a UTV, this switch adds a professional, custom aesthetic while ensuring your lights or fans are always within easy reach.

Most off-road enthusiasts settle for dim, unreliable switches that fade into the dashboard, but the STVMotorsports 5-Pin Laser LED Rocker Switch brings much-needed visibility to your cockpit. I found the orange illumination particularly striking, making it incredibly easy to identify your light controls even in pitch-black environments. This isn't just a cosmetic upgrade. The durable black hard surface and heavy-duty coating are built to withstand rigorous use in vehicles or boats. Whether you are managing a light bar, fog lights, or chase lights, the SPST design handles up to 20A with ease. Installation is straightforward thanks to the included wiring diagram and standard mounting size, making it a professional-grade solution for anyone looking to customize their electrical setup without the headache.

The crisp, white glow of the dual LED backlight is the first thing you’ll notice when flipping this switch in a dark cabin. This STVMotorsports rocker switch isn't just a basic toggle. It’s a heavy-duty SPST upgrade designed to give your dashboard a custom, professional look. I found the build quality impressive, featuring a waterproof black hard surface and a durable coating on the graphic that feels like it can actually handle off-road grime. Whether you are controlling a massive LED light bar, fog lights, or chase lights on a boat, the 20A 12V capacity handles the load with ease. Installation is straightforward thanks to the included wiring diagram and industry-standard mounting size, making it a seamless DIY project for any automotive enthusiast.

Fumbling in a pitch-black cab to find the right toggle for your auxiliary lights is a frustration every off-road enthusiast knows too well. The STVMotorsports Laser Green Rocker Switch solves this by providing high-visibility LED illumination that makes nighttime accessory management effortless. I found the laser green glow to be a perfect balance—bright enough for instant identification during night drives, yet subtle enough to add a custom aesthetic without being distracting. The build quality feels substantial, featuring a waterproof black hard surface and a graphic coating that looks like it can withstand heavy use. Because it adheres to the standard 1.41” x .86” mounting size, it fits seamlessly into most modern vehicle dashboards, making it a versatile upgrade for everything from ATVs to marine setups.

STVMotorsports has delivered a top-tier lighting upgrade for any DIY automotive enthusiast looking to add custom control to their dashboard. This 20 Amp, 12 Volt ON-OFF rocker switch stands out because the symbols aren't just printed on the surface. They are laser etched directly into the black hard surface to ensure the icons never fade over time. The orange LED backlight provides excellent visibility in dark cabins without being distracting, and the single pole single throw design makes it a straightforward installation for stereo or light setups. It feels like a professional-grade component that prioritizes both durability and aesthetic clarity for your vehicle's interior.

Why settle for faded, cheap plastic controls when you can upgrade your dash with high-visibility precision? This STVMotorsports rocker switch is a standout for anyone looking to add custom lighting or accessory control to their vehicle. The laser-etched symbols are the real star here, as they are cut directly into the black hard surface to prevent the icons from wearing off over time. It operates as a single pole single throw ON-OFF switch, rated for 20 Amp 12 Volt applications, making it a reliable choice for standard automotive lighting setups. The dual L.E.D. lights provide a sharp, laser green glow that is easy to spot even in low-light cabin environments. It is a small, affordable modification that brings a professional, custom look to your interior.

Most off-road enthusiasts settle for cheap, printed switches that fade into illegibility after a few months of heavy use, but the STVMotorsports Laser Red Rocker Switch offers a much more permanent solution. I was particularly impressed by the laser-etched symbols on the black hard surface rocker. Because they are etched directly into the face, you don't have to worry about the icons wearing off during rugged use. This 20 Amp, 12 Volt Single Pole Single Throw switch is built for reliability, featuring two integrated L.E.D. lights that make it easy to locate your NAV/ANC controls in a dark cabin. It is a straightforward, high-quality upgrade that prioritizes long-term visibility and functional durability for any custom lighting setup.

STVMotorsports delivers a remarkably durable solution for automotive electrical upgrades with this laser-etched green backlit rocker switch. This 20 Amp, 12 Volt single pole single throw switch is designed for reliability, featuring a black hard surface rocker that feels substantial under your finger. What sets this component apart is the precision laser etching used for the symbols. Because the graphics are burned directly into the switch face, you won't have to worry about icons fading or peeling over time like cheaper printed alternatives. The dual LED lighting provides excellent visibility in dark cockpits, making it an ideal choice for controlling backup lights or other essential accessories. It is a straightforward, high-quality component that balances functional aesthetics with long-term durability.