Best Superior Pump in 2026

1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10' cord length

1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter

1/3 HP Utility pump moves up to 2,400 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10' cord length

1-1/4 inch NPT discharge for hight capacity pumping; includes 3/4 inch garden hose adapter

1/3 HP Sump pump moves up to 2,760 gallons per hour; pump will lift water up to 25' of vertical height

Rugged cast iron construction; 10-foot cord length

Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches

Universal design works with many pumps; For use with sump and utility pumps

Non-mercury activated switch

10-foot water resistant power cord with piggyback plug, Includes mounting bracket and clamp

25-Foot discharge kit for use with most sump and utility pumps

1-1/2-Inch by 25-foot reinforced PVC lay-flat hose

Easily rolls up for compact storage

1/4 HP Sump pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10-foot cord length

Tethered float switch to automatically turn the pump on/off

Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet

1/2 HP Cast Iron Sewage Pump with Vertical Float Switch; 2 in. discharge; 2 in. solids handling; non-clogging vortex impeller

19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops

PROFLO's Simplex Pre-Assembled Sewage System

Submersible Sewage/Ejector Pump w/ Vertical Float Switch

1/2 HP split capacitor motor (3450 RPM)

Select 2-Gallon Descaler Pump Kit is designed to clean and descale most Tankless Water Heaters

Descaler kit includes a fully submersible mag drive utility pump, 2 gallon pail with top lid, two 3/4 in. GHT X 5 ft. rubber hoses, and 7oz. non-toxic descaler powder

Mag drive utility pump moves up to 810 Gal. per hour; Built-in adjustable control valve to control flow; Oil-free motor design

Will fit any 1-1/4-inch or 1-1/2-inch NPT male or female thread

Made from durable ABS plastic

High quality Nitril-Bruna N seal

Monitors liquid levels in sump and sewage basins, holding tanks and other water applications

Non-corrosive NEMA enclosure, rated for indoor use

9 Volt battery backup, battery not included

1/2 HP Sump pump moves up to 3600-gallons per hour; Will handle liquids up to 180-degrees Fahrenheit

Rugged stainless steel and cast iron construction

Non-corrosive, solid steel drive shaft, float ball, and impeller; 1-1/2 inch NPT discharge

Universal design works with many pumps; For use with sump and utility pumps

Non-mercury activated switch

10-foot water resistant power cord with piggyback plug

1/2 HP Sump pump moves up to 4500-gallons per hour; pumps water up to 25-vertical feet

Rugged stainless steel and cast iron construction; Continuous duty, thermally protected split capacitor motor

2-inch discharge for high capacity pumping; Handles up to 1/2 inch solids; cULus Listed, CSA Certified

1 HP Sump pump moves up to 5160-gallons per hour; pumps water up to 25-vertical feet

Rugged stainless steel and cast iron construction; Continuous duty, thermally protected split capacitor motor

2-inch discharge for high capacity pumping; Handles up to 1/2 inch solids; cULus Listed, CSA Certified

1/3 HP submersible thermoplastic sump pump, handles 3/8 inch solids, vertical float switch

Will handle temperatures up to 120 degree F

15-inch x 13.5-inch corrosion resistant structural foam basin with gasket sealed air tight cover

1/2 HP Sewage pump moves up to 4,800 gallons per hour; pump will lift water up to 25' of vertical height

Rugged cast iron construction; 10' cord length

Tethered float switch to automatically turn the pump on/off.

1/2 HP Sump pump moves up to 3,300 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10-foot cord length

Vertical float switch to automatically turn the pump on/off

1/3 HP Sump pump moves up to 2,880 gallons per hour; pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10-foot cord length

Vertical float switch to automatically turn the pump on/off

1/3 HP Sump pump moves up to 3,000 gallons per hour; pump will lift water up to 20' of vertical height

Tough thermoplastic construction; 10' cord length

Durable non corrosive steel drive shaft and stainless steel impeller; metal switch arm for strength and durability

1/50 HP Thermally protected fan cooled 115 Volt motor with automatic operation and stainless steel motor shaft

Pump will move up to 88 gallons per hour and max head of 18 vertical feet

3/8" barbed discharge with built in check valve; 1/2 Gallon collection tank with four 1-1/8" inlet openings and removable caps

12 Volt Sump pump moves up to 1,380 gallons per hour, pump will lift water up to 25' of vertical height

Tough thermoplastic construction; 10-foot cord length

Tethered float switch to automatically turn the pump on/off

Will pump up to 11.8 gallons per minute at 40psi

Rugged cast iron pump body and seal plate with premounted fully adjustable pressure switch, dual voltage motor (115/230v) with thermal overload protection

1-1/4 inch NPT suction, 1 inch NPT discharge / drive ports, tough thermoplastic impeller and glass filled thermoplastic diffuser

Will pump up to 10 gallons per minute at 40psi

Rugged cast iron pump body and seal plate with premounted fully adjustable pressure switch, dual voltage motor (115/230v) with thermal overload protection

1-1/4-inch NPT suction, 1-inch NPT discharge / drive ports, tough thermoplastic impeller and glass filled thermoplastic diffuser

1/2 HP Transfer pump moves up to 1500-gallons per hour; Continuous duty, thermally protected split capacitor motor

Includes: brass garden hose adapters, suction strainer, and an additional set of motor brushes

Features: 3/4-inch NPT suction and discharge; 10-foot power cord; Built-in carrying handle (NOT recommended for use as a sprinkler pump or booster)

1/2 HP Shallow well jet with tank pumps water from well up to 25-vertical feet to lift; For use in shallow well applications up to 25-feet

Rugged cast iron construction; Tough thermoplastic impeller and glass filled thermoplastic diffuser. Max Flow Rate : 12.5 GPM

Continuous duty, thermally protected split capacitor motor; Dual voltage motor (115/230V), cULus Listed

1 HP Cast iron convertible jet pump moves water from well up to 80-vertical feet to lift; Can be used in deep well applications up to 80 feet

Rugged cast iron construction; Tough thermoplastic impeller and glass filled thermoplastic diffuser

Continuous duty, thermally protected split capacitor motor; Dual voltage motor (115/230V) and includes ejector kit, cULus Listed

Will pump up to 7 gallons per minute at 40psi

Rugged cast iron pump body and seal plate with premounted fully adjustable pressure switch, dual voltage motor (115/230v) with thermal overload protection

1-1/4 inch NPT suction, 1 inch NPT discharge / drive ports, tough thermoplastic impeller, glass filled thermoplastic diffuser, and includes ejector kit

Will pump up to 9.8 gallons per minute at 40psi

Rugged cast iron pump body and seal plate with premounted fully adjustable pressure switch, dual voltage motor (115/230v) with thermal overload protection

1-1/4 inch NPT suction, 1 inch NPT discharge / drive ports, tough thermoplastic impeller, glass filled thermoplastic diffuser, and includes ejector kit

1/2 HP Sump pump moves up to 4,200 gallons per hour; pump will lift water up to 25' of vertical height

Rugged cast iron construction; 10-foot cord length

Vertical float switch to automatically turn the pump on/off