Best Teantech in 2026

【High Material】:This recessed hatch handles make of Marine Grade 316 Stainless Steel, durable and Corrosion Resistant for a long time to use

【Size for Face Plate】: 3-inch X 2-1/4 inch (57mm x 76mm), Thickness: 0.36"(9mm)

【Length Between 2 Holes】: The flush ring pull handle Mounting hole to mounting hole length: 1inch (25mm) and 2.6 inch (66mm)

✔️【Great Compatibility】The bracket kit can be used with serpentine V-belt applications.Suitable and replacement for Chevrolet small-block engine 350 with long water pump and the alternator on the vehicles

✔️【Premium Quality】: This alternator mount is made of high quality billet Aluminum material, which is sturdy, not easy to age sturdy and durable, impact-resistant, corrosion-resistant and wear-resistant to ensure maximum strength and durability for long use

✔️【Good Performance】: SBC alternator mounting bracket, Chrome Polished Surface with not fading and stainless, the surface of the alternator mount increases corrosion and rust resistance, increase smooth and bright color, great look for your engine

✔️【Durable material 】: Made of high quality ABS plastic material, strong and durable,can be used for a long time.

✔️【Perfect replacement 】: Direct aftermarket upgrade replacement for stock plastic hood release latch opener.

✔️【Easy installation】: Directly to install , no need to replace the entire cable assembly, just replace the Broken Handle with this New handle. Remove trim which pops off no hardware, Then remove a torque head bolt . Then remove the cable. Reverse order for install.

【Upgrade Large Tarp Clips】: Unique design bigger heavy duty Tarp clip is 6 Rows of Teeth, More wider 1.73 inch (4.4cm) and Head that increase bite area that enhance bite force and will not damage your tent or your other cover, more Powerful Bite Force and more stable

【Withstanding Strong Wind】: Max Withstanding Strong Wind to Force 11 Wind As long as the tent or cover doesn't be teared in strong winds, this strong large Withstand strong wind and snow tarp clamps will Bite firmly into the tent or other Covers, Waterproof, Wind Resistance

【Load/Weight Capacity】: Wider Mouth and Head designed enhance Stronger Bite Force Loaded Bearing about 110.23 lb-155 lb (50-70KG), Tested by our own, the Loaded Bearing is up to 155 lb /70KG, securing large truck loads cover, ideal for building gardens Pergola Greenhouse etc

Square Generic Tape Drives belt

Superior wear resistance and the right traction but without deformation

Premium both the duration and the ability to absorb vibrations

Flat generic tape cassette player recorder drive belts

4mm Width, 40mm to 135mm mix package fit most devices

Rubber Belt Superior wear resistance and the right traction but without deformation

【General Fitment】: This go kart clutch and chain fit for Go Kart Minibike Yerf-Dog karts with Tecumseh

【Fitment】: Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft. Tecumseh Engines 2-6.5 HP with 3/4" Shaft

【Product Detail】: 3/4" Bore 10T Sprocket with 40/41/420 Chain designed for 2-7Hp 212cc Predator engines clutch performance parts

🚩Lightweight and compact size offers convenient operation and updated installation (May be you will get the light Blue Flow Meter, please do not worried, they are the same product, just the color is different)

🚩Modular Design: Makes diesel fuel flow meter suitable for use with output modules, sensors and remote transmitters

🚩Digital LCD Display : High-definition displays show both instantaneous and cumulative flow with NPT Counter

【Have a Certain Waterproof Effect】: Compared with other flowmeter, we optimized the mold, so that ours has a Certain Waterproof Effect. 1" inch ow meter Pretty and more professional LCD Turbine Fuel Flow Meter designed by own, Maximum Working Pressure is 6 RAR

【Modular Design】: Professional Turbine flow meter Makes diesel fuel flow meter suitable for use with output modules, sensors and remote transmitters, flow rate is 15L/min -120L/min

【Digital LCD Display】 : 4.18 * 2.67cm LCD Screen, High-definition displays show both instantaneous and cumulative flow with NPT Counter

Size & Portable Feature: Included 1 PCs flow meter and 2 PCs 3/4 inch adaptor, lightweight and compact size offers convenient operation and updated installation, Maximum working pressure: 20BAR

Modular Design: Turbine flow meter Makes diesel fuel flow meter suitable for use with output modules, sensors and remote transmitters, Working temperature: -10°C ~ +60°C

Digital LCD Display : High-definition displays show both instantaneous and cumulative flow with NPT Counter, 3/4" Flow range: 15-120L / Min

Headlamp retaining spring clips are made of high-quality Stainless steel, durable and not easy to break

The Universal spring clips kit includes 9 PCs (3 types and 3 sizes) different size headlamp bulb retaining clips

The spring clips are suitable for most clips on the H1, H3, H4 & H7 bulbs and some others

【High Quality】: Adopted with automotive grade ABS plastic, anti slight impact light cover is durable, please contact us immediately when there is any problem with it, we will handle it for your within 24 hours

【Corner Light Protection】: This corner signal lamp can effectively protect your corners from scratches, bumps or other destructive signs, providing your driving with more adequate lighting to ensure your safety.

【Perfect Replacement】: Corner Light Lamp Lens is a perfect replacement for your scratched or broken corner light lens due to the manufacture of original standard.

✔️6 kinds of headlamp bulb retaining spring clips

✔️Includes 2 types & 3 sizes which could replace the original clips

✔️Headlamp retaining spring clip is made of high-quality metal,stable function and high reliability.

50PCs of 4 mm Width Flat generic tape cassette player recorder drive belts, 40mm to 135mm mix package fit most devices

50PCs of 1 mm Width Square generic tape rubber belts, 40mm to 135mm mix package fit most devices

Rubber Belt Superior wear resistance and the right traction but without deformation

Stainless steel self draining recessed cup holder , Install almost anywhere; table, counter top, dashboard, seatback, etc.

Replaces plastic drop-in cup holders with ease.

Made of stainless steel for supreme corrosion resistance.

【Universal Size】Compact dimensions of 4" H - 3 1/2"ID, and 4 1/4" OD with flange make it a perfect fit for a range of beverage containers.

【High Quality】Premium corrosion-resistant stainless steel construction ensures durability and longevity.

【Efficient Design】 Say goodbye to flimsy plastic drop-in cup holders and upgrade to the long-lasting stainless steel option.

Made of stainless steel for supreme corrosion resistance.

Includes drain with hose barb, mounting gasket and internal pad.

Dimensions: 4" H - 3 1/2"ID, 4 1/4" OD, with flange.

Add this Boat Plug Holder for your Boat's Key chain.

Never Forget to put your Boat's Drain Plug again.

Don't Carry an Adjustable Tool; or is it Rusted? No worries -This is your new Tool.

Designed to secure tow lines or trailer winch hook

Size: 3/8 inch

Face Plate Size: ¾ inch x 2-1/4 inch

【Package】 This boat cup holder set contains 2 cup drink holders, 8 mounting screws. Single Cup Holder Dimensions: 3.1" x 3.4" x 3.2" (L*W*H). Gives you permanent and convenient space to place your drinks.

【High Quality Material】 Premium stainless steel boat ring cup drink holders. Surface polishing design, anti-rust and corrosion-resistant. Steel wire stands up to the harshest conditions.

【L-shaped opening design】Wall-mounted cup holder with "L"-shaped outlet, convenient for cups with handles/ears to put in and take out. Fits various cans, mugs, cups, and bottles of different drinks.

1).High Quality ➯ This boat cup holder is made of high grade stainless steel.The surface is brushed,good texture,corrosion resistance and durable.

2).Drain at bottom ➯Includes drain with hose barb;Self- draining hole is benefit to drain away water and applied for freshwater or saltwater.

3).Internal pad ➯Black pad inside to protect your cups;Corrosion resistance, anti vibration,can withstand severe cold and exposure.

Versatile, flexible and reliable grab point

Can be installed on swim platform, in cockpit, in companionway

Can be mounted onto irregular surfaces and angles

Desinged to seal or conceal instrument installation or access holes

Outside Diameter: 7-5/8 inch

Suitable for hole sizes up to 6 inch

Extendable Fiberglass Pole (3 Sizes)

Quick Lock and Release Mechanism

Removable Flexible Loop (Standard/XL)

Extendable Fiberglass Pole (3 Sizes)

Quick Lock and Release Mechanism

Removable Flexible Loop (Standard/XL)

Boat stern bow eye tie down U bolt stainless steel sold by pair

U bolt marine, nuts and washers made of marine grade stainless steel

Boat u bolt machined AISI 316 stainless and this u bolt is short version please check the size before order

Bimini top pins with lanyard quick release are about total 11 inch length.

Bimini top pins with lanyard are made of stainless steel.

Boat pull pins with lanyard for boat tops and support poles & boat top bimini support.

Extendable Fiberglass Pole (3 Sizes)

Quick Lock and Release Mechanism

Removable Flexible Loop (Standard/XL)

2 PCS Amadget Stainless Steel Jaw Slide

7/8" ID(inside diameter), Fits 7/8" OD Round Tubing, Pin: 1/4"

316 stainless steel construction

Marine Grade 316 Stainless Steel- Transom Mount ski tow eye,highly polished,corrosion resistance and durability in the saltwater environment

Solid Construction-(9.5mm Thickness)4 inch Length;2-1/2" Ring, 3/8"-16 x 2" Thread Length

Easy to install with screws,mounting hardware included.High polished surface for mirror-like appearance and to match modern watercraft/boat/yacht