Best Telpro in 2026

Genuine Panel lift brand

Easy assembly – no tools required

Tilting cradle

Made in the USA

Extends the reach of your standard 138-2 or 125 model PANELLIFT by 4-Feet

Preloaded cable simplifies installation and removal of the Extension

Made in USA

1000 lb. load rating

Uniquely adjustable platform from 2 feet to 11 feet

√ 【One-hand carrying】 : Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift

√ 【Application】 : Heavy Duty Holder for Carrying Dry Wall,Plywood - the most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and stabs. Use the gripper to grip and carry MDO or MDF panels, OSB, melamine, drywall , tabletops, sheep metal, and other sheet goods.The self-adjusting gripper accommodates panel thicknesses of 0 to 3/4 inch

√ 【Special feature】: Grip handle for one-hand carrying, this panel/poly wood lifter features a durable , impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds and holds up to two sheets or panels. Get the job quickly with this convenient sheet and panel mover .

【Easy to assemble and disassemble】The drywall lift is very solidly built , The Drywall Panel Hoist is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster

【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Drywall Panel Hoist allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift

【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Drywall Panel Hoist does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel

Diversified Tools Pocket Kicker is a versatile drywall tool - foot lifter, kicker, rasp, and pry tool.

Lifts wallboard, doors, drywall, paneling, and tiles into position with ease.

Easily accessible - Fits in your pocket or tool belt, replaces heavy lifters and large costly rasps.

Made in the USA

Increases the reach on any PANELLIFT Drywall Lift by 18-Inch

Installs in seconds

Drywall lift can be assembled or disassembled in seconds with not tools required

Tilting cradle brings loading height down to 34 inches for easy installation of drywall to walls. sloped or level ceilings up to 11-Feet tall

Integral cradle outriggers extend to handle up to 4-by-16-foot sheets

Product 1: Ready for the jobsite: meets OSHA and ANSI standards

Product 1: Holds up to 1000 pounds of people, tools and materials

Product 1: Stackable design allows two units to combine for a platform over 12 feet tall

DRYWALL TAPING MADE SIMPLER & EASIER - Unlike taping drywall seams completely by hand w/ drywall mud & a taping knife, TapeBuddy drywall taping tool solves that with ONE STEP by applying mud directly to the tape. Simply pull & cut the coated drywall tape to the desired length - apply - then embed the tape with your drywall taping knife. Simple Set Up - Makes taping Easier - Drastically Reduces Overall Time, Mess, Material Waste & Excessive Sanding

NO EXPERIENCE NECESSARY: Build your confidence of using the TapeBuddy Drywall Taping Tool with convenient learning resources here. Watch the How-To videos on the listing main images area AND inside the Buddy Tools LLC storefront page hyperlink shown below the products title. A Downloadable FAQ PDF located below the What's in the box section and under the Product Guides and document of this listing is a great resource to use now. With each TapeBuddy, it'll come with a printed How-Guide too!

SAVES STRESS & MESS: With TapeBuddy applying more joint compound to the center of the tape, you no longer have to worry about tape bubbles and excessive mud all over your walls that you'll end up having to use a drywall sander to smooth out. Made to last a lifetime, it'll keep more money in your pocket where it's needed most.

MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a cabinet jack, drywall jack, crown moldings, range hood, ratcheting cargo bar support pole and so on.

DURABLE EXTENSION POLE: All the XINQIAO support poles are GS certified. Weight capacity: 154 lb (70 kg). The pole jack is made of strong metal and the handle is cast in premium aluminum. Non-slip TPR base, leaving no scratches, are best for various working conditions.

ADJUSTABLE LABOR SAVING ARM: The adjustable height and textured rubber face help hold the rod tight for various purposes. We have 2 lengths available. 1, Medium Rod: 23.6 in to 45.3 in; 2, Long Rod: 49.2 in to 114.2 in. Sold in 1 PC, 2 PC, and 3 PC set. Please select the desired length and set.

MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a cabinet jack, drywall jack, crown moldings, range hood, ratcheting cargo bar support pole and so on.

DURABLE EXTENSION POLE: All the XINQIAO support poles are GS certified. Weight capacity: 154 lb (70 kg). The pole jack is made of strong metal and the handle is cast in premium aluminum. Non-slip TPR base, leaving no scratches, are best for various working conditions.

ADJUSTABLE LABOR SAVING ARM: The adjustable height and textured rubber face help hold the rod tight for various purposes. We have 2 lengths available. 1, Medium Rod: 23.6 in to 45.3 in; 2, Long Rod: 49.2 in to 114.2 in. Sold in 1 PC, 2 PC, and 3 PC set. Please select the desired length and set.

MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a cabinet jack, drywall jack, crown moldings, range hood, ratcheting cargo bar support pole and so on.

DURABLE EXTENSION POLE: All the XINQIAO support poles are GS certified. Weight capacity: 154 lb (70 kg). The pole jack is made of strong metal and the handle is cast in premium aluminum. Non-slip TPR base, leaving no scratches, are best for various working conditions.

ADJUSTABLE LABOR SAVING ARM: The adjustable height and textured rubber face help hold the rod tight for various purposes. We have 2 lengths available. 1, Medium Rod: 23.6 in to 45.3 in; 2, Long Rod: 49.2 in to 114.2 in. Sold in 1 PC, 2 PC, and 4 PC set. Please select the desired length and set.

This drywall lift fits all standard sizes of drywall sheets and sheetrock

The drywall tool also features a non-clogging drywall rasp with protective guides

Small compact design allows this lifter tool to fit in your pocket

Tough Leverage Construction - The leverage created by the weight of the panel and the unique jaws make it easy operate by 1 person, 1 hand; Dual-arm design and impact-resistant carbon steel ensuring a strong traction

Self-adjusting Gripper Clamp - Golablatt panel lifter features the firmly durable, impact-resistant fiberglass with rubberized TPU gripping pads mounted on both clamping plates increased friction of contact to prevent slipping and protect the surfaces of the sheet from being damaged.Suitable panel thicknesses up to 1 inch thick

Safe & Energy-efficient - The weight is distributed evenly when the carrying clamp handle is placed centrally on the panel. The clamp grips tight as you lift. It allows you to lift and move sheet with a straight back, eliminating the requirement of bending over to get under the bottom. Less weight pressure with this tool and greatly reduced risk of injury to the back, neck, shoulders and arms

Foot-operated lever for raising drywall panels off the ground for easier lifting

Metal for strength and durability

Lifts all standard size drywall sheets

Quick - Speeds up boarding a ceiling by 50% (2 in a set)

Effort - Take the neck ache out of holding up plasterboard sheets

Flexible - Allows one person efficiently board ceilings

ABS engineering plastic, anti-decoupling design to prevent goods falling down, ensure safe operation, TRA non-sliding material handle.

Excellent way to carry drywall, plywood, or solar panels,Reduces back strain, improves safety, and speeds up walking with a panel.

Size: 14.4" L ×6.5" W,Handle width 5.1" ，Base Plate width 2.6".

【UPGRADED MULTIFUNCTIONAL JACK】: Wall tile leveling device, the height can be easily adjusted by pressing the handle. All steel floor super high quality force saving arm is used for lifting, pressing, precise fastening and control. Free height adjustment, accurate positioning, fast lifting

【ALL STEEL SOLID BASE, LOAD-BEARING AND DURABLE】: Innovative lifting tool, thickened double clip solid steel bottom plate, stable center of gravity, Two are used at the same time, bearing200 pounds, and 3.2 inches of lifting capacity through handle adjustment spring. Selected high strength spring, longer service life

【COMFORTABLE HANDLE, PRECISION CONTROLLABLE】: Saving arm design, comfortable and labor-saving handle, hand-held design, grip handle can quickly rise. Press the plate gently to lower quickly. It can help the installation personnel to complete the work easily, relieve fatigue and work efficiently

One Person Operation

All welded steel construction

Tilts 65° laterally for easy loading and for installation on sloped ceilings

【Easy to use】Make a two-person job to a one-person job. A very good lifting tool that can easily lift the door and complete the installation of the hanging door alone.

【Multi-function tool】With multiple functions of door installation tools, file, and bottle opener

【Exquisite and compact】 It can be put in a tool bag and be carried easily with you.

✅【Self-adjusting Gripper Clamp Width】This innovative tool can hold up to two panels or sheets simultaneously.Simple design that allows the clamp to grip a variety of different kinds of panels and sheet goods. When you start lifting, the clamp automatically adjusts the width depend on the thickness of the panel or sheet.

✅【Easy on your back】 Traditionally carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift.

✅【Only one-hand carrying】Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift.

Adjustable Length Drywall Carrier, Low Center of Gravity, Gripping, Easy Storage

Flexible Strap and Large Heavy Duty Rubber Grip Handle

Compact for Storage and Transport, May Fit In Your Pocket

Powerful winch crank: Contractor-grade drywall lift features a new and improved advanced gear system, providing easier lifting, positioning and installation of drywall, sheetrock and wood panels on ceilings or walls, for stress-free and efficient work. Telescoping mast allows for quick and smooth sheetrock raising/lowering, accommodating panels up to 4' x 16' in size.

Superior reach: Simply and easily hoists panels overhead, as lift features an 11' reach for flat ceilings. Large cradle extends to 7' in width, rotates 360 degrees and tilts 65 degrees forward for use on both flat and sloped ceilings.

Stable & secure: Cradle features auto-locking outriggers and panel support tabs to hold panels in place and the entire unit is supported by a 4' wide tripod base with anti-slip locking casters for secure mounting.

【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools.

【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.

【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism.

√ 150LBS 16'-19' Drywall Lift--Heavy duty steel construction, Max Load Capacity: 150 LBS

√ Hoist Up on Walls/Ceilings--Lifts 16' Ceiling & 19' Wall,Apply various Drywall panels up to 4ftx16ft

√ Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.

MATERIAL: The drywall carrier is made of ABS plastic, the handle covered with TPR rubber, which has anti-slipping function

SIZE: 6.5 inches×14.6 inches (L×W), the width of handle part is 5.1 inches

GREAT LABOR SAVER: This is a simple and inexpensive but clever device that makes carrying a full sheet of plywood, drywall, hardboard by one people easily. With this panel carrier, you will have longer hands, because it grabs the bottom with the tool and you hold the tool at a higher level giving the ability to stabilize and carry the board

💪【MULTIPLE USAGE】This 3rd hand support system is well made and handy for lots of woodworking projects such as a brace, jack, or support for drywall, crown moldings, cabinets hand and so on. It can also be used for a cargo bar.

💪【DURABLE EXTENSION POLE】The extendable rod has GS certification. The weight capacity is 198 lb (90 kg). The stem rod is made of high-density metal and the handle is cast in premium aluminum. Non-slip TPR pads meet various working conditions.

💪【ADJUSTABLE SUPPORT TOOL】The adjustable height and textured rubber face help hold the rod tight for various purposes. Support Rod expands from 15.75 to 23.6 in (40 to 60 cm). The handle is used for minute adjustment.

MULTIPLE USAGE: This 3rd hand support system is well made and handy for lots of woodworking projects such as a cabinet jack, drywall jack, crown moldings, range hood, ratcheting cargo bar support pole and so on.

DURABLE EXTENSION POLE: All the XINQIAO support poles are GS certified. Weight capacity: 154 lb (70 kg). The pole jack is made of strong metal and the handle is cast in premium aluminum. Non-slip TPR base, leaving no scratches, are best for various working conditions.

ADJUSTABLE LABOR SAVING ARM: The adjustable height and textured rubber face help hold the rod tight for various purposes. We have 3 lengths available. 1, Short Rod: expands from 18.5 in to 29.5 in; 2, Medium Rod: 23.6 in to 45.3 in; 3, Long Rod: 49.2 in to 114.2 in. Sold in 1 PC, 2 PC, and 3 PC set. Please select the desired length and set.

【UPGRADED MULTIFUNCTIONAL JACK】: Wall tile leveling device, the height can be easily adjusted by pressing the handle. All steel floor super high quality force saving arm is used for lifting, pressing, precise fastening and control. Free height adjustment, accurate positioning, fast lifting

【ALL STEEL SOLID BASE, LOAD-BEARING AND DURABLE】: Innovative lifting tool, thickened double clip solid steel bottom plate, stable center of gravity, lifting capacity of 200 pounds, and 3.2 inches of lifting capacity through handle adjustment spring. Selected high strength spring, longer service life

【COMFORTABLE HANDLE, PRECISION CONTROLLABLE】: Saving arm design, comfortable and labor-saving handle, hand-held design, grip handle can quickly rise. Press the plate gently to lower quickly. It can help the installation personnel to complete the work easily, relieve fatigue and work efficiently