Best Temo in 2026

100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 60 coarse

100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter; 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels; 1/8" (3.175mm) shank size (for Dremel and other Rotary Tools)

Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.

100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 120 medium

100 piece 1/2" (12.7mm) 120 Grit, 1/2" (12.7mm) Diameter; 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels; 1/8" (3.175mm) shank size (for Dremel and other Rotary Tools)

Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.

9 pieces of Impact Torx Star 6 point Socket Bit Set Kits: T20 25 30 40 45 50 55 60 70

The socket bits are 3-1/8" (80mm) long.

1/2" (12.7mm) Sqaure Drive with drive release holes.

10 pieces durable shiny Collet bits # 480 for 1/8”(3.175mm) diameter bits.

Collets are all 3/4" (19.05mm) long.

for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fit many other compatible rotary tools.

50 piece set of durable, shiny Collet bits # 480 for 1/8”(3.175mm) diameter bits.

Collets are all 3/4" (19.05mm) long.

Will for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fit many other compatible rotary tools.

Includes 98 pc popular range of bits for professional users. All bits are forged with S2 steel for maximum durability. Comes with a heavy duty PVC storage kit.

Include one quick release chuck: the chuck hold bit very tight. No more wiggling as commonly happens on magnetic bit holder. Bits release by pull back the blue release ring. The package also include one magnetic bit holder.

Phillips: #00, #0, #1, #1, #2, #2, #3, #4 & Slotted: 3/4/4.5/5/5.5/6/6.5/7/8mm & Pozi: #1, #2, #2, #3, #4 & Hex:1.5/2/2.5/3/4/5/5.5/6/7/8mm, 1/16" (1.59mm), 5/64" (1.98mm), 3/32" (2.38mm), 7/64" (2.78mm), 1/8" (3.175mm), 9/64" (3.57mm), 5/32" (3.97mm), 3/16" (4.76mm), 7/32" (5.56mm), 1/4" (6.35mm)

10pc 1/4" Power Socket Extension adapter Bit Set for Impact Driver

Chrome Vanadium steel for heavy duty impact drill/driver use

1/4" head to 1/4" shank socket extender

Quick Release Security Screwdriver Bit Holder 1/4" (6.35mm) Hex Shank Impact Ready 2 pack

Bit holder for all hex screwdriver bits

Eliminates wobbling and slipping while driving screws

25 pc T20 Torx Double Ended 2 Inch (50mm) Screwdriver Insert Bits

Made of S2 steel for maximum durability.

Bits are impact ready. Suitable for both hand tool and electric tool

42" Rotary Grinder Tool Flexible Flex Shaft for Dremel and compatible rotary tools

This is a 42” grinder attachment which fits the majority of rotary tools. connection is for head with 3/4" (19.05mm) thread. for Dremel models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12, etc. If you're a DIY-er, hobbyist or craft worker turn your rotary tool into a grinder with this flexible shaft attachment.

Rotary tools are incredibly versatile and this accessory gives you even more functions. Plus, the flexi rubber non-slip shaft lets you take really control over the job in hand. Bit installation instruction: 1) insert the L bar included into the hole at the collet side of the shaft. 2) unscrew the shaft collet nut. 3)insert bit, not included, into the shaft collet 4)tighten shaft collet nut. 5) remove the L bar

10 PC 1/8" (3.175mm) SHANK HSS TITANIUM ROUTER BITS for DREMEL

The router bits for dremel or other rotary tools. Titanium Nitride Coated for longer life; 1/4" (6.35mm) Head Size; Includes wood storage case

The set include 10 piece router bits with 1/8" (3.175mm) shank.

42" Rotary Grinder Tool Flexible Flex Shaft for Dremel and compatible rotary tools

This is a 42” grinder attachment which fits the majority of rotary tools. connection is for head with 3/4" (19.05mm) thread. for Dremel models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12, etc. If you're a DIY-er, hobbyist or craft worker turn your rotary tool into a grinder with this flexible shaft attachment.

Rotary tools are incredibly versatile and this accessory gives you even more functions. Plus, the flexi rubber non-slip shaft lets you take really control over the job in hand. Bit installation instruction: 1) insert the L bar included into the hole at the collet side of the shaft. 2) unscrew the shaft collet nut. 3)insert bit, not included, into the shaft collet 4)tighten shaft collet nut. 5) remove the L bar

Super-handy rotary tool accessory - keeps tool handy, out of the way; essential for flex shaft use

3-section steel rod allows customized tool height, adjusts easily from 10 - 22 inches.

Heavy-duty table-bench clamp can be used horizontal or vertical; 2-1/2 inch clamping capacity

Sizes included: 1/8", 3/32", 1/16", 3/64", and 1/32" cutting heads

1.5" length. 1/8" shank diameter.

Comes in convenient case with compartment for each bit.

25pc 1/8" Slotted Flat Head 2 Inch (50mm) Screwdriver Insert Bits

Made of S2 steel for maximum durability.

Bits are impact ready. Suitable for both hand tool and electric tool

Carbide Downcut Inlay Router Bit 3/64" dia.

1.5" length. 1/8" shank diameter.

Comes in convenient case with compartment for each bit.

25 pc H-4 Hex 4mm Screwdriver Insert Bits in a storage box.

All bits are 2" Long with 1/4" (6.35mm) Shank

Industrial quality with quick release slot

5 pc TUNGSTEN Double Cut CARBIDE ROTARY BURR TOOL SET 1/4" (6.35mm) SHANK

Burrs have double cut head with exact 1/4" (6.35mm) shank and 1/2" (12.7mm) or 3/8" (9.52mm) head diameters.

All burrs are made with tungsten carbide and are suitable for deburring and polishing cast iron, cast steel, carbon steel, alloy steel, stainless steel and other materials up to HRC65 hardness.

The set includes 100 pc 414 Felt Polishing 1/2" (12.7mm) Diameter x 1/4" (6.35mm) Thick Wheels with 2 pc 1/8" (3.175mm) shank screw mandrel 401.

Rotary tool accessories, felt-tipped, made of top quality wool, for Dremel.

Smooth and refine surfaces by using these felt buffs to polish or grind metal, ceramics and glass.

2 pc 8-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation.

Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling.

Wheel Nut Removal Socket Set including 22 PC 17mm socket: 51/6PT, 52/7PT, 53/8PT, 54/9PT, 55/10PT, 56/11PT, 57/12PT, 58/13PT, 59/14PT, 60/15PT, 61/16PT, 62/17PT, ABC0/10PT, ABC1/11PT, ABC2/13PT, ABC3/14PT, ABC4/15PT, ABC5/16PT, ABC6/17PT, ABC7/19PT, ABC8/20PT, ABC9/21PT.

They are used to remove wheel nut screws on Pre 2010 “non “cloverleaf” style locking wheel nuts. for Polo, Beetle, Golf, Jetta, Scirocco, Passat, Sharan, Touran, Tiguan.

Includes a durable plastic tool case with a latch. The case is 9" X 6" X 2-1/2". When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time. This helps reduce pressure on the remaining nuts.

New assorted 3-12mm (1/8" to 1/2") PREMIUM diamond coated hole saw (total: 10 pcs, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 mm).

Manufactured by GRIT 50 premium type diamond sands specail for cutting.

Suitable for use in drill hole on glass, marble, tile or granite.

25pc Clutch 3/16" 2 Inch (50mm) Screwdriver Insert Bits

Made of S2 steel for maximum durability.

Bits are impact ready. Suitable for both hand tool and electric tool

Wheel Nut Removal Socket Set Including 20 PC 17mm socket: #521, #522, #523, #524, #525, #526, #527, #528, #529, #530, #531, #532, #533, #534, #535, #536, #537, #538, #539, #540.

They are used to remove or lock wheel anti-theft screws for VAG vehicles including UP, Polo 2010>, Beetle 2012>, Golf 2009>, Jetta 2011>/, EOS, Scirocco, Passat 2006>, Sharan, Touran, Tiguan.

Includes a durable plastic tool case with a latch. The case is 9" X 6" X 2-1/2". When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time. This helps reduce pressure on the remaining nuts.

25pc Clutch 1/4" 2 Inch (50mm) Screwdriver Insert Bits

Made of S2 steel for maximum durability.

Bits are impact ready. Suitable for both hand tool and electric tool

25pc Spanner #10 2-Inch (50mm) Screwdriver Insert Bits

Made of S2 steel for maximum durability.

Bits are impact ready. Suitable for both hand tool and electric tool

Wheel Nut Removal Socket Set Including 20 PC 17mm socket: #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56, #57, #58, #59, #60.

They are used to remove or lock wheel anti-theft screws for BMW: 1 Series F20/F21, 3 Series F30/F31, 4 Series F32/F34/F36, 5 Series F10/F11, 6 Series F12/F13 and 7 Series F01/F02/F04.

Designed to fit OE style BMW wheel nuts. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time. This helps reduce pressure on the remaining nuts.

New one box set of 30 pieces diamond coated burrs with pointed heads in box set.

They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8" collet. Shank diameter : 3.17mm (1/8 inch)

included 1/16" (1.59mm) diamond drill bits in a medium grit, for drilling glass, shells, tile and stone.

5 Lathe Mill Center Drill Countersink (Sizes 1# 2# 3# 4# 5#)

Made with M2 High Speed Steel (HSS)

Each bit is double ended.

Self-centering point penetrates material without the need of a pilot hole.

Straight flutes for easy control and clean and precise drilling.

Spade point for drilling broken taps and bolts.