Best Tisino in 2026

Tisino Balanced 1/4 to XLR Male Cable, This TRS to XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring.

This Male XLR to 1/4 cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

With Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.

Tisino 1/8” Stereo to Dual 1/4“ Mono Cable, this cable is designed to connecting your smartphone, portable media player, laptop/PC or similar device with a 3.5mm mini jack output to a device with 2 x 6.35 mm jack inputs such as speakers, mixing console and so on.

This cable can be used to split a 3.5mm unbalanced stereo signal into two 1/4" TS(left/right) unbalanced mono signals, or to combine two 1/4" mono signals(left/right) into a single 3.5mm stereo signal. It splits closer to the 1/4 TS ends, the distance to the split point is about 19.8 inches(50 cm).

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers.

Tisino Balanced 1/4 to XLR Male Cable, This TRS to XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring.

This Male XLR to 1/4 cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

With Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.

Tisino Balanced 1/4 to XLR Male Cable, This TRS to XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. XLR pin 1 is connected to the 1/4" plug sleeve, XLR pin 2 is connected to the 1/4" plug tip, XLR pin 3 is connected to the 1/4" plug ring.

This Male XLR to 1/4 cable uses shielded 20 AWG 4N oxygen-free copper ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

With Heavy Duty 24K Gold-plated XLR and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.

1/4 Inch TS Mono to XLR Male Microphone Cable, Connect your studio or live sound gear with this handy 1/4 inch to XLR Adapter Cable, it is designed to connect gear with unbalanced phone outputs to gear with XLR inputs.

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover, It's especially great for studio or live performances.

With Heavy Duty 24K gold-plated XLR and 6.35mm connectors,it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.

High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.

Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.

2-Pack 6.35mm (1/4 inch) Male to 3.5mm (1/8 inch) Female Stereo Audio Headphone Adapter.

Perfect for a 6.35 stereo port to accept a standard stereo cable with 3.5mm plug (This adapter does not support 4-Pole TRRS Connectors).

High quality copper with gold plated can resists corrosion , reduce tarnish and ensures minimal signal loss.

XLR Female to 1/4 TS Mono Jack Microphone Cable, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices: Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.

High strength aluminum alloy die-cast housing, Gold plated connections, Oxygen-free copper core to deliver pristine sound.

The XLR connector is a high quality metal shielded type with positive locking into the microphone; The 6.35mm or 1/4 inch jack plug is a high quality metal type with shielding and anti stress spring.

This RCA to 1/4 cable is designed to connect a channel insert on a mixing console to an effects processor with phone jacks; Connecting any devices with 6.35mm (1/4’’) audio ports to AV Receiver, speaker, amplifier and other RCA-enabled devices;it can be used as a stereo "splitter", or as a "insert" cable to add an outboard mono effects device (with unbalanced RCA input and output jacks) to an effects loop.

This quarter inch to rca cable can be flipped around, 2 RCA or 6.35mm could all be the audio input, RCA to Stereo or Stereo to RCA;It splits closer to the rca ends, the distance to the split point is 20 inchs/50cm, the red connector is right and blue connector is left.(Note:if you're input is red and white then use the blue in place of the white)

High quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.

Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This mono to stereo adapter cable is designed to split a mono signal from a 1/4" output into both channels (left and right channel) of a 3.5mm input, It could be used to connect a mixing console, guitar amp, bass, mono radio to a portable media player, cell phone, laptop, recording device, or similar device.

This 1/4 mono to 3.5mm stereo cable only used as a mono (output) to stereo (input) connect, if it used as a stereo (output) to mono (input), this could burnout the stereo output stage of the device. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter.

Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.

High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.

Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.

These 1/8 to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

Unbalanced 3.5mm to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This Balanced XLR Cable is designed to convert a balanced XLR output to a balanced 1/4" TRS input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.

High strength aluminum alloy die-cast housing, Gold plated connections, 20 AWG Oxygen-free copper core to deliver pristine sound.

Constructed with multi-layers of shielding minimize signal interference and ensure the transmission stable,provides maximum cancellation of hum and noise.

This cable is designed to connect a channel insert on a mixing console to an effects processor with phone jacks; Connecting any devices with 6.35mm (1/4’’) audio ports to AV Receiver, speaker, amplifier and other RCA-enabled devices;it can be used as a stereo "splitter", or as a "insert" cable to add an outboard mono effects device (with unbalanced RCA input and output jacks) to an effects loop.

This cable can be flipped around, 2 RCA or 6.35mm could all be the audio input, RCA to Stereo or Stereo to RCA;It splits closer to the rca ends, the distance to the split point is 20 inchs/50cm, the red connector is right and blue connector is left.(Note:if you're input is red and white then use the blue in place of the white)

High quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.

This mono to stereo adapter cable is designed to split a mono signal from a 1/4" output into both channels (left and right channel) of a 3.5mm input, It could be used to connect a mixing console, guitar amp, bass, mono radio to a portable media player, cell phone, laptop, recording device, or similar device.

This 1/4 mono to 3.5mm stereo cable only used as a mono (output) to stereo (input) connect, if it used as a stereo (output) to mono (input), this could burnout the stereo output stage of the device. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter.

Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.

TISINO XLR Y-Splitter Cable, 2 XLR Female to 1 XLR Male, This cable is designed to connect two XLR outputs to one XLR input, Ideal for mixer, amplifier, equalizer, limiter, crossover, digital decoders, and more for stage speaker, KTV, home theater, etc.

Balanced XLR Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1. A balanced connection will help reduce interference and produce a much stronger un-distorted signal.

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. great choice for music lovers, It's especially great for studio or live performances.

XLR Female to 1/4" TS Mono Jack Microphone Cable, Use to connect a high quality microphone to a mixer or guitar amplifier, Available devices: Microphones, Audio Sound Consoles, Power Amplifier, Stereo System, Wireless Microphone Receiver ,etc.

High strength aluminum alloy die-cast housing, Gold plated connections, Oxygen-free copper core to deliver pristine sound.

The XLR connector is a high quality metal shielded type with positive locking into the microphone; The 6.35mm or 1/4 inch jack plug is a high quality metal type with shielding and anti stress spring.(Note:This is 1/4 inch plug,can not fit for phone and couputer)

These 1/8 to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

Tisino 1/4 to 1/8 adapter cable is designed to connect amplifier, guitar, mixing console, piano, home stereo system, karaoke system with standard 6.35mm plugs to audio devices with a 3.5mm stereo jack.

Plug and Play: This 3.5mm to 1/4 adapter cable has a 1/8 inch female stereo TRS socket end and a 1/4 inch male stereo TRS Plug，converting 3.5mm to 6.35mm jack，It can be enjoyed in parties, churches, schools, restaurants, stages, and KTVs

With Heavy Duty 24K gold-plated 3.5 mm and 6.35 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.

These 3.5mm to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

RCA to XLR Male Y Cable, This Cable is commonly plugged into a stereo RCA input/output to create an XLR male connection, it can be used in both directions. The XLR signal is simply split across the RCA connectors. Suitable for splitting or combining audio signals, is ideal for solving a number of audio problems.it can be used to improve connectivity between equipment such as amps, mixers, and microphones.

Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR Pins 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter.

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

1/4 inch Headphone Extension Cable, it's designed to extend the reach of hard-wired headphones with a stereo phone plug, for connecting guitar, headphones with standard 6.35 mm plug to audio devices with a 6.35 mm stereo jack

Heavy Duty Gold-Plated Metal 6.35mm connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers; Connect a smartphone with a headphone jack to XLR input; Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in)

This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram)

XLR male connector has molded strain relief to support the weight of the cable; 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports.

This xlr to 3.5mm cable is designed to connect two microphones (left channel Right channel) with XLR outputs to a mini stereo phone input. It is ideal for connecting pro mics to digital cameras, video cameras, tape recorders, and other professional audio equipment with 1/8" mini-stereo jacks.

The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 20 inches/50cm. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections.

XLR Connector with internal strain relief for rugged reliability, Oxygen-Free Copper (OFC) conductor for enhanced signal clarity

High Quality Metal 3 pin XLR Male to 6.35mm 1/4 Inch TRS Male Adaptor.

This adaptor is designed to adapt an XLR3F to a balanced 6.35mm output.

Connection A: 3-Pin XLR Male Plug; Connection B: 6.35mm (1/4 Inch) TRS Stereo Male Adaptor.

XLR Female to Dual RCA/Phono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the RCA inputs on a separate device, it splits a mono XLR signal into two separate mono RCA lines. (Note: Not left and right channels)

Unbalanced Connection - XLR PIN 2 is connected to the center RCA pin, XLR PINs 1 & 3 are connected to the ring of the RCA plug (earthed). This adapter is only available in an unbalanced format, it is not possible to make a balanced RCA to XLR adapter. This is an adapter to let you use an XLR mic/ component on your RCA circuit.

High-quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion-resistant, 20 AWG 4N oxygen-free copper wire combined with double shielding for best audio quality, excellent signal quality.

Balanced XLR Splitter Cable, 1 XLR Female to Dual XLR Male, This XLR Y-cable is designed to connect an XLR output to two XLR inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console. Compatible with equipment with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decoders, and stage lighting.

Balanced XLR Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1, a balanced connection will help reduce interference and produce a much stronger un-distorted signal. (NOTE: This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.)

20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers, It's especially great for studio or live performances.

High Quality Metal RCA Female to 3 PIN XLR Male Adaptor.

This adaptor is designed to adapt a phone plug to an XLR input, XLR pin 3 is grounded resulting in an unbalanced signal.

Connection A: 3-Pin XLR Male Plug ; Connection B: RCA Female Jack. XLR PIN-1 and 3 are tied together and carry the Ground via the Chassis, this connects to the Surround of the RCA.