Best Tkm Tools in 2026

✅ LEVEL UP YOUR GREASING EXPERIENSE: With our premium Grease Control Handle/Control valve you will take your greasing to the next level. Designed to work with high pressure grease pump this nozzle a usually used with air operated pumps with ratios as low as 14:1 all the way to the most common ratios like 40:1, 50:1, 60:1 and 70:1.

✅ GET THE JOB DONE FASTER: Continuous grease flow/dispensing when trigger fully pulled will allow you to dispense more grease faster and the flexible spout with help you to get the job done easier.

✅ HEAVY DUTY LAST LONGER: Made of steel, this handle was designed to last longer and always be there when you need it. With working pressure up to 7,500 PSI this control valve will handle most of your greasing tasks

💧 LEVEL UP YOUR DISPENSING EXPERIENCE: This light weight automatic DEF dispensing nozzle makes your dispensing jobs easier.

💧 GET THE JOB DONE FASTER: Up to 9 GPM (Gallons per minute) will help getting your tank full much faster.

💧 HEAVY DUTY LAST LONGER: Made of stainless steel and Acetal (heavy duty plastic), this handle was designed to last longer and always be there when you need it.

MIL-G-21164D for upper receiver threads, barrel nut installation and buffer tube installation

High quality lube good for any number of applications, exercise equipment, hinges, reels, ball bearings, bicycle gears, even telescope mounts

Aeroshell 64 / Aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance

LOCKS ON, DOES NOT LEAK: Grease goes in, not on the machine. LockNLube’s unique sliding sleeve ensures that when the jaws are locked onto the Zerk, a leak-proof seal is created.

ONLY REBUILDABLE COUPLER: All LockNLube couplers include a rebuild kit! Simply replace the seal and jaws and it is as good as new = lowest lifetime cost.

COMPATIBLE WITH ALL GREASE GUNS AND ZERK FITTINGS: 1/8" NPT works with all grease guns and manufacturers – pneumatic, manual, or electric. Locks on to all Metric and SAE specification Zerks.

ALL-WEATHER GUN LUBRICANT OIL - Gun Butter’s Pen Oiler not only makes your gun more durable, but it also lubricates your gun properly to ensure optimal performance every time you clean it! The all-weather lubricant will not burn up or evaporate in summer’s heat; it functions normally in freezing weather and salt air, stays intact during pouring rain, and repels dust and airborne sand in dry conditions which cause wear and failure. It also inhibits corrosion, preventing the formation of rust.

ENHANCED FOR EXTREME TEMPERATURES - The most advanced lubricant for heavy weaponry, as well as your pistol, handgun, rifle, shotgun or firearm of your choice, Gun Butter Oil is not grease, but a gun lube and cleaner that has enhanced lubricity for extreme temperatures and humidity; its oil will resist change and perform consistently below -20 degrees to over 400 degrees Fahrenheit. Gun Butter’s smoothness and consistency is unmatched due to its ease of function.

BREAK IN PROTECTION & CLINGABILITY - Ideal for armed forces, police, and top shooting professionals, this high-performing gun lubricant gives break-in protection and clingability (film strength) to maintain its placement. Gun Butter’s gun lubricant cleans, lubricates, and protects metal from rust, moisture, and dramatically reduces wear during all shooting conditions. Gun Butter provides the maintenance your gun needs so that you can use it for a longer period of time.

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

DEWALT 20V grease gun kit can control grease flow with the variable speed trigger

Industry leading 10,000 PSI max operating pressure

48" flexible hose offers greater access to difficult to reach fittings

Air bleeder valve for quick priming

DEWALT grease gun can power through clogged grease fittings with a motor that delivers up to 10,000 max PSI

High-volume pump of the battery grease gun pushes up to 5.0 oz/min high-flow applications.

The battery operated grease gun can control grease flow with the variable speed trigger

USED BY U.S. SPECIAL FORCES WORLDWIDE: TW25B is uniquely engineered, made in America and is used by U.S. Special Forces.

SUPER LUBRICATION and PROTECTION: Preferred lubricant on heavy weaponry, AR's, all firearms, shotguns and handguns while protecting wear parts and bore.

OPTIMIZED FOR PERFORMANCE and REDUCED MAINTENANCE: Ensures firing reliability in extreme temperature conditions ( -90°F (-67°C) to +450°F (232°C) and is the most durable extreme performance lubricant available.

Fully automatic with continuous operation and grease flow.Fit Type: Universal Fit

Variable-speed trigger provides excellent grease flow control

30 inch high-pressure hose with coupler and attachment clip

Extra reach for hard to reach grease fittings

Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces

Works best with the LockNLube Grease Coupler

Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on.

Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure.

Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler.

The 5803 easily screws directly onto any hand-held grease gun.

Overall length is 2.76 Inches.

Standard 1/8 In. NPT (f) screw-on style thread connects to both rigid extensions as well as flexible hoses with a 1/8 Inch NPT (m) connection.

The product is easy to use

The product is durable

The product is manufactured in China

Develop over 10,000 PSI without batteries

Patented pressure return valve easily clears pressure from the hose and returns it to the canister with no mess.

Includes the LockNLube Grease Coupler, 10 ft. hose, and the G.Scoop to easily and cleanly refill with bulk grease

Anti-Mess Grease Pump: Single-hand held grease gun with zinc-plated steel barrel provides a more clean and efficient way of greasing

Kit Includes: A one-hand pistol grip grease gun, 500mm high-pressure nylon hose, 10 AirTec G200 multipurpose grease tubes, and 4-jaw hydraulic coupler

High Pressure Capability: Grease gun pistol ensures function under pressures as high as 300 bar (4,350 PSI) and multiple braid burst pressure of 1,000 bar (14,450 PSI)

Aeroshell 33 MS grease in a hard to find size.

Mil-Spec grease in easy to use quarter ounce container for use with guns and other smaller applications.

MIL-G-21164D - Approved AR Grease / AR Grease / Gun Grease

M18 48" Grease Gun Hose W/Coupler

The product is easy to use and easy to handle

The product is highly durable

1 Year warranty on material and workmanship

This product meets customer requirement

Product is manufactured in Mexico

10,000 PSI and 7.5 oz./minute flow rate for maximum efficiency

Steel grease tube for maximum durability

On-board LED work light helps to illuminate workspace

Mini grease gun with needle nozzle

Easily lubricates air tools and other flush type mini grease type fittings

Pack bottom side with grease, then re-install base cap and push up against the inside plate with a screwdriver or other tool to feed grease up to nozzle and pressurize

LockNLube Grease Coupler Locks on, stays on. Doesn't leak.

Loop & Lock storage feature keep you clean.

20" Heavy Duty Hose and in-line hose swivel.

Variable Speed Trigger allows for increased control over the flow of your adhesive

Variable Speed Dial allow for setting maximum and minimum flow rates

Anti - Drip Feature automatically retracts the plunging rod preventing excess adhesive from dripping out

Built for heavy-duty service.Fit Type: Universal Fit

Suitable for Use on most Hand, Battery Powered or Air Operated Grease Guns & Bulk Grease Pumps

Ergonomic Thumb Lever Design makes Coupling and Uncoupling totally Effortless

Passivated finish for maximum protection from corrosion

Heavier wall thickness for extra strength

Stress relieved and tempered carbon steel spring

For use with most hand-operated grease guns

For lubricating very tight places-sealed bearings

Knurled grip to help connect/disconnect from coupler

Rip-stop case can be rolled and secured with attached strap to keep tools clean and portable

Grommets allow hanging for easy access to the tools

All tools include a Zerk fitting in the back for easy connection and release from LockNLube or traditional, grease coupler

dcf894: optimized application versatility with 3-speed settings

dcf894: up to 330 ft-lbs max of fastening torque and 600 ft-lbs of break away torque at only 3.48lbs

dcf894: compact and lightweight design for comfort when working in tight spaces

Replacement double lip grease seal

Fits 1,250 to 8,000 lbs. capacity trailer axles

Available in packages of 2 or 10