Best Tomopal in 2026

Luer Slip can be connected to ¼” ID tubing

Used with the 30 ml Glass Syringes for DGA testing kit

Used with the 50 ml Glass Syringes for DGA testing kit.

Disposable - the syringes are disposable, for one time use only

Sterilized - each syringe is individually sealed

Syringe Only - These syringes are with a luer lock tip, it does not have a needle

64 FITTINGS---This 64-piece ORFS hydraulic cap and plug kit by Zelcan gives you plenty of fittings in the 6 most commonly needed sizes: ORFS 4, 6, 8, 10, 12, and 16.

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These ORFS caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.

2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps

Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve

The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241

Material: the syringe tip caps are made of plastic in black and which can be reusable

Size: high: 1.8 cm, thread diameter: 0.76 cm, the inner size of connector is 0.5 cm

Feature: the tip cap is suitable for various specifications syringes and is locking in to the tip of syringe

【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers.

【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion.

【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system.

【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers.

【100 FTHYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 1/4 inch, and the outer diameter 0.59 inch. With a 5800 PSI working pressure, the hydraulic line is explosion-proof.

【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion.

64 FITTINGS---This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments

EASY TO USE---These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly

【Adjustable Resistance】Rotating the knob to easily adjust the resistance, rang 22-440 lbs free adjustment. Just rotating the knob, resistance can be adjusted, faster than car shifting.

【Durable Material】Double-layer steel tube is firm and durable. The material is strong and more realistic. The training machine has 440 lbs bearing capacity.

【Stable Triangle Structure】Stable triangle center design makes the exercise more stable, which is a safer and more scientific structure.

This Universal Quick Disconnect Coupler & Plug set features a new improved design for high flow performance and maximum service life.

1/2" NPT Thread, 1/2" Body (see size chart), These flat face couplers connect to models of skid steers loaders including Bobcat, Case / New Holland, Kubota, and many others

Heavy Duty Design with 5076 PSI Rating and 23 GPM Max Flow Rate

Quality material: made of good quality plastic, come with connector, clean and durable, waterproof and reusable, every one is individually packed in a sealed bag

Range of application: each syringe is individually sealed, clean, safe and sterile, and can be applied for hobby crafts, home, experimental or industrial use

Fits for: these measurement syringes are great for industrial laboratory, liquid dispensing, refilling, measuring, supplements and pesticides

Length: 72"

4,000 PSI

Inside diameter: 3/8"

3/8in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

This kit will fit most major brands of electric and pneumatic wrenches with ½” square drive

IR, Snap-On, Chicago Pneumatic, Florida Pneumatics, Air Cat..

Replaces your worn out retainer ring and O-Ring

The 3/8" hydraulic quick couplers with 3/8" NPT thread+ 3/8” body,with 2 dust caps.

The 3/8" 10000 psi hydraulic coupler interchange with models of Enerpac C-604 Parker 3000 Series Perfecting T Series Snap Tate 76 Series Stucchi IVHP Series Dip PVM Series Safeway S30 Series

Designed for high pressure applications:hydraulic rams, hydraulic jacks,hydraulic pumps and cylinder

【Individually Wrapped】 Every syringe is individually sealed, clean, Great for refilling and measuring essential oil, science lab, industrial, applications of inks, perfume, lubricants, sealants, hobby crafts, etc

【Widely Application】These syringes are suit measuring and dispensing fluids, suit for lab use and experiments, sample preparation, and can be used with syringe filters and sample vials, garden watering and essential oil separator, supplements, Great for measuring nutrients for your garden plants, etc

【Easy to Observe】 The corresponding calibration is engraved on the syringe tube to facilitate users to view or measure the residual amount of the solution

1/2in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

ISO16028 Standard, New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance

Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when the coupling is dragged along the ground

Durable ball-locking mechanism assures reliable connections every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life.

10 sets of 3/8" Impact Wrench Socket Retainer rings with O-ring

3/8''square drive electric wrench and pneumatic wrench are suitable for this kit to fix the impact sleeve

Compatible with any 3/8" Standard Impact Wrench

1/2in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

Rated to 5000 psi for high-pressure hydraulic applications

Solid steel fittings for durability

Black, Nitrile tube for flexibility and oil resistance

▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable.

▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

Rated to 5000 psi for high-pressure hydraulic applications

Solid steel fittings for durability

Black, Nitrile tube for flexibility and oil resistance

299 PSI max. working pressure

Temperature Range: -20 to -160F

Non-conductive, closely plied high tensile textile cord reinforcement with neoprene cover

Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications.

Maximum Operating Temperature: 212 deg. F

Maximum PSI Rating: 5000 psi

Includes: 10pcs 3-way stopcocks with luer connections.

The stopcocks have polycarbonate body and HDPE stem.

Sterile and Individual Package.The production date and expiry date have been marked on the back of the package（The current product is the latest production in 2023）.

Quantity: 1000pcs Black color luer lock tip caps

Size: height: 1.8cm(0.7inch), thread diameter: 0.76cm(0.3inch)

Feature: Ideal for glues, paints, adhesives, conformal coatings, thermal heat sink compound, and solder paste in syringes for later use

[Low Profile & Portable] - This mini hydraulic cylinder is ultra-thin, portable, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces.

[Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

[Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2); the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP).

1/2" 304 Stainless Steel Full Port Ball Valve

1000 WOG Pressure Rated

Full 304 Stainless Steel Construction

One end:skid steer style quick coupler attachment (1/2” Body) interchanges with ISO 16028 flat face couplers

The other end: poppet valve Pioneer style coupler interchanges with all ISO 5675 couplers

Applications:The flat face hydraulic quick connect coupler can easy fix for switching between flat face couplers and pioneer hoses coupler,interchange equipment from a skid steer to farm tractor.