Best Tqing in 2026

[Safety design]-Low starting wind speed, high wind energy utilization,The blade material is synthetically injection molded with high-strength FRP material. At the same time, the fashionable spiral blade is also designed with aerodynamics to make the rotor run smoothly, reliably and quietly

[Available 360 Degree Wind]-Designed with three-phase AC PMG, it boasts low torque, high-power tracking intelligent microprocessor that can effectively regulating the current and voltage. It obviously increases wind energy utilization and annual power generation

[Super quiet]-With dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it has the lowest starting wind speed and a larger windward area, enabling it to generate electricity at lower wind speeds

Designed for outdoor use and is moisture, high/low temperature, UV and corrosion resistant, waterproof/IP67.

The cable is made of heavy duty 10AWG(6mm²) wire. Very thick and durable.

Cable length:1.8m/6ft, both solar cables are terminated with solar panel Connectors.

Two cables with hard plastic Female & Male connecters at one end and bare on the other end.

Black wire sunlight resistant cable,extends and locks built-in cables.

UV resistant and waterproof,TUV tested cable.

【WATERPROOF DESIGN】Solar Double Cable Entry Gland adopts a white color scheme that matches more with motorhomes. And it is a drop-shaped design and PG11 waterproof connector as to repel water， suitable for all cable types from 14AWG to 10AWG.It's an ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on RVs, garages,sheds and so on.This product is applying for the design patent, please identify our unique design.

【KEEPING THE INNER NUTS FROM TURNING】Many guests reported that the inner nuts are too much spacing to cause cable gland's slippage,but BougeRV completely solved this problem.We added a set of hexagon nuts to minimize the spacing and no longer slip, which will greatly improve your work efficiency.

【EASY INSTALLATION】Simply pass your cable through the gland and tighten the cap.Can be fixed with Glue, decor sealant (NOT INCLUDED) or stainless steel self-tapping screws (INCLUDED) depending on position and sealing requirements, etc

Pair of UL Listed solar cable. Both solar cables are terminated with Solar Connectors.

SEE IMAGE #2 in the photo gallery for 10 AWG and 12 AWG solar cable specifications

Photovoltaic module interconnection cable for use with or without a raceway in accordance with the Wiring Systems, Article 690 in the National Electric Code (NEC), NFPA 70.

【Y Branch Parallel Connector】1 male to 2 female (M/FF) and 1 female to 2 male (F/MM) solar connectors, which can connect 2 solar panels in parallel.

【Main Technical Specification】Rated Current: 20A, Rated Voltage: DC1000V.

【Wide Application】The solar y connector is compatible with various solar cables:14-10AWG (1.5mm² - 6mm²).

Cable entry for all cable types 2mm² to 6mm²

Surface-mounting with adjustable grommet & blanking plug

Easy to install with glue, Drill-free mounting

Renogy mounting Z brackets are very easy to use, unique designed, and perfect for irregular surfaces

All parts you need to mount your panels to roof/wall are included in this product.

They are composed of aluminum material and are light weight.

PG7 Waterproof cable gland used for all cable types 2mm² to 6mm² in Dia ,Widely used for solar project when routing the cables

Suitable for most round cables for Solar Panel,DC power, Aerial, satellite, Air conditioning, Lighting etc

Can be fixed with Glue (not included) Sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws (not included) depending on position and sealing requirements etc

Pair of UL Listed solar cable. Both solar cables are terminated with Solar Connectors.

SEE IMAGE #2 in the photo gallery for 10 AWG and 12 AWG solar cable specifications

Photovoltaic module interconnection cable for use with or without a raceway in accordance with the Wiring Systems, Article 690 in the National Electric Code (NEC), NFPA 70.

【WATERPROOF DESIGN】Solar Double Cable Entry Gland is a drop-shaped design and PG11 waterproof connector as to repel water， suitable for all cable types from 14AWG to 10AWG（2mm² to 6mm² ）.It's an ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on RVs, garages,sheds and so on.This product is applying for the design patent, please identify our unique design.

【KEEPING THE INNER NUTS FROM TURNING】Many guests reported that the inner nuts are too much spacing to cause cable gland's slippage,but BougeRV completely solved this problem.We added a set of hexagon nuts to minimize the spacing and no longer slip, which will greatly improve your work efficiency.

【EASY INSTALLATION】Simply pass your cable through the gland and tighten the cap.Can be fixed with Glue, decor sealant (NOT INCLUDED) or stainless steel self-tapping screws (INCLUDED) depending on position and sealing requirements, etc

UPGRADE 2.0 SOLAR CABLE: Increase a free pair of separate solar connectors. One pair ( 1 piece black + 1 piece red ) 16.5 Feet 12AWG Solar Extension Cable. Made with copper.

Extends and locks built-in cables.

Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.

【One Pair of Solar Y Branch Parallel Connectors】It can connect four solar panels in parallel, with 1 male to 4 female(M/FFFF) and 1 female to 4 male(F/MMMM).

【Easy Install】There is a built - in lock in each male connector, you just need to press your fingers to the two sides of the built-in lock on the male connector, then you can connect or disconnect the connector easily, without using other tool. The connection will work stably with this built-in lock.

【Compatible】This connector is suitable for most conventional type solar connectors except the amphenol connector and other irregular type connector, which is also compatible with solar cable in 10AWG to 14AWG.

SOLAR Y BRANCH CONNECTORS - 1 male to 2 female(M/FF) and 1 female to 2 male(F/MM), it is compatible with solar cables or connectors in 14AWG to 10AWG, it could be used for paralleling solar panels.

WATERPROOF AND DURABLE - An IP67 waterproof ring on the male connector is perfect to seal out water and dust to prevent corrosion. The connector is stable and safe with the built-in lock which is durable in outdoors environment.

HIGH SECURITY - The connector is certified by TÜV, made with PPO material, the contact is made with Copper, silver plated. Good material makes sure that it can keep working stably in the temperature range from -40℉ to 190℉.

MADE IN THE USA - Bare copper conductor, Cross linked Polyethylene (XLPE) Insulation

RoHS Compliant, UL 4703, 44, 854 rated - Temperature rating: -40°C Min, 90°C Max. 600 V 10 AWG

UV and Sunlight Resistant. Direct Burial rated Applications include: Solar Panels, DC circuits, inverter wiring.

SAE to SAE Cable, the sae extension cable works great to connect solar panel to battery, extend the battery maintainer, it's suitable for solar battery connection and transfer, and automotive batteries transfer etc. Work great for Battery Minder charger Minn Kota motors boat & motorcycle batteries. A handy extension for solar charger to atv application, also can trickle charge during cold weather.

The sae cable is made of 14AWG pure copper wire; Cable length:1m/3.3ft. thick, flexible and durable. The cable is a good size to work with for an automotive solar charger installation. Choose the right size(iGreely provides wires from 18 to 10 awg, length from 2ft to 30ft, just visit our store to search for more accessories) to fit for your need, you can place the solar panels in an area where they have access to full sunlight, let the RV solar panel sit in full sun most of the day.

Come with waterproof dust cap for protecting standard SAE type connector from rain and dust when closed, which stay clean and dry inside when you don't use.

SOLAR Y BRANCH CONNECTORS - 1 male to 2 female(M/FF) and 1 female to 2 male(F/MM), it is compatible with solar cables or connectors in 14AWG to 10AWG, it could be used for paralleling solar panels.

WATERPROOF AND DURABLE - An IP67 waterproof ring on the male connector is perfect to seal out water and dust to prevent corrosion. The connector is stable and safe with the built-in lock which is durable in outdoors environment.

HIGH SECURITY - The connector is certified by TÜV, made with PPO material, the contact is made with Copper, silver plated. Good material makes sure that it can keep working stably in the temperature range from -40℉ to 190℉.

One pair 10 Feet 10AWG Solar Extension Cable ( 1 piece Black + 1 piece Red ). Made with copper, low resistance. Both solar cables are terminated with cable Connectors.

The insulation layer of the solar cable is made of excellent PPO, which has the characterictics of good flame retardancy, self-extinguishing, high strength, abrasion resistance and corrosion resistance.

solar cable is designed for outdoor use and is moisture, UV and corrosion resistant. The wiring is weatherproof and designed to withstand extreme heat and cold.

Lightweight, Composed of aluminum material

Pre-assembled with bolts and washers

Easy to use, Unique Design, Perfect for irregular surfaces

SOLAR PANEL MOUNTING Z BRACKETS are suitable for installing 50W to 600W solar panels.

UNIQUE DESIGN : Bent design with a certain height, is easy to use and very suitable for irregular surfaces.Such as installed on rooftops,RVs, trailers, ships, recreational vehicles or yachts.

WIDE APPLICATIONS RANGE : The mounting hole reaches 0.95in, which can meet various specifications of solar panels on the market.

6 pairs solar panel connectors Male & Female + 6 pairs solar connector pins (male & female) + 1 pair of spanners

Conductor pin is tinned Copper£º It makes a rock solid connection after you crimp the pin to the wire, and these are operated perfectly under heavy load

WATERPROOF RING on connection is perfect to seal out water and dust to prevent corrosion, PPO INSULATION MATERIAL with excellent aging resistance and UV endurance, survived rain, high force winds and snow for more than 20 years!

Solar Panel Connector Cable：Solar Panel Connectors To Sae Cable. This Cable Is Made Of Heavy Duty 10Awg Copper Wire,10Awg Has a Larger Diameter Cable, Can Reduce Power Loss Compared With 12Awg/14Awg, Etc. Rated Current: 50Amps, Cable Length: 60cm/23.6inch.

Widely Application & Compatibility: The Solar Connector Cable Fits Most Solar Panel, You Can Recharge Portable Generator with Your Solar Panel by This Cable. Quick Connect&Disconnect,Easily Connect to Rv Solar Panels, Simple Plug Easy to Connect to Device or Removal Without Any Extra Instruments. It Is Widely Used in Automobiles, Motorcycles, And Outdoor Solar Installations.

Free Sae Polarity Reverse Adapter: Sae to Sae Connector, Used for Reverse The Polarity for Sae Cable. Different Brand Solar Panel May Have Different Polarity, Please Check the Polarity Before Connecting.

Please read the size carefully.PG13.5 Waterproof cable gland used for all cable types 6mm² to 12mm² in Dia ,Widely used for project when routing the cables

Suitable for most round cables for Solar Panel,DC power, Aerial, satellite, Air conditioning, Lighting etc

Can be fixed with Glue (not included) , dicor sealant, alike or stainless steel self-tapping screws (not included) depending on position and sealing requirements etc

The iGreely 10 gauge wire can be used for solar panels, DC circuits, Boat, Marine, Automotive, RV and inverter wiring.

Tinned copper wire, 10 AWG (6mm²) wire, 30Ft Black & 30Ft Red, 84 strands 0.285 mm tinned copper wire, protecting them from corrosion, and easy to solder.

PV Wire - PV Jacket insulation is thick and sturdy, coated well, durable and very flexible, UV Resistant.

VALUE FOR MONEY: With 22 pairs of solar panel connectors£¨Male & Female£and 22 pairs of solar connector pins (Male & Female). In addition, we will present a pair of spanners to you in order to easy your installation.

CONDUCTOR PIN IS TINNED COPPER: It makes a rock-solid connection after crimping the pin into the wire and tighten the connectors, also, these solar connectors can keep operating perfectly under heavy load.

WIDE APPLICATIONS RANGE: Compatible with PV cables (Solar Cable) with different insulation diameters (13AWG to 10 AWG), which is suitable for solar cables in various specifications on the market.

🔩【Wide-Application】 The XOOL Mounting Z-Brackets Kit makes it easy to mount solar panels to recreational vehicles (RV's), boats, motorhome, cabins or anywhere else where you need a simple yet reliable method to mount solar panels. This kit is suitable for mounting solar panels up to 150 Watts. All parts you need to mount your panels to roof/wall are included in this product. It’s unique designed is perfect for irregular surfaces.

🔩【High Quality】 The XOOL Mounting Z-Brackets are composed of high quality aluminum material. Therefore they are very light weight and convenient. Our package adds bolts and nuts that are made of stainless steel, which would secure your solar panel down and meet the maximum of requirement. The brackets are aluminum with a nice finished edge (not sharp) and the aluminum will not rust.

🔩【Easy to install】 The XOOL Mounting Z-Brackets has a good design and makes mounting easy. It is ideal for mounting small solar panels. They seemed a little thin, but after installing was surprised at the strength of this little aluminum brackets. They are very strong works great to hang solar panels up and not have to worry about them. You can use less time to achieve better effect, which greatly improve your work efficiency.

Lightweight, Composed of aluminum material

Pre-assembled with bolts and washers

Easy to use, Unique Design, Perfect for irregular surfaces

HEAVY DUTY - 10 AWG insulated solar panel cable wire.

COPPER STRAND - 84 strands of copper wire, tin coated to prevent oxidation.

LESS MESS - 2x10 AWG Twin Wires allows for less cable management concerns.

【 SAE Quick Connector】: Fits for most of sae socket ports, creating a weatherproof solar panel flush mount connector for your SAE power point.

【 Dustproof and Waterproof Cap 】: Sae cable connector comes with weatherproof cover to keep the inside of the SAE connector clean and dry when not in use.

【 SAE Male Plug to SAE Female Socket Cable 】12 AWG SAE Extension Cables is made of heavy duty 12AWG tinned copper wire with high conductivity efficiency and UL listed. Length:13.2 inch / 33.5 cm.

【SOLAR CABLE CRIMPER】 High carbon steel CRIMPER w/ accurate ratchet mechanism, comfortable & non-slip PP+TPR HANDLE and auto lock & release DEVICE for crimping 2.5/4/6 m㎡ wire easily & precisely.

【CROSS & STRAIGHT SPANNER】Multi-purpose CROSS one is suitable for 18/19/21mm end size of connector, and the STRAIGHT one fits for 19mm end size, they provide you easy terminals wires' installation & assembly.

【6 PCS CONNECTORS】Fits for 1.5-6 m㎡ cable (AWG14, AWG13,AWG12, AWG11, AWG10). Maximum voltage : 1000V. With water & dust proof is safe for electrical connection. Easy to connect & disconnect with stable self-locking mechanism.