Best Tramex in 2026

Meter is supplied with 9V battery, instructions and zipper carrying pouch

To use, simply switch on and hold the instrument firmly against the surface

Gives an instant reading of moisture content up to 6% concret

New, rugged ergonomically designed enclosure.

Dual-Depth penetration allows for comparative of surface and core moisture and elimination of substrate influence on the testing of coverings.

Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.

New, rugged ergonomically designed enclosure.

Non-destructive in operation with no need to probe, drill or mechanically damage the surface.

Instant and precise readings to a depth of approximately 20mm (3⁄4") into the slab.

Measures up to 6.9% moisture content in concrete and non-destructive CM Carbide Method moisture content equivalent readings.

Large clear backlit digital display and hold function “freezes” meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.

7% to 24.9% Moisture Content measurement in Wood, 7 -100 WME, using Pin-type probe attachments. (optional)

New, rugged ergonomically designed enclosure.

Non-destructive in operation with no need to probe, drill or mechanically damage the surface.

CMEX5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline.

Extension Handle for Tramex 5 Series

ME5

CME5

Measuring Range: Four ranges of sensitivity up to a maximum depth of 4 (10 cm)

Display: Analog

Size: 6" x 3.5" x 1.5"

Complies to ASTM D7954 and non-destructive impedance moisture meter and dependable solid state circuitry and rugged molded body for long-term reliability.

Three ranges of sensitivity enabling the inspection of a variety of roof membranes and insulation thicknesses and battery powered - 9 Volt PP3.

Ergonomic easy-reach and easy to operate control panel and leak tracing, water leak detection, problem sourcing, and an instantaneous and clear indication of roof condition.

Water Damage Restoration Kit This listing is for each

Manufacturer: Tramex

Provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring, walls etc. as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & F2420

Manufacturer: Tramex

Provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring, walls etc. as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & F2420

Concrete Moisture Encounter X5 - CMEX5.

1 x Hygro-i2 Relative Humidity probe, Heavy-duty Pin-type Wood Probe, Hole liners.

Infrared Thermometer, Extension Handle.

<b>Price For:</b> Each <b>Manufacturers Warranty Length</b>: 1 yr. <b>For Use With</b>: Moisture Encounter Plus <b>Item</b>: Calibration Check Moisture Encounter <b>Country of Origin (subject to change)</b>: Ireland

Manufacturer: Tramex

Tramex Hygro-i Electronic Interface to connect to CMEX2 & MRH3 non-destructive moisture meters

CMEX2 Non-destructive, digital concrete moisture mete

MEP Non-destructive analog moisture meter for general building materials

3 Hygro-i RH probes and connector cable with ASTM F2170 tools

Concrete Moisture Encounter X5 - CMEX5

Infrared Thermometer

EZ Kit Carrying Case

New, rugged ergonomically designed enclosure.

Non-destructive in operation with no need to probe, drill or mechanically damage the surface.

Dual-Depth penetration allows for comparative of surface and core moisture to help establish the depth of any moisture within GRP composites

Manufacturer: Tramex

Provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring, walls etc. as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & F2420

Moisture testing of wood, drywall, masonry, roofing and other construction materials

Digital, non destructive meter

"Hold Function" enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible

Bluetooth BLE enabled for use with mobile devices and up to 100,000 data point entries possible.

Instant set up and start modes and used to perform BS 8201, 8203, 5325 and ASTM F2170.

Ambient and In-situ RH and temperature logging Intuitive and instructive APP interface.

Concrete Moisture Encounter 5 - CME5

Infrared Thermometer and Dew Point Detector

EZ Kit Carrying Case

Hammer-action Pin-type Electrode

For Wood And Wood By-products

Concrete Moisture Encounter X5 - CMEX5

Concrete Moisture Determinator Probe

1 x Hygro-i2 Reusable Relative Humidity probe

Concrete Moisture Encounter X5 - CMEX5

Concrete Moisture Probe - Determinator

Free App available for Android and iOS (phone not included)

Concrete Moisture Encounter X5 - CMEX5.

Infrared Thermometer.

Extension Handle.

Calibration Check Plate

Extension handle

Handy holster pouch

Heavy-duty Pin-type Wood Probe

Cable and Pins for use with CMEX5

Bayonet connector