Best Turbo in 2026

9 x 33 Inch Fit Most Sizes of Skateboard, Cruiser or Scooter

Industry Standard 80 Grit Griptape

Easy Application on Any Skateboards

9 x 33 Inch Fit Most Sizes of Skateboard, Cruiser or Scooter

Industry Standard 80 Grit Griptape

Easy Application on Any Skateboards

Get A Grip With Turbo Grip Strips; Grip Strips Can Be Inserted Into Thumb And Finger Holes To Help Adjust Fit Due To Shrinking And Swelling;

Grips Strips Have A Unique Textured Surface To Enhance Grip; Easily Inserted Into Thumb And Finger Holes,

Grip Strips Can Be Layered If Needed And Removed Without Leaving Adhesive Residue Behind;

Can be Inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; unique textured surface to enhance grip;

Can be layered if needed and removed without leaving adhesive residue behind;

30 pre-cut pieces per pack

Can be Inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; unique textured surface to enhance grip;

Can be layered if needed and removed without leaving adhesive residue behind;

30 pre-cut pieces per pack

Can be inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; Unique textured surface to enhance grip

Can be layered if needed and removed without leaving adhesive residue behind

30 Pre-Cut Pieces Per Pack

Can be inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; Unique textured surface to enhance grip

Can be layered if needed and removed without leaving adhesive residue behind

30 Pre-Cut Pieces Per Pack

Can be Inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; unique textured surface to enhance grip;

Can be layered if needed and removed without leaving adhesive residue behind;

30 pre-cut pieces per pack

Can be used in place of the "4" most commonly used Hard-Start kits

Microfarad Coverage: Up to 1 ton - 108 to 130 mfds , 1 to 2 tons - 189 to 227 mfds , 2.5 to 3 tons - 233 to 280 mfds or 3.5 to 5 tons - 270 to 324 mfd

High microfarad capacitor and potential relay are enclosed within a sealed aluminum housing protecting it from harsh environments

Can be inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; Unique textured surface to enhance grip

Can be layered if needed and removed without leaving adhesive residue behind

30 Pre-Cut Pieces Per Pack

Can be Inserted into thumb and finger holes to help adjust fit due to shrinking and swelling; unique textured surface to enhance grip;

Can be layered if needed and removed without leaving adhesive residue behind;

30 pre-cut pieces per pack

Get a grip with Turbo grip strips; grip strips can be Inserted into thumb and finger holes to help adjust fit due to shrinking and swelling;

Grips strips have a unique textured surface to enhance grip; easily Inserted into thumb and finger holes,

Grip strips can be layered if needed and removed without leaving adhesive residue behind;

[Multi-functional Tool]: A multi functional skateboard T tool that allows you to adjust axle nuts, mounting hardware, and the kingpin nut on the top of the truck; which is perfect for completing skateboard assembly

[All-in-One Design]: The all in one skate tool has everything you need to tighten up or repair your skateboard. This skate tool works with all types of the skateboards,penny board and long boards, it can help change wheels, clean your bearing

[Anti-Loss Structure]: The skateboard T tool includes 3 different sizes of sockets(3/8", 1/2", 9/16") and a slide-out Phillips head wrench screwdriver that fits into the top of the handle when not in use

Bones REDS are manufactured in China to our Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.

Single, non-contact, removable rubber shield for easy cleaning and less friction and High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

Single, non-contact, removable rubber shield for easy cleaning and less friction

High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

100% SATISFACTION GUARANTEED - We promise you will be stoked on this or your money back.

INCREDIBLE SPEED - Bones Reds are some of the best bearings in the world for a reason, they're awesome!

BEARING SIZE - Bones Bearings are bearing size 608, which measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).

HIGH QUALITY-Exclusive Silicon grit binding process for grip that will not wear out, thickness up to 1.5mm,Super sticky adhesive that won't peel in extreme heat or cold.

Griptape: Black Widow Premium Grade 80A Black Griptape. Best sticky adhesive and grip designed for Longboard and skateboard riders of all levels. Improves rider's grip which leads to better tricks and greater safety.

Size: 9" x 33". EASY TO CUT & FITS NEARLY ALL SKATEBOARDS AND SCOOTERS - Super sticky adhesive that won't peel in extreme heat or cold

Independent Genuine Parts Hardware w/Tool Blue Black Phillips 1" inch

The amazing new Dragon Formula (DF) Urethane used to create these wheels is another industry leading innovation from Powell Peralta. DF-93A Dragons will not only roll over rough terrain, but also grip and slide like 99A and 101A wheels do, so that you can do all your normal tricks and more on the greater range of skate terrains made skateable by its softer 93A hardness.

Speed: Dragons are very fast because DF-93A is super high rebound, an industry leading 18-20% higher than hard wheels. This higher rebound means you won’t loose speed in bowls or parks the way you would with an ordinary 93A wheel, and you will roll much smoother and faster on rough streets and sidewalks…even in places you use to have to walk your board

Grip & Slide: Dragons slide on both rough and smooth terrains, and also grip when you need it. This is because Dragon Formula is not just an ordinary mid-90’s wheel formula. It has been developed over a ten year period to optimize and fine tune it to perfection. No other wheel can do what these Dragons can.

GET TRICKS FASTER: With Skater Trainers, you will learn ollies, kickflips, and more in no time! Our Skate trainer accessories simply stretch over your wheels and stop them from rolling so you can focus on the steps of the trick without worrying about rolling or falling. You can practice more, FALL LESS, get your CONFIDENCE UP, and develop some MUSCLE MEMORY. Once you have it down, take the Skater Trainers off and do your newly learned tricks for real, rolling on the pavement in your element.

THE PERFECT GIFT: Easter basket stuffers for Teens Boys, Kids Ages 8-12, Tweens, Men, Adults, Girls, or Anyone. Impress your friends with new tricks. Be the next Tony Hawk Pro Skater or reclaim your previous glory faster and safer. As important as Helmets, knee pads, elbow pads, or wrist guards - Skater Trainers are skateboard accessories perfect for anyone's tool kit. Cruz with confidence. A gift to go with Skateboards for Kids ages 6-12 and Teenagers.

THEY REALLY WORK: Recommended by top Skate Instructors, PARENTS, and SKATERS just like you. Check out our awesome reviews! We have quickly become THE WORLDS TOP SKATEBOARD ACESSORIES for learning tricks. Many people are SKEPTICAL at first because this is new patented equipment, but once they get their order, they are excited to see fast progress. Skateboarding is all about confidence, which you can build with Skater Trainers. "Where was this when I was a kid" is something we almost always hear.

Mr. Pen grip tape 36.4 x 10.6 inches (110x27cm)

Made from durable quality silicone-carbide grit

Super adhesive bubble free application, will not peel in cold or heat

PACK - Skate T-Type Tools x 1 & Skateboard Hardware x 8

SCREW - Length: 25 mm / 1''

TOOL - Includes 3/8", 1/2", 9/16" sockets & Phillips Screwdriver

Long lasting Jessup Griptape, The Original skateboard griptape provides rock solid bonding to deck surface, effortless conformability, easy trimming without tearing, and superior durability for professional use.

Land all your tricks with confidence with this trusted griptape. Jessup Griptape, The Original griptape roll is made of silicon carbide grit with an aggressive adhesive designed specifically for the demands of the skateboard industry.

Tough on tricks, Easy on shoes.

PEEL AND STICK - Easy peel and stick application of this 9” X 33” sheet of grip for your skateboard. The tape is also easy to cut for custom applications.

EXCELLENT GRIP - The 80 grit silicon carbide surface will provide you with great traction for your deck. The enhanced grit helps provide support and gives your shoes a firm grip on the board.

HEAVY DUTY - This high quality grip is super strong, waterproof, and weatherproof

Includes 8 Phillips Bolts, 8 Nuts, and 1 small sticker

Tops of Phillips Bolts are white

Independent Genuine Parts Riser Set Black 1/8 Set

This Mob Grip Clear Griptape is 10" x 33" professional quality Mob Grip grip tape. Formulated with long-lasting glue to provide the best stick, this grip tape's fine-grit texture and smooth cutting makes it perfect for skateboards, cruisers, longboards, and more

One (1) sheet of Clear Premium Mob Grip Clear Griptape from Mob Grip

Formulated with long-lasting glue to provide the best grip

1 Set of 7/8” Black Bolts / Nuts

2 GP-S bearings

1 Set Assorted 7/8” Silver, Gold, Red Bolts / Nuts