Best Tutor Auto in 2026

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.

PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank.

RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability.

REPLACEMENT DISTRIBUTOR CAP & IGNITION ROTOR KIT - A distributor cap is a removable component that is used in spark ignition systems to cover both the distributor and the rotor. It cover these components, and keep them from contamination, it is also responsible for helping to distribute electrical current from an ignition coil to a set of spark plugs. You will find that the contacts inside the cap wear easily and it must be replaced along with the rotor for the engine to run smoothly.

PREMIUM QUALITY - This mercruiser distributor cap is constructed from PBT and PET plastics for increased strength, stiffness. The solid brass contacts help settle wear related failures and provides excellent conductivity. We warranty it's high quality and all parts are hand inspected off the line before packaging and once again by our team before shipment.

REPLACES PART # - Mercruiser distributor cap and rotor 815407Q5, 815407A2, 18-5274, GLM 71790. This is for MerCruiser 4.3L V-6 Engines with Thunderbolt IV and V HEI ignitions, 1980s to early 2000s. Please check part numbers to ensure proper fit when you purchase.

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank

【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger.

【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage.

REPLACEMENT DISTRIBUTOR CAP & IGNITION ROTOR KIT - A distributor cap is a removable component that used in spark ignition systems to cover both the distributor and the rotor. lt cover these components, and keep them from contamination, it is also responsible for helping to distribute electrical current from an ignition coil a set of spark plugs. You will find that the contacts inside the cap wear easily and it must be replaced along with the rotor for the engine to run smoothly.

PREMIUM OUALITY - This mercruiser distributor cap is constructed from PBT and PET plastics for increased strength, stiffness. The solid brass contacts help settle wear related failures and provides excellent conductivity. We warranty it's high quality and all parts are hand inspected off the line before packaging and once again by our team before shipment.

REPLACES PART # - Mercruiser distributor cap and rotor 805759Q3, 805759T3, 805759T1, 18-5273, 18-539,GLM 71510. This is replacement for MerCruiser 5.0L, 5.7L, 7.4L, 8.2L, 350 V8 Engines with Thunderbolt IV and V HEl ignitions, 1980s to early 2000s. Please check part numbers to ensure proper fit when you purchase.

Water pump impeller replacement kit: Water pump impellers are the most commonly replaced item on outboard motors. In order to keep the engine running smoothly, impellers should be inspected and replaced once a year or every 100 hours of operation. Save thousands by maintaining your cooling system by testing and replacing your impeller regularly. This water pump kit with casing includes everything you need to rebuild a seawater pump.

Replaces part # - This replacement water pump repair kit for Johnson Evinrude OEM # 5001594, 5001595, 390768, 391637, 392750, 393082, 395060, 395062, 435447, 4333047. 4421, 435929, 5001595 Sierra Marine 18-3392. Compatible with Johnson Evinrude V4 V6 V8 85HP 90HP 115HP 120HP 130HP 135HP 140HP 150HP 175HP 200HP 225HP 235HP 250HP 300HP outboards. Check the compatibility list in the product description to make sure it fits your model.

Premium quality: the kit is made of high quality materials for improved performance and reliability. The impeller is made of a neoprene rubber compound for flexibility and long-lasting performance. We offer pre-assembled water pump kits to eliminate time spent sourcing individual parts and include everything needed to restore the water pump to factory specifications, allowing you to focus on completing the job as efficiently as possible.

✅REPLACE 3rd BRAKE LIGHT - This third brake light is a perfect replacement for your old or broken one. Premium brake light could make you and others more safe and illuminate your truck bed at night.

✅COMPATIBLE WITH - 1994-1996 Ford F150 | 1994-1997 Ford F250 |1994-1997 Ford F350 | 1992-1996 Ford Bronco, please check your compatibility before purchasing this 3rd brake light for your love truck.

✅UPGRADED FEATURES - Made to meet the OEM standards, IP67 waterproof design to prevent from dust, mud, snow or heavy rain, total 14 LED lights for better brightness, 100% tested before shipping.

CONVENIENT FUNCTION - The T-handle latch excellent fit and replacement for broken box latch. Saved you from having to purchase and install an entirely new storage box on your work truck. It can work in many situations such as electrical cabinet, toolbox, power distribution cabinets, control cabinets, vehicles Tool box, Caravan, Truck, RV etc.

OUTER DIMENSION- The tool box locks outside dimensions 4-3/4in x 4-7/8in, the depth is 2-2/3in, the amount of throw on the latch is 1-1/2 in. Perfect fit for your UWS, Better Built, Dee Zee, Kobalt truck tool box ect. Each lock comes with two matching keys. It’ll be a small, useful tool to prevent any dangerous situations from occurring when you’re on the road.

EASY TO INSTALL - Our latch lock is equipped with four rivets to help you easily replace damaged or worn latches. This perfect trailer door latch will then ensure everything stays safely in place within their respective cabinets and drawers during travel.

REPLACEMNET IGNITION SENSOR KIT - Ignition pickups are located inside the distributor and function as the trigger for the ignition system to produce spark. When something bad happens,such as,engine stalling,or do not start the vessel,they means you need to replace a new ignition sensor.

COMPATIBLE WITH FOLLOW MODELS - The ignition Sensor is used on Mercruise Thunderbolt I IV, Gen VI, MR, MAG, ALPHA, BRAVO, for 1981 - 1997 V-6 V-8 205 260 240 260 305 320 350 425 450 454 465 500 502 525 575 600, 4.3L 5.0L 5.7L 7.4L 8.2L engines.

REPLACE PART NUMBER - 87-91019A3, 87-91019A2, 87-91019A6;87-892150A02,87-861780A2,87-861780A4;87-892150Q02,87-861780Q4;Sierra 18-5116,Mallory 9-29804.

REPLACEMENT EMERGENCY STOP SAFETY LANYARD - This mercury kill switch lanyard includes a curly sprung red cord preventing accidental catching, with an over-sized plastic clip for attaching to your clothing or lifejacket so that the engine will be stopped if you accidentally fall over the side.

PREMIUM QUALITY - The Boat Engine Stop Switch Clip is made of high quality plastic, waterproof and durable. The Lanyard is made of high Nylon Fiber, extendable and flexible, 6” coiled and stretched is close to 36” or longer, with swivel snap hook to prevent tangles.

REPLACES PART # - 8M0092849, 15920T54, 15920A54, 15920Q54. This is fit most Mercury Mercruiser Boat Engine. Please check the fitment in the product description below. Or Message us if you are not sure your Boat Motor Part Number.

FITMENT - Fit ANY US standard vehicle that has a flat surface under the bumper cover, the size of this license plate frame is 12 x 6x 1 inches, and comes with all hardware.

EASY TO INSTALL- This electric license plate frame can be installed in only takes 5-10 minutes.( Please feel free to contact us via email if you need user’s manual)

PREMIUM QUALITY - Made of iron and plastic, never get rust.The cushion use aging-prevent army used canvas, can withstand the sunshine, rain, and any tough environment.

【Connection】CGA-580 Inlet Connector fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier. 1/4-Inch Male Flare Outlet Connection fits HVAC Charging Hoses for HVAC unit pressure checking and purging. The 80" (6.6FT) hose will give you a safe distance to avoid injury.

【Accurate Pressure Gauge】This pressure Nitrogen Regulator has two easy to read 2 inch pressure gauge with scratch-resistant plastic protective film and rubber cover. Input: 0-4000PSI. Output: adjustable 0-400PSI. We can accurately read the index in the meter. NOTE: The gauge shows 600PSI that you can rate them at 400PSI, but they are able to go up to 600PSI.

【Application】The Nitrogen regulator is a standard pressure control valve used to reduce the input pressure from gas or liquid stored in a pressurized tank. It is great for HVAC purge, pressure test for air conditioning, leakage tests, soldering and keg beer distribution. The accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC purging.

For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with ball locking device

With bit adaptor no. 620 also suitable for 1/4" bits

Easy access to deep-fitting screws in confined areas

Product Updated: BETOOLL argon regulator comes with a 6.6Ft 5/8-18RH Male hose, keep a safe distance between tank and soldering project.

CGA580 Connection: The argon flowmeter is fits standard CGA - 580 Gas Tank. Compatible with many gases, including CO2, argon, helium, etc.

Pressue Gauge: The argon gas regulator is equipped with pressure gauge, which show the pressure of gas cylinder range from 0 to 4000 PSI.

Gas Service: Oxygen

Delivery Range (psig): 150

CGA 540 Connection: Oxygen

Allows removal of empty cylinder for refill without interrupting propane supply

For RVs with dual propane tanks; Automatically switches from primary to reserve tank when primary is empty

Pairs well with our 48 Inch Thermo Plastic Hose, item 100383-48.

CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots

Nitrogen Regulator, Delivery Pressure 0-4000 PSI.

Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system)

Never run out of propane with our Bulit-in gauge

Comes Pre-purged and ready to fill

High grade Steel welded construction

Designed for light and medium MIG and TIG applications

Provides accurate flow of gas

Dual scale-gauge with impact resistant polycarbonate lens and machined brass body for maximum durability

Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas

Bright orange float ball visually confirms the flow of nitrogen gas

Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.

PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank.

RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability.

Welding Gas to Your Door - Get PrimeWeld's industrial grade 75 %Argon 25% CO2 gas cylinder delivered right to your door. We offer different mixtures for any application, and you can purchase a tank without worrying about costly rental fees or wasted trips out to your local welding supply shop.

The Specs - Our 125CF Argon CO2 welding gas tank arrives full and ready to go. Unlike competitors, our cylinders come fully certified, DOT 3AA, and 10-year date stamped. You'll never have to worry about your tank being turned away for a refill.

Best Gas for MIG - Our blend of Argon CO2 is the perfect all-purpose MIG welding gas. It's a cost-effective option that can be used to weld most metals, including mild steel and nonferrous metals, ensuring a desirable combination of arc stability, puddle control, and reduced spatter.

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank

【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger.

【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage.

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet)

2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.

3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments.

INLET ✔ CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles

OUTPUT ✔ Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting- 1/4" Hose Barb Adapter Included

WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering

➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure.

➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation

⭐Argon hose made of high-quality rubber materials, environmentally friendly, non-toxic, harmless to the human body, high-quality toughness, high pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather

⭐Sophisticated workmanship, the CO2 Flow Meter Regulator Hose can withstand the maximum working pressure of 290psi and the burst pressure of 800psi

⭐The argon gas regulator hose suitable for argon, argon/carbon dioxide mixture, helium, suitable for various TIG and MIG welding machines

Oxygen connection: CGA-540

Acetylene connection: CGA-510 (Not for use with smaller 'B' or 'MC' tanks)

"B" Fitting (9/16" - 18) Outlet Connection

SIMPLE AND SAFE CONNECTIONS ✔ The industry-standard CGA-580 inlet fits all Nitrogen, Argon, Helium, and Inert Gas Tanks. The 1/4" SAE Male Flare Outlet Connection features 7/16-20 threads for easy hook-up to your HVAC gauges, shock absorber chucks, and more!

CONSTRUCTION ✔ Solid brass, full size regulator with clear, easy to read, single-scale 2” gauges covered with rubber protectors, keeping them safe from bumps and dings on the jobsite.

HIGH PRESSURE, ACCURATE DELIVERY ✔ Input: 0-3,000PSI (Gauge reads 0-4,000PSI) Output: adjustable - 0-600PSI (gauge reads 0-800PSI.