Best Uhppote in 2026

✅An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.

✅0/5/10 seconds autolock time delay adjustable, default is 5 seconds

✅The function of the receiver is that when the power is on, the lock of your kit is locked and when you press the remote the lock will unlock temporarily to open the door.

✅ The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 remotes, and it has a range of 164 feet.

✅ 280kg holding force electromagnetic lock offers reliable performance.

✅ The remote communicates with the receiver to let people in

Switch Type: NC (Normal closed type)

This Contact Works with Any Access Control or Burglar Alarm System Available

This contact can't connect directly to power, it works with your alarm system provide a switch signal. Working current under 12V

Attencion: Non UL-Certification Listed

Key lock available; Dual Action

The HC102 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches

✅This lock offers fail-secure operation, so when power is lost, the strike locks the door

✅The No-Cut Electric Door Strike (Fail-Secure) is used to convert a cylindrical lockset into an electronic access-controlled locking system

✅This "no-cut" model is specially designed to fit most metal or wooden doors with only minimal cutting required of the door frame beyond the hole for the strike

Z & L bracket special stent for 600-lb series electromagnetic locks (Indoor)

Special aluminum, firm and durable

Special design, suitable with wooden door and metal door

Multiple reserved holes, and the installation is pretty easy.

Plastic cover,can keep the device from rain,sunshine etc.

Waterproof, professional cover for Access Control System Component.

Fail safe, NC mode (Unlocked when power is removed)

Holding Force: 1000kg / 2204.62lb

This electric strikes with 4-27/32" faceplates are designed for use with mortise or cylindrical type lockset with up to 3/4" latchbolt projection without deadbolt

✅Field-selectable for fail-safe or fail-secure operation

✅2,200-lb (1000kg) Jaw strength, Tested to 500,000 cycles

✅Complete mounting hardware included, Screw terminals for ease of wiring

Fail secure, NO mode (Locked when power is removed)

This electric strikes with 4-27/32" faceplates are designed for use with mortise or cylindrical type lockset with up to 3/4" latchbolt projection without deadbolt

Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation

High quality and high security, sensitively and response quickly;

Full programming from the keypad, support add/delete cards, set password, etc. Door bell button support external doorbell.

The keypad uses HIGH PERFORMANCE MCU to ensure stable performance, and low-power circuit makes the service life longer.

✅280kg holding force electric magnetic lock offers reliable performance.

✅Can be used as a stand alone keypad. Doesn't need to connect on the computer, can works alone.

✅The access control keypad is made of high quanlity ABS plastic and the panel is made of hard shell rubber film.

Warm Tips: Non UL listed; The strobe light flashes red.

Three different tones, you can choose any one of them according to your need.

Super loud sound, the alarm volume over or equal to 105dB

✅Field-selectable for fail-safe or fail-secure operation

✅This strikes feature an ultra-compact design and adjustable stainless steel keepers with over 2,200lbs [1000kg] of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.

✅Suitable for fire exit door with Push-rod lock.The operating principle of electric strike is that electromagnetism produces the force to pull or push the release lever so that to lock or open the door

Works as a regular 125KHz RFID

Compliance: EM4100, TK4100 and compatible

Compatible with stand EM ID access devices or ID reader

Easy to setup and use, Stable and reliable performance, high receive sensitivity

GOOD WIRELESS RF SIGNAL,it can pass through walls, floors and doors,control receiver from any place within a reliable distance

It adopts non-directional wireless encoding technology, allowing independent control without mutual interference, can be flexibly configured in quantity and in operating modes

✅NC mode - (locked while supplied with power), fail safe mode

✅LED Indicates the door Status

✅Holding force about 280kg (600lbs)

✅NC mode - (locked while supplied with power), fail safe mode

✅LED Indicates the door Status

✅Holding force about 350kg (800-lb)

Strong Zinc Alloy Electroplated anti-vandal case

Full programming from the keypad

2000 users, supports Card, PIN, Card+PIN

APPLICATION: Application for monitoring picture segmentation, full screen display for each channel, automatic display by turn mode. Switch between NTSC and PAL system. Picture In picture show, PIP position switched (top left, top right, bottom left, bottom right corner).

FUNCTION: Real Time Color display by four-screen, three -screen, two -screen, and can be switched to splitted by up and down, or right and left;

High Performance Freeze Function: Flicker Free Image Capture

Each hinge is 4inches x 4inches with square corners and made of steel with steel components

3mm thickened material: High cost of material to ensure the long service lives of our products.

Accessory mounting screws: Mounting screws will be packaged as a gift when you purchase our products.

Plastic Panel with Elegant Style

The Best Choice for Access Control

Current Rating: DC36V/3A

✅280kg holding force electric magnetic lock offers reliable performance.

✅Can be used as a stand alone keypad. Doesn't need to connect on the computer, can works alone

✅With lock relay output, secure / normal Mode, NO / NC output

Fail Secure: Locked when power removed.

It is made from durable and high aluminum lock body and stainless steel bolt.durable for use.

Special photoelectricity control,three steps current application.

Voltage: 12VDC

MOV Provides Reverse Current Protection

Door statue signal output contact(NO/COM)

High Quality: This system has a top-quality speaker and high-sensitive microphone. Especial the metal tube microphone is a deal for the counter and the dual-way inter-communication.

Loud and Clear Voice: This system adopt the advanced microcomputer.

Streamline Design: The main unit has an aluminum alloy shell, and the extension has a built-in speaker.

✅Input Voltage: AC110V

✅Control of memory up to 20,000 user / Up to 100,000 event buffers

✅Network communication via TCP/IP

Material: 201 Stainless steel

Surface treatment: Steel wire drawing

Color: Wire drawing

The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.

Support wiegand 26bits or wiegand 34bits output format.

Ultra-low power consumption, the standby current is less than 50mA.

Material: 201 Stainless steel

Surface treatment: Steel wire drawing

Color: Antique bronze