Best Ultimation in 2026

5 pack Conveyor Rollers. Each roller is 1.5 in. overall diameter

18 Ga. galvanized steel tube

10" between frames to suit 12" overall width gravity conveyors

10" Between Frame, 16 Ga. Galvanized Steel Roller

1/4″ diameter mild steel axle, 11″ long

Roller brackets are available in (2) length configurations: 10″ between frame and 16″ between the frame. Durable, 100-pound capacity.

10" Between Frame, 16 Ga. Galvanized Steel Roller

Crimped, oiled bearings

1/4″ diameter mild steel axle, 11″ long

Suits 3 inch, 4 inch, and 6 inch tall I-Beams (measure top of flange to bottom of flange). 1,000-pound load capacity.

Industrial grade I-Beam Trolley as used in automotive assembly plants. Rugged Cast Iron body construction.

Comes with load carrying hook plate attachment, and side guide rollers to help the trolley glide smoothly, traverse corners and prevent unnecessary wear on track.

16″ between frame, 16 Ga. Galvanized Steel Tube Roller with crimped, oiled bearings

2-hole steel mounting bracket, 9/32″ for 1/4″ axle (3) mounting holes, 13/32″ opening for 3/8″ screws or bolts

Conveyor roller is spring loaded on one end and is removable from the bracket.

15" Between Frame, 1.97" Diameter x 16 Ga. Galvanized Steel Roller

Crimped, oiled bearings

7/16″ hex mild steel axle, 16-1/2″ long

15" between frame, 14-1/2″ tube length (rolling surface)

1.9″ spring-retained, galvanized roller covered with .062" thick orange polyurethane roller cover. Polyurethane covers are temperature rated for operation within -80°F to 200°F (-62°C to 93°C)

250-pound max. load capacity

21" between frame, 20-17/32″ tube length (rolling surface)

1.9″ spring-retained, galvanized roller covered with .125" thick orange polyurethane roller cover. Polyurethane covers are temperature rated for operation within -80°F to 200°F (-62°C to 93°C)

250-pound max. load capacity

5 pack of 1.9" diameter conveyor rollers. 15" between frames to suit 18" overall width gravity conveyors.

18 Ga. galvanized steel tube

16-1/2" long 7/16" hex mild steel axle. Spring retained on one end.

18″ Overall width (from outside of frame to outside of frame) 15″ between frames

5′ Overall length with Galvanized 1.9″ diameter steel rollers

Roller centers of 6″ between rollers (other spacing available). Steel frame 3-1/2″ deep x 1-1/2″ flange x 10 ga. powder coated steel

12″ Overall width (from outside of frame to outside of frame) 10″ between frames (i.e the widest product than can move along the conveyor)

3 ft overall length with six galvanized 1.5" diameter steel conveyor rollers

Maximum load capacity of 540 pounds when conveyor frame is fully supported

Adjustable height light duty conveyor leg (H-stand) for conveyors and roller stands. Suits all 18" wide gravity conveyors from Ultimation

Adjustable for both height and angle. Can support one conveyor or two conveyors when joined together

RSL-16 supports are adjustable from 23" to 38-1/4" to the top of the leg (conveyor rests on top and will be 2-1/2" higher depending on model)

Adjustable height light duty conveyor leg (H-stand) for conveyors and roller stands. Suits all 18" wide gravity conveyors from Ultimation

Adjustable for both height and angle. Can support one conveyor or two conveyors when joined together.

RSL-16 is adjustable from 23" to 38-1/4" to the top of the leg (conveyor rests on top and will be 2-1/2" higher depending on model)

Adjustable height light duty conveyor leg (H-stand) for conveyors and roller stands. Suits all 12" wide gravity conveyors from Ultimation

Adjustable for both height and angle. Can support one conveyor or two conveyors when joined together.

RSL-10 is adjustable from 23" to 38-1/4" to the top of the leg (conveyor rests on top and will be 2-1/2" higher depending on model)

Adjustable height light duty conveyor leg (H-stand) for conveyors and roller stands. Suits all 12" wide gravity conveyors from Ultimation

Adjustable for both height and angle. Can support one conveyor or two conveyors when joined together.

RSL-10 supports are adjustable from 23" to 38-1/4" to the top of the leg (conveyor rests on top and will be 2-1/2" higher depending on model)

Constructed from heavy duty zinc plated steel

Use to create gravity conveyors and conveyor side guides

Can be bolted onto surfaces in any orientation

21" between frame, 20-17/32″ tube length (rolling surface)

1.9″ spring-retained, galvanized rollers covered with .125" thick orange polyurethane roller cover

Polyurethane covers are temperature rated for operation within -80°F to 200°F (-62°C to 93°C)

Constructed from heavy duty zinc plated steel

Use to create gravity conveyors and conveyor side guides

Can be bolted onto surfaces in any orientation

500-pound load capacity

3' overall length

(6) galvanized 1.5" Dia. rollers

Heavy Duty galvanized construction - 200 pounds per foot load rating

1,000 pound maximum load capacity when fully supported with evenly distributed load

Made in the USA by Ultimation Industries, LLC

Heavy Duty powder coated steel construction - 223 pounds per foot load rating

Suitable for conveyors and conveyor side guides

4 wheels per foot - 3" wheel centers on one side

55 Pound load rating per wheel

Bearings are lubricated for life and never need oiling

Designed for one million revolutions at full load

Complete gravity conveyor set with frame, rollers, and two sets of conveyor legs

24" overall width (from outside of the frame to outside of frame), and 22" between frames (i.e the widest product that can move along the conveyor)

3' overall length, 6" spacing between rollers

Constructed from heavy duty zinc plated steel

Use to create gravity conveyors and conveyor side guides

Can be bolted onto surfaces in any orientation

10" between frame, 16ga. galvanized steel tube

1.5" spring-retained, galvanized roller covered with 1/16" thick orange polyurethane roller cover. Polyurethane covers are temperature rated for operation within -80°F to 200°F (-62°C to 93°C)

100-pound max. load capacity

Fits 1/4″ round axle. 100-pound max. load capacity.

Galvanized steel

(2) slotted mounting holes, 13/32″ opening for 3/8″ screws or bolts.

Heavy Duty powder coated steel construction - 223 pounds per foot load rating

Made in the USA by Ultimation Industries, LLC

Quickly create your own flow rack system for cartons, pallets and totes

Heavy Duty powder coated steel construction - 260 pounds per foot load rating

Made in the USA by Ultimation Industries, LLC

Quickly create your own flow rack system for cartons, pallets and totes

Complete roller stand conveyor set with gravity roller conveyor and 2 adjustable height support leg sets (one set for each end)

12" Wide (10" between frames) x 5 Feet long. Frame: 2-1/2" deep x 1" flange x 12 gauge steel frame (see graphics for explanation of dimensions) Surface finish: Powder coated frame painted in Ultimation Blue; galvanized corrosion resistant rollers.

Shipping: Ships in 3 pieces -- conveyor + 2 leg sets Rollers: 1.5" diameter galvanized rollers spaced of 6" centers

Heavy Duty galvanized construction - 200 pounds per foot load rating

1,000 pound maximum load capacity when fully supported with evenly distributed load

Made in the USA by Ultimation Industries, LLC