Best Urmecch in 2026

❤ The injector tester 4 pulse mode’s car fuel system scan tool, it can help diagnose injector problems. You can use it to test each injector individually to help identify stuck, leaking or burnt-out conditions.

❤ Injector Tester comes with LED display and 4 pulse modes - Single / Short / Long/ Continuous modes. It can help you identify if the injector is good when you switch off the engine.

❤ The tip of the 2pcs probe perfect for wire piercing, back-probing harness connectors, automotive sensors, diagnostic troubleshooting. No need to strip off the cables and no damage to the cables.

❤ Package Includes--This pin removal tool kit includes: 80pcs Pin Extractor, 4pcs Car Oil Seal Screwdrivers Set, 1pc Light Circuit Tester Pen, 1pc Car Brake Liquid Digital Tester, 2pc Multi Meter Test Probe, 1pc Wire Cable Cutter, 1pc Cable Wire Pen Stripper, 1pc Tread Mark Measuring Tool and 1 Protective EVA Bag.

❤ High Quality--This pin removal tool kit are made of high quality material, the pin extractor tool consists of steel and plastic. flexible, resilient and durable.

❤ Easy to Use--The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. The O ring handle make it more safe to operate the terminal pins connectors.

❤ High Quality--URMECCH jack pad is made of heavy duty construction rubber material, it is both firm enough to support the vehicle and soft enough to absorb hard edges while supporting the vehicle.

❤ Fit for Mercedes --Fit for Mercedes A B C E Class COUPE GLS GL M R S W203 W204 W212 W211 W164

❤ Fit for Porsche SUV Universal--Fit For Porsche Macan Cayenne; Note: The size of the rubber pad is slightly different from the size of Porsche’s jacking point, but it does not affect the use. Please measure the size before purchasing.

❤ Premium Carbon Steel & Plastic: Engine Undertray Clips Screws are made of high-quality carbon steel material, which is not easy to rust, anti-oxidation, anti-vibration, strong and wear-resistant, the screw thread are clear and smooth, and the U-shaped spring clip has good elasticity and durable.

❤ Extend Engine Life: Undertray Cover Fastener as effective car body trim clips to prevent mud from splashing on the body when the car is running, not only keeps the body clean, but also protects the engine from being hit by gravel, effectively prolonging the life of the engine, it is a good choice for damaged screws replacement.

❤ Easy to Use and Replace: Car trim clips are ergonomically designed for easy grip and use, push-on car retainer clips, easy and quick to install, easy to replace damaged parts, less time and effort than going to the local garage to replace the retaining clips, lightweight and saving space, easy to carry and replace in time on the go.

Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.

Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.

Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.

QUALITY ASSURED

Reduces: rough idle, engine surge, hesitation, and spark plus fouling

20 oz. bottle.

Rapidly cleans diesel injectors, turbos, blocked DPFs and dirty EGR systems

Restores performance, improves fuel economy and results in smoother idling

One 12 oz bottle treats 40 gallons of diesel - use every 5,000 miles

3-in-1 fuel additive keeps new engines clean and improves vehicle's performance

Improves fuel economy an average of 3.2 percent

Increases horsepower an average of 2.6 percent

Removes harmful deposits that accumulate from normal use

Improves fuel/air flow and overallengine performance

For use with all 2‐ and 4‐cycle carbureted and fuel‐injected gasoline engines

Removes carbon deposits from key engine parts

Prevents future carbon buildup on port/indirect fuel injectors, intake valves, and ports

Maximizes engine performance and fuel economy

Reliably helps prevent water from entering the fuel tank

Still allows air to vent freely during normal sea conditions and washdowns

Eliminates the need for an anti-siphon loop in the vent hose

Ideal replacement - this fuel injector sleeve is a direct replacement for the original equipment part on specified engines

Durable construction - this part is made from quality materials to resist damage from fuel and extreme temperatures

Cost-effective solution - offers original equipment quality at competitive price

Maximizes engine performance with all grades of gasoline, including ethanol-blend fuel

Removes varnish and gum deposits from fuel lines, tanks, carburetors, injectors, intake valves and spark plugs

Help control corrosion, gum and varnish build-up and phase separation associated with ethanol-blended gasoline

Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds;

Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut;

Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working;

operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.

works with engine off and pulse timer may be used with fuel pressure gauge.

large led display/4 pulse modes. test lead: 41.5cm / 16.3 inches.

A set of 8 fuel injector adpators for the 99 and up GM trucks

Please see the pictures of either end of the adaptor to make sure this is what you need.

Connects to the harness is for the Delphi Mini connector.

[Capacity of the injector]: 1/4 oz/7.5ml---2oz/60ml.

[Feature]: inject oil/dye on low side with AC on, works great.Makes oil injecting into the R-134 R410a R22 R12 system a breeze.

[Instructions]: You can view the second image to use the product.Oil cylinder is filled with 2 ounces of refrigeration oil, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer cylinders.

(Specifics) This is a 8PCS Set USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

(Compatibility) Fits Newer Fuel Injectors applied by LS2, LS3, LS7 Engines. Please Make Sure the Connector is the Same to your Original One before Purchase.

(Interchangeable Part #) EC264, WPT-159, 57-5361, 1P1580, 960, 712, PS38764, 1U2Z14S411BPA, 17400-08.

✔Convenient, keyless design - lift built-in tab on cap and turn to open or close.The product is simple and convenient to use

✔Complete with stainless steel retaining chain, to avoid losing or misplacing cap

✔Material:Deck Fill/Filler is cast from marine grade stainless steel 316, the surface is hand mirror polished,the surface is smooth and beautiful.Lost wax process and cover surface polished

Product Type:Auto Part

Item Package Weight:0.48 Kilograms

Item Package Dimension:5.4 cm L X22.0 cm W X28.2 cm H

Provides more driving pleasure through optimized performance yield

The engine starts better and even runs more smoothly

Suitable for all 2- and 4-cycle gasoline engines

Product type :AUTO PART

Package dimensions :7.874 cm L x8.382 cm W x2.794 cm H

country of origin :United States

【PREMIUM QUALITY】Fuel Injector Connector, made of high quality material for long lasting durability ,ensuring maximum performance and extended service life.Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping

【REPLACEMENT FUEL INJECTOR CONNECTOR】These are the cut and splice style, which is very easy to do, and better since you can choose the length of the plug and eliminate unnecessary electrical connections when using the plug and play style clips.

【REPLACES PART NUMBER】EV1-8

✔️️ 𝗤𝗨𝗜𝗖𝗞 𝗦𝗜𝗣𝗛𝗢𝗡, 𝟭𝟬 𝗟𝗜𝗧𝗥𝗘𝗦 𝗣𝗘𝗥 𝗠𝗜𝗡𝗨𝗧𝗘 - Luigi’s Transfer Siphon is quick, practical and hassle-free. At full flow, it runs at around 10 litres per minute to empty containers faster and cleaner than a scoop

✔️️ 𝗗𝗨𝗥𝗔𝗕𝗟𝗘, 𝗛𝗘𝗔𝗩𝗬-𝗗𝗨𝗧𝗬 𝗠𝗔𝗧𝗘𝗥𝗜𝗔𝗟 - This siphon is made with durable, sturdy PE plastic; suitable for transferring chemicals, concentrated acids, solvents, & alcohols; methanol, biodiesel, isopropyl & gasoline - to name a few

✔️️ 𝗙𝗢𝗢𝗗-𝗚𝗥𝗔𝗗𝗘, 𝗦𝗔𝗙𝗘 𝗙𝗢𝗥 𝗙𝗥𝗘𝗦𝗛 𝗪𝗔𝗧𝗘𝗥 - This siphon is made with durable, sturdy PE plastic; suitable for transferring chemicals, concentrated acids, solvents, & alcohols; methanol, biodiesel, isopropyl & gasoline - to name a few

NEW Y-Bar edge removes over 90% of standing water

15 Times less friction than terrycloth towels

Ergonomic soft edge handle with medical grade silicone blade will not scratch.

ELIMINATE GUESSWORK: The ABN | Fuel Injector Pulse Tester Noid Light Kit is a fuel injection tester that confirms injectors are receiving the signal to open and close (spray) when diagnosing performance issues; If your no-start vehicle has a rough idle, plug into injector connectors, idle air control EFI/ECU/PCM/PMU/AARP/NATO/NASA, and allow it to rule out any electrical issues; Not for diagnosing gummed or shorted injectors or confirming fuel movement but helps to rule out (or in ) problems

GET YOUR VEHICLE RUNNING SMOOTHLY: Fuel tester noid lights work with American domestic and European/Japanese imported vehicles with fuel injector systems; Includes 8 noids with different terminal pin configurations to match a wide variety of plugs (flat vs. rounded posts, wide vs. close apart, thin vs. thick); 3 noids compatible with GM, 1 compatible with Ford, 2 labeled Bosch, 1 GEO, and 1 MULTITEC-2

EASY TO USE: Disconnect fuel injectors, insert noid light, and watch the end of the extension when you turn over the engine (a flashing light indicates normal pulsing voltage); If the light flashes when the engine is on, the "engine control module" or "program control module" (not car computer) is giving the injector the current to open and close and therefore the injectors are receiving the signal to open and close solenoids to inject fuel; If not, injector may be gummed up and need cleaning

Replacement for: LB7 6.6L 2001-2004:Chevy Silverado Duramax 2500,GMC Sierra Duramax 2500,Chevy Kodiak,GMC Topkick Diesel.

REPLACES PART NUMBER: 97228929.

MATERIAL: Stainless steel,10.9 level high strength bolt

Aftermarket item, exactly same function as original

set of 8 USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

Fit many of the newer fuel injectors for the LS2, LS3, Ford, Dodge and many more.

[INFORMATION]This fuel injector connector is 2 wire, 5.5inch harness wire length

[PART NUMBER FITS] Repalces 5013995AA 5161919AA 88988313 89046636 89046836 89046838,S824,15306318 1U2Z14S411ANA 1U2Z14S411BPA 1P1344 PT2160.

[QUALITY CONTROL] This fuel injector connector installation set is 100% testing during the manufacturing process.