Best Watts in 2026

The access panel pops in and out of position with no visible clamps or screws to allow easy access to plumbing, wiring, cables, and other electrical components and fits any size and shape hole from 5 in. x 6 in. to 8 in. x 8 in

Designed for walls and ceilings up to 3/4 inches thick and may be painted or wallpapered for a perfect match

Spring-loaded clips provide super-easy installation with no framing needed, exact measurements of hole not required to install

This non-portable water expansion tank is for closed loop hydronic heating system piping to control the thermal expansion of hot water and maintain system pressure below the relief sett of the relief valve

The carbon steel tank is pre-charged at 12 psi, has a 4.5 gallon volume, and features a durable expansion membrane preventing minimizes loss of the air change and ensures long and trouble-free life for the system

Made of carbon steel with epoxy finish, mounts to supply piping, with 1/2 inch MNPT system connection and .302-32 inch charging valve connection for on-site charging of the tank

Single lever controls cold and hot water flow from the water supply to the flexible hoses feeding a washing machine

Eliminate pressure on supply hoses and prevent potentially damaging results of a burst water hose

Ball-type design also allows lever to be opened to any position to control water flow

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

Reduces incoming water pressure to protect plumbing systems and reduce water consumption in commercial industrial and residential applications

Water supply pressures range is 25 to 75 psi (172 to 517 kPa) with the standard setting at 50 psi (345 kPa)

Lead free copper silicon alloy with stainless steel strainer and corrosion resistant adjusting and cage screws, high-temperature diaphragm, replaceable seat module

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.

No tools required for installation or removal.

Zero-leak connections.

Brand: Watts Regulator

Part Number: 0342692

Boiler Relief Valve 3/4" 30Psi

Works with polyethylene, PEX, or soft copper tube.

No tools required for installation or removal.

Zero-leak connections.

Ideal for agricultural, irrigation, rural and municipal, and plumbing applications.

Efficiently connects polyethylene pipe, tube, and hose.

Fast and easy to install; Connection can be made by hand, with no special tools required.

The product is manufactured in China

The product is highly durable and easy to use

Easy installation and easy handling

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.

No tools required for installation or removal.

Zero-leak connections.

Guards against excessive pressure in water, oil or air systems used in commercial, residential or industrial applications, including fire protection systems

All-brass construction features an NPT threaded male inlet and NPT threaded female (drain) outlet connections; a stainless-steel spring; a brass bonnet; a Buna-N disc and a Buna-N O-ring

Calibrated adjustment feature sets valve to the required relief pressure

Installed at or near meters to cost-effectively control water pressure flowing to appliances and outlets in residential, commercial and industrial settings

Features a lead-free brass body; an NPT threaded union female inlet by NPT female outlet connection; an integral stainless steel strainer (removable for cleaning); a thermoplastic seat; a bronze-sealed spring cage for accessible outdoor waterworks or pit installations and a thermal expansion bypass

Easily serviced for long-lasting life

Ideal for DIY pipe repair

Fast and easy to install; Simply push to connect, with no need for tools

High-quality stainless-steel construction offers corrosion resistance and long-lasting wear

Lead Free copper silicon alloy body for durability and compliance

A durable rubber diaphragm and disc ensures consistent positive seating and leak-free operation

An easy to use manual drain prevents freezing

The product is manufactured in china

The product is highly durable and easy to use

Easy installation and easy handling

Mat size: 2.5' x 8' (2.5x8 feet), OR (30" x 96" (30x96 inches) 0.76m x 2.44m (0.76x2.44 meters))

25 year warranty backed by USA Manufacturer since 1873

Heated area: 20 Sq Ft

Lead Free bronze body construction for durability and compliance

A single access cover, modular check construction, and top entry access to internal parts allows for easy maintenance

The check seats are replaceable so repairs are economical; the springs are securely captured for safer maintenance

Watts LF7R Series Dual Check Valves prevent the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. They are designed for non-health hazard residential water system containment and continuous pressure applications.

The valves consist of a Lead Free cast copper silicon alloy body construction, with two compact replaceable plastic check modules, and stainless steel springs. They are installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for installation requirements.

Features: Tested and certified by NSF. The Watts LF7RU2-2 Model 0072203 Dual Check Valve has been tested and certified by NSF to meet NSF/ANSI standard 61 Annex G. This certification demonstrates that this valve meets the lead-free qualifications. Extremely Durable and Prevents Backflow. The Watts LF7RU2-2 Model 0072203 Dual Check Valve is extremely durable. Not only does this valve prevent backflow, but it also can withstand temperatures up to 180° F and work with pressures up to 175 PSI.

ANKA spray nozzle trigger gun, designed for full flow garden hose, washdown and spray applications

Manufactured from high grade fiberglass reinforced nylon, non corrosive, suitable for use with drinkable water.

Built tough, the ANKA garden hose nozzles are high impact, robust, durable and virtually indestructible

Lead Free bronze body construction for durability; female NPT inlet and outlet with quarter turn shutoffs

Single access cover and modular check construction for the ease of maintenance

Large body passages provides a low pressure drop; internal relief valve for reduced installation clearances

Machined flange

Bronze body

Serrated arms

Lead free construction

Modular compact design

Replaceable seats and seat discs

Bronze body construction includes machine flange on the inlet side.

Features a 3/4 inch female NPT pipe threaded inlet connection.

Features male straight-pipe threaded outlet connection for locknut.

Watts Marine Bronze Full Flow Ball Valves are UL Marine approved and manufactured from 85-5-5-5 naval bronze. The Watts Marine ball valves feature a heavy duty stainless steel handle and hardware for the best corrosion resistance. All valves are pressure rated to 600psi and incorporate PTFE stem packing seals and seats and are 100% tested in both the open and closed position.

Features: Constructed of 85-5-5-5 naval bronze PTFE stem packing seals and seats Corrosion resistant stainless steel handle and hardware Drain plug for winterization Vinyl insulator on handle Grounding screw

Adjustable stem packing gland Blow out proof pressure retaining stem Fast quarter-turn (open or close) operation Low operating torque No lubrication required UL listed

Ideal for DIY pipe repair or installation, including plumbing for hot and cold water and behind-the-wall and direct in-ground burial water systems

Fast and easy to install; Simply push to connect, with no need for tools or tube inserts

High-quality plastic offers corrosion resistance and long-lasting wear

1/2" Sweat x Sweat Solder Connection (CxC)

Lead Free Brass Construction

2-Piece Full Port

Ideal for DIY pipe repair or installation, including plumbing for behind-the-wall water systems

Fast and easy to install; Simply push to connect, with no need for tools

High-quality plastic offers corrosion resistance and long-lasting wear