Best Weiand in 2026

Permanent mold casting

Includes high rise dual plane design with a square bore carburetor flange

Increases drivability

Permanent mold casting

Includes high rise dual plane design with a square bore carburetor flange

Increases drivability

Features a dual plane design

Delivers maximum horsepower and torque

Designed using permanent mold casting process

Permanent mold casting

Includes high rise dual plane design with a square bore carburetor flange

Increases drivability

Has an all new optimized design for today’s higher output big block engines

Features a low rise dual plane design delivering friendly power and torque across the usable RPM range

Made from permanent mold 319 aluminum construction and is precision CNC machined providing lighter castings with better surface finishes

Permanent Mold Casting

Precision CNC machining

High Rise/Dual Plane Design

Black ceramic coating provides an aggressive look to your engine compartment

Black ceramic is heat and corrosion resistant for long life and durability

Provides an easy to clean finish

Intake Manifold

Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.

We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.

LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Package Dimension : 7.18 " L x 5.37 " W x 1 " H

Item Package Weight : 0.62 pounds

Country of Origin: UNITED STATES

Made of aluminum with a natural finish.Material:Aluminum

Dual plane intake style

RPM range is idle to 5, 500 RPM

Dual plane intake style with an Air-Gap

Air-Gap design separates the runner from the heat of the lifter-valley cover

Temperature sending unit boss clears all water necks

Helps help prevent dirt and debris from entering the valve train for optimal performance

Made of high-temperature resistant material for durability

Contains necessary parts to replace your vehicle’s intake manifold gasket set

Thermoplastic, aluminum, and cast iron intake manifolds available for a wide range of applications

Designs are enhanced and amended to incorporate updates, upgrades, and Technical Service Bulletins

GM-recommended replacement part for your GM vehicle’s original factory component

【OEM DESIGN】The engine manifold gaskets are engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

【PREMIUM QUALITY】Long life-span matters, that is why our intake gasket set are made from high temperature resistant material to provide maximum durability, which help ensure a reliable seal on even the most troublesome applications

【REPLACEMENT FOR】With 3.6L ENGINE | 2011-2014 Dodge Avenger, 2011-2020 Dodge Challenger Charger Durango Grand Caravan, 2011-2019 Journey | 2011-2020 Jeep Grand Cherokee, 2012-2020 Wrangler, 18 Jeep Wrangler JK, 14-20 Jeep Cherokee 3.2 | 2011-2017 Chrysler 200, 2011-2020 Chrysler 300, 17-20 Pacifica, 11-16 Chrysler Town & Country, 20 Voyager| 2013-2020 Ram 1500, 14-20 Ram ProMaster 1500 2500 3500

Fitment: Fits for Yamaha Grizzly YFM 600 Models, Year: 1998 1999 2000 2001

Fits on O.E.M and Aftermarket Carburetors. Part Number: 4WV-13596-00-00, 4WV135960000, 4WV-13596-00, 4WV1359600, 4WV1359600

This carburetor intake manifold boot is made of premium material, sturdy and resistant, good sealing performance

Upgraded materials - this replacement exhaust manifold is constructed of ductile iron to prevent future warping and cracking

Complete kit - includes new manifold, manifold gasket, flange gasket, 3 studs, 3 nuts

Direct fit - reverse engineered from original equipment for seamless installation

Direct replacement - this engine intake manifold isolator bolt matches the fit and function of the factory part on specified years, makes and models

Ideal solution - this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

FIT FOR: 2005-2008 Buick LaCrosse 3.6L; 2004-2006 Buick Rendezvous 3.6L; 2004-2007 Cadillac CTS 3.6L; 2004-2009 Cadillac SRX 3.6L; 2010-2011 Cadillac SRX 2.8L; 2005-2007 Cadillac STS 3.6L; 2008-2012 Malibu 3.6L; 2007-2009 Pontiac G6 Saturn Aura 3.6L; 2008-2009 Pontiac G8 3.6L Engine Intake Gasket Set with Upper & Lower Intake Gaskets.

OE/INTERCHANGE PART NUMBER: 12598158

SPECIFICS: LIMICAR Manifold Gasket Set lead to driveability problems such as rough idling and stumbling on acceleration. LIMICAR Head Gasket prevents liquids and gases from escaping into adjacent cylinders and the surrounding oil and coolant galleries.The purpose is to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinder.They are designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.

Evenly distributes the combustion mixture (or just air in a direct injection system) to each intake port in the cylinder head for proper function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Brand New IMRC Intake Manifold Runner Control Valve Solenoid

Located In The Front Under Intake Manifold

See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model

Repair Kit Includes: 1 X Sonic Cruze Chevy 1.8L intake Manifold Tuning Valve Runner linkage Arm

This is a new OEM part. We ship worldwide. 2011 2012 2013 2014 2015 2016 2017 2018 Chevy Cruze - Sonic 1.8L engine intake manifold Tuning Valve Runner Actuator linkage , Rod , Arm - attaches to intake manifold AC delco 55570283 - this listing is for the actuator link arm only. This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

Fits other vehicles - Engine model #: N18XFH - Chevy - Daewoo - Fiat - Opel corsa astra GM 1.8 Liter I4 Ecotec LUW / LWE Engine

TUNING VALVE RUNNER ARM - TOP quality tuning valve runner arm, Our product is made of reinforced materials and last longer,You can replace old or damaged parts directly.This repair is associated with P2076 DTC Code. It is very easy to replace (install), No need to remove the intake Manifold, No tools required.

COMPATIBLE WITH FOLLOWING VEHICLES - Tuning Valve Runner Arm fit for Chevrolet Cruze - Sonic 1.8L Engine 2011-2018, GM 1.8 Liter I4 Ecotec LUW / LWE Engine, fits other vehicles - Engine model #: N18XFH - Chevy Sonic Cruze 2011-2018 1.8L Engine, please check the fitment in the product description below

REPLACE PART NUMBERS - 55570283 Please check the part numbers whether it suits your vehicle before purchasing.

Ideal replacement - this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - tested to ensure top-quality OEM performance and durability

Perfect fit - designed to match all specifications of the original part for convenient, trouble-free installation

Direct Replacement Intake Manifold Compatible with 1996-1998 Ford Mustang

Direct Replacement Intake Manifold Compatible with 1996-2000 Lincoln Town Car

Evan-Fischer EVA45272043318 Features: Black, Plastic

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive oil consumption

Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete installation

Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and warping

Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles

Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance

Complete repair - includes all necessary gaskets and downpipe hardware

Compatible with all GM LS series engines

Passenger side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port

Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum