Best Xinkunmarine in 2026

Solid Construction:Made of polished 316 stainless steel,anti-corrosion,heavy duty and more durable than plastic rod holders.

Rubber Insert:UV PVC liner with cap,and rubber gasket included,protect your fishing rods from scratching.

Keep Steady:Stopper slot built into the base of the rod holder,can hold the rod in place.

Solid Construction:Made of marine grade stainless steel,anti-corrosion,sturdy and durable.

Heavy Duty:Capable of holding up to 600 lbs.

Easy to Install:Come with 4 screws,simple design makes it easy for anyone to install the boat ladder.

Made of bright polished exterior finish 304 Grade Stainless Steel. it can withstand all kinds of weather and will not rust.

4 Rod Racks - Saving your space,on board storage for rods, tools & accessories,free your hands when you fishing.

Each set rod rack built-in knife, pliers and lure holder.upright for storage against a boat or wall, which can have enough space to store your tools.

Light but Heavy Duty, Made of marine grade aluminum alloy, It won't be bent and corrosion

Surface polish finished,smooth no sharp.

There are rubbers Inserted to protect your fishing rod from any wear against the surface.

Light but Heavy Duty, Made of marine grade aluminum alloy, It can not be bent.

Tubes electroplating treatment will never fade, Surface Polishing finished,smooth no sharp.

Rubber Insert- To protect your fishing rod from any wear against the aluminium surface.

Polished stainless steel has better anti-corrosive performance.

Easy boarding with open step when swiming and diving.

Strong anti-skid pads: The upgraded anti-slip mat is stronger and not easy to fall off.

【All-welded Construction】- Made of Marine Grade 304 stainless steel,Anti-corrosion,withstand harsh marine conditions.

【Dimensions】- Length Folded 15"(373.5mm),Length Extended 34.5"(875mm),Max weight capacity: 600 lbs.

【Security Insurance】-Moulded Black vinyl tread to ensure maximum grip for the user, reducing slippage.

Material:This cup holder is made of tough 304 stainless steel with a shiny polished surface that's corrosion-resistant and built to last.

Wide Application:It fits most cups, water bottles, and thermoses with diameters up to 3.5 inches (that's about 8.89 centimeters).

Installation Method:Easy to install with just six screws, you can secure it to the wall or cabin without any wobbling.

【Anti-Rust】- Polished Stainless Steel has better Anti-corrosive performance.

【Center Dual bar】- Easy Boarding with Open step when swiming and diving.

【Heavy Duty】 - Rated to 400 lbs (181kg) boarding weight.

90 degree angle, Made of polished Stainless Steel 316

Heavy Duty Stainless Steel 316 Deluxe Rod Holders with Drain ,30 Degree

The base of the rod holders close around a cast stainless steel drain tail. The closed-bottom with drain tail design allows for guided drainage to help protect the inside of your boat

Country Of Origin : China

The Package Height Of The Product Is 1 Inches

The Package Length Of The Product Is 1 Inches

Set of 2 adjustable brackets for mounting a curtain rod to the wall

Sturdy steel construction

Extends from 3 to 4 inches out from the wall

Set of 2 adjustable brackets for mounting a curtain rod to the wall

Sturdy steel construction

Original dimension: 3.55x2.3x0.75inch Extended dimension: 4.5x2.3x1.75inch

Soft protective foam inserts

Easy storage solution

Simple to install

Utility twist Lock feature provides extra stability while securely storing up to 4 rods or combos

Molded from durable, lightweight polypropylene

Improved foam and twist lock rod holding mechanisms

Stores 3 rods or combos neatly and securely

Corrosion proof

Easily attaches to wall

Set of 2 adjustable brackets for mounting a curtain rod to the wall

Sturdy steel construction

Extends from 3 to 4 inches out from the wall

Set of 2 Ceiling or Wall Mount Brackets

Made of cast metal

3-1/2-inches long with a 1-7/8-inch diameter base

Most popular value priced, positive locking, open style rod holder; Power Lock Interior Diameter: 1.95″; Mount Dimensions: 4″ x 2″ x 2″; Bolting Dimension: 1 5/16″ x 3 3/16″

Universal cradle holds almost any rod and reel setup and has a front locking ring to prevent rod loss when travelling

Includes 241 Combination Side/Deck Mount and can be mounted on top or side of gunnel

HIGH QUALITY and HIGH END LOOKING: Made of zinc with sleek design. Fits up to 1" diameter corner rods or bay view rods.

FLEXIBLE: Adjustable angle from 90 degrees to 180 degrees.

MORE FINISH CHOICES: Available in 5 finishes: Black; Oil-rubbed bronze; Satin nickel, Pewter and Royal Gold.

Single Construction

All-In-One Design

Easy Installation

Holds a baitcaster reel in a cushioned cradle; No mount included

A slot in the front of the rod holder allows for a spinning reel to be held securely in position

The rod holder design has a side mounted flange, which leaves the bottom open, allowing the rod holder to accommodate trigger grips

Holds 1-3 fishing poles upright for storage against a boat or garage wall

10.75" Rod holders with fishing reel slots

Also holds fishing lures, a filet knife, pliers, and tackle

Highly functional tackle storage cart that accommodates up to 12 fresh water rods

Adjustable middle wire shelf and smooth rolling casters allow room for your favorite fishing gear

Carbon fiber weave on base and top boards provide stability and durability

KEY FEATURES FOR FITS MOST RODS OR COMBOS - The PLUSINNO fishing rod holder can store fishing rods or combos of diameter 0.12"-0.75" (3-19mm), which can maximize the needs of fishing enthusiasts to store different types of rods. Most other brands are only applicable for rods diameter 0.28''-0.47'' (7-12mm). PLUSINNO Fishing Rod Storage Rack will organize most of your fishing gear in minimum space and nice to satisfy your needs of storage and display in daily life.

INNOVATIVE GRIP DESIGN - This fishing rod rack adopts an innovative structure. Applying the principle of eccentric circle, the arc-shaped designed grip roller can hold the fishing rods of different diameters firmly and securely. PLUSINNO fishing pole racks perfectly solves the problem of uneven force on different diameters fishing rods to ensure rods and combos are held securely in your rack which prevents your expensive rods from sliding down and damage.

STORE 9 RODS OR COMBOS - The PLUSINNO vertical fishing rod holder can store up to 9 rods or combos neatly and securely in less than 16 inches of horizontal wall space.Most other brands can only store 3 or 6 combos in the same amount of space. Fishing rods and reel combos can be mounted on the rack at any position of rod length, which make the reels can be staggered at different heights to minimize storage space.

Curtain Rod Bracket includes mounting screws and wall anchors

Drapery hardware bracket - These Drapery rod brackets extends 4 inches (see picture on top left) from the wall

These bracket for curtain rod supports Drapery Rods with .70 inch to 1.1 inch diameter

Anndason Heavy Duty Adjustable Curtain Rod Brackets,add a dash of Style and Elegance to your – home, office or anywhere else you decide to use then.

Adjustable Curtain Rod Brackets perfect for your office, living room, bedroom,dining room, and kitchen,or other place in your home

Heavy Duty Curtain Rod Brackets is made of High quality iron,strong hardness,sprayed with elegant black paint on the exposed parts to provent rust.

Made of High Quality Material PC+ABC , Which is Strong and Durable. for long life

Easy Install and ready to use

30 degree angle designed head.

ADJUSTABLE FISHING ROD STORAGE: Holds up to 6 rod and reel combos, and you can adjust the spacing of the rack to suit your rod length (rods not included)

VERSATILE FUNCTION: Organize your fishing rod and reel combos on the wall or ceiling in your garage, shed, or other indoor or outdoor storage area. You can stagger your rod and reel combos by removing every other cap when storing your gear in a vertical position.

INNOVATIVE DESIGN: Rod handle caps are detachable and sliding track allows you to add, remove, or slide clips for extra customization

holds a baitcaster reel in a cushioned cradle

pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval

rod can be secured in the holder with a soft latching strap which snaps over the top