Best Yates Performance in 2026

For use on any 2008-2014 Dodge Challenger

Lights up your brake lights in outward sequence when turn signal is engaged

Sequences once and stays lit when brakes are applied; Also works with Hazards

Fits any 2001-2004 Mustang or Cobra convertible

Weatherstrip for the front, center, and rear side rails of the convertible top

Both driver and passenger's sides included

Original paint color for quick repair of scratches and chips

Comes with pen & brush applicators for paint and foam applicator for clear coat

Includes abrasive tip to gently remove old paint flakes and clean up repair surface

For use on 1994-2004 Mustangs and 1997-2003 Escort

Replaces the driver's (left) side power window switch

Black plastic with painted Unlock and Lock letters

Stainless axle back exhaust system from ROUSH

Fits 2018-2022 Mustang GT 5.0's

Aggressive, race-inspired sound, looks & performance

Fits any 1999-2004 Mustang V6, GT, or Mach 1

Replaces your honeycomb panel and running horse to give it that Mach 1 look

Includes chrome cobra emblem with bracket, radiator cover, bottom grille delete panel, installation hardware and instructions

Includes two sets of tips. Comes with Roush tips and extra set of custom "3.7" logo tips

Fits 2015-2017 Mustang 3.7L V6

Custom "3.7" Embossed Dual tips are made from 304 Stainless Steel

Emblem designed to be used on modern 5.0's with the Coyote engine

Chrome plated featuring Coyote 5.0 with red white & blue inserts

Sold as a pair; Backing is made of a durable, semi-flexible plastic

Brand new air intake and axle back exhaust kits from Roush

Fits 2015-2017 Mustang V6 3.7 Liters; Does not work with Superchargers

No calibration or tuning required; Hardware and instructions included

Brand new air intake and axle back exhaust kits from Roush

Fits on the 2015-2017 Mustang GT; Does not work with Superchargers

No calibration or tuning required; Hardware and instructions included

Roush's straight exit exhaust with customized tips

Fits 2011-2014 3.5L, all cabs and bed lengths

Includes two sets of tips. Comes with Roush tips and extra set of custom "3.5 Twin Turbo" logo tips

Universal fit: Compatible with all automobiles, boats and devices equipped with a 12 volt power source

Circuit protection: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.

Illuminated switch: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5,000 times pressing.

TRUCK BED EXTENSION. This trailer wiring harness is designed to be an extension of the existing tow wiring of your truck. It retains use of the rear 7-way RV blade socket, while adding an additional 7-way socket in the truck bed

EASY TO INSTALL. No wire cutting No splicing This trailer wire extension plugs into existing factory wiring on your truck and has a 7-foot harness for flexible positioning in the truck bed (2-1/8-inch hole saw required for installation)

HEAVY-DUTY CONNECTOR. The 7-pin trailer wire extension can be used to connect trailer taillights, brake lights, reverse lights, turn signals, electric trailer brakes and an auxiliary power wire

Premium quality: good electrical conductivity, outstanding bending performance, high temperature and melting resistant, longer lifespan

Efficient protection: power relay for safety protection and conversion circuit, blade fuse protected against overcurrent and short circuit

Durable switch: high quality 5 pin on-off rocker switch with laser-etched pattern, simple to install and convenient to use

Universal fitment this wiring harness is compatible with all automobiles, boats and devices equipped with a 12V DC power source

Efficient protection, power relay for safety protection and conversion circuit blade fuse protected against overcurrent and short circuit

Great switch built-in two premium LEDs emit soft light to illuminate the patterns easy for you to find the switch in the dark

12ft wiring harness: more than 12ft of wiring from the switch to lights, has also been extendable, run the harness to your desired lighting location

Two Available leads: with 2 Sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable

Illuminated switch: 3 pin on/off rocker switch with Red Indicator light when truing on, easy to turn on or off, long service life

Premium quality: Excellent electrical conductivity, outstanding bending performance, high temperature and melting resistant, longer lifespan

Protective blade fuse: Inline blade fuse prevents from overcurrent or short circuit. Three extra fuses, more scientific and reasonable

Reliable power relay: Made of advanced materials and well conductive pins to ensure safety protection and conversion circuit

10ft Extension Wires: 16AWG wiring harness extension cable. It’s enough to extend your wiring harness where you want to install lighting location to help you mount LED work lights in truck or cabin easily..Fit Type: Universal

High-quality: The Wiring Harness Extension Kit made of 16 Gauge flexible strand copper wire, rubber protected, High quality PVC insulation tube protect the whole harness from overheat.

Play and Plug design makes the extension wires installed easily

Heavy duty bindings offer a greater hold against vibration, abrasions, and moisture

Protective outer coverings which protect against even the toughest conditions

Wires are color coded correctly for easy installation

Kit includes 8' of 1", 3' of 3/4", 12' of 1/2", 50' of 1/4", 23' of 1/8" Power Braid; 1' of 1/4" & 1/2" Heat Shrink; 100 of 4" Tie Wraps; 50 of 7" Tie Wraps; Electrical tape; Stretch & Seal tape

Allows you to keep your wiring routed and secured away from moving parts, high heat and from abrasion, all while cleaning up the install

Flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables

Package includes all necessary wiring

One Cyclone puts out 516 RAW lumens of light for vibrant visibility

IP68 rated waterproof sealing

Millet MOST VERSATILE ELECTRICAL CONNECTOR KIT - Ring, fork, hook, spade and butt splice heat shrink wire connectors are included in this multipurpose electrical connector kit

DURABILITY AND WEATHER RESISTANCE - Thick copper barrel ensures a strong wire crimp every time. Your wire will never slip out of these connectors

EASE OF APPLICATION - Strip wire insulation, crimp terminal barrel with a wire crimper, and apply heat with a heat gun while rotating a connector

Operating voltage: 12V, 40A power relay fuse and inline blade fuse, up to 180 watt load capacity

2 Wiring Leads: Simultaneously connect 2 LED work lights or 2 small watt LED light bar within 180W

Wiring harness kit with on/ off switch at the length of 2.5m, plenty of length to put it where you want

Universal fit: this harness kit is compatible with all automobiles, boats and devices that use a 12V power source

Two leads Available: with 2 Sets of light output connectors for dual lighting fixtures less than 180W, more stable connection

Simple connection: equipped with DT connector, no wiring between LED light bar and the harness kit, simple and easy installation

Two Available leads 12 feet extendable wiring harness two Sets of light output connectors for dual light fixtures less than 180W

Efficient protection power relay and inline blade fuse ACT as the first Line of defense against overcurrent and short circuit

Shining in the dark built-in two premium LEDs emit soft light to illuminate the patterns easy for you to find the switch in the dark

Operating voltage: 12V 40A Power Relay and 30A Blade Fuse. It is universal fit for LED work lights, 4" 10" 12" 20" 30" 40" 50" light bars within 300W.

4 Model Remote Control SWITCH: ON/ OF/Quick Flashing/ Slow Flashing.

High quality: Heavy duty14 AWG copper wire, waterproof wiring harness, ideal for outdoor use

25' MALE & 4' FEMALE INCLUDED- Our 4-way trailer wiring harness includes both the male and female sides for added value.

WISHBONE STYLE WIRING SETUP- Wishbone design makes it easier to wire to the taillights; simplifies installation process.

SAE J1128 RATED- Meets SAE standards for a low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems; backed by a 2 year warranty.

Plugs into car harness at radio

Power and 4/speaker

16-pin plug

Plugs into car harness

Power/4 Speaker

22-Pin plug

Package: 1 pair. Wire length: 6.01". For use with 12 - 24V. Easy install.

Compatible with the following socket sizes: H11, H9, H8, 886, 889, 892, 893, PG13, PGJ13, 880, 890, 862, 881, 884, 885, 894, 898, 899 etc.

High efficient copper wiring with female connector included, replace OEM socket for any headlights fog lights or retrofit use.