Best Yuesstloo in 2026

Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain.

Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682

Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store.

Steel funnel length: 24.8inch/630mm. Made of steel, more durable to use. Resistant to oil, and not easy to wear.

Flexible Hose: Can be bent at any angle and used in narrow space. It can realize multi-angle liquid infusion and the transportation of liquid in the oil pipeline that is difficult to reach. To meet your different needs.

Easy to Store: The funnel is equipped with a hook, so that it can be held by hand when refueling to prevent the funnel from tilting, make the infusion more stable, convenient to hang on the wall when not in use.

Comes with a portable case, easy to carry and store the tools. Boxes contained crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2, and with a pair of gloves.

Made of high-quality steel, durable, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin.

Yuesstloo Turbo Engine Timing Tool Kit is compatible with Vauxhall Opel, Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Aveo1.2 1.4 (2011-), Corsa-D 1.0 1.2 1.4 (2009-), Cruze 1.4 (2011-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Orlando 1.4 (2012-), Zafira-C Tourer 1.4 (2011-)

Convenient to carry and operate: Camshaft Phaser Timing Chain Tool kit comes with 1 x Camshaft Tensioner Locking Pin, 3 x Timing Chain Holders, 2 x Phaser Locks, 1 x Portable Case, 1 pair x Gloves

Compatible with VW Chrysler Jeep Dodge Grand Cherokee Wrangler. Replace for 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3. And applicable for vehicles with the 3.6L engine.

You can use 10200-1 and 10200-3 on driver's side, use 10200-2 on passenger's side. 10369A is used for 2012 and newer models. If that bolt head is 13MM, some 2011 models may also require 10369A.

Function: Yuesstloo engine camshaft alignment timing tool kit is used to lock and align camshaft, crankshaft, time belt tensioner at the correct timing position, also adjust the VTC device.

Fitment Vehicle: Compatible with Ford Fiesta Focus Escape Volvo S-Max Engine. Works for 2011 Ford C-Max 1.6L EcoBoost, 1.6L Duratec-16V Ti-VCT;13 - 14 Ford Fusion 1.6L EcoBoost; 13 - 18 Ford Fusion 1.5L EcoBoost; 14 - 16 Ford Transit 1.6L EcoBoost; 03 - 05 Mazda MP 3.0L; 04 - 06 Mazda Tribute 2.0L 2.3L & 3.0L; 04- 09 Mazda 3 2.0L 2.3L; Duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, 2.0 twin cam 16V; Duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI; Escoboost 1.6 Ti-VCT 1.5/1.6 VVT

Replace OEM Equivalent Part Number: 303-1097; 303-748; 303-1550; 303-1552; 303-1054; 303-1059; 303-735; 303-1552; 303-393A; 303-393-01; 303-393-02; 303-376B; 303-651; 303-193; 303-507; 303-734; 303-732; 303-xtra

Application: Compatible with Ford Rotunda Expedition Explorer F-150 F-250/350/450/550 Mark LT Mountaineer 5.4L 4.6L 6.8L 3V Engine. Replaces 303-448, 303-1046, 303-1175, T93P-6303-A, 6681, 6024, 525219.

The timing chain locking tool makes camshaft or cam phaser change easily on your vehicle without losing chain tension and removing the timing cover. And the crankshaft positioning tool is used to align and hold the crankshaft at the correct position for timing chain installation.

Convenient to transport and store: Yuesstloo Engine Repair Tools Kit comes with a carrying case, all parts are neatly placed in the case. The kit includes 1 x valve spring compressor tool, 1 x crankshaft positioning tool, 1 x timing chain locking wedge tool, 1 x cam phaser locking tool, 1 x crankshaft pulley bolt, 2 x cam phaser lock out kit, and a pair of gloves.

Comes with a 2801 Flywheel Holder, compatible with BMW N20 N26 engines. Similar to BMW factory tool No. 83302222742 to replace.

2801 Flywheel Holder Tool is used to lock the transmission flex plate in place to perform a timing service on the N20 / N26 engine. Easy to remove the timing chain, secure the crankshaft with the transmission installed.

Helps to release and tighten down the central bolts on the vibration damper. While replacing the timing chain, this tool can hold the flywheel.

Yuesstloo ford 4.0 timing tool kit is designed for the chain driven 4.0 direct injection petrol engines which fitted with variable valve timing. Used for the proper installation of timing kits, especially for the accuracy of synchronization of the time in the engine.

Application: Compatible with 4.0L 4015CC SOHC 12V V6 engine. Compatible with 2004-2010 Ford Explorer Ranger Mustang Land Rover L3 Mountaineer.

Durable to use: Made of high-quality material, high hardness, not easy to break. As same as the OEM, high-precision matching.

Yuesstloo Fuel Injector Removal Kit makes it easy to reseal and reinstall fuel injectors, and used for carbon cleaning on VW TSI, the complete tool kit makes your job efficient and saves your time.

Application: The fuel injector puller tool set is compatible with Audi Seat Skoda VW 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, 4.2 V8 FSI TSI TFSI petrol engine, not intended for diesel engines.

Durable to use: Made of high-quality material, high hardness and high strength, not easy to break, and high-precision matching.

The vibration damper holding tool is used to fix the timing chain drive sprockets while installing and removing the vibration damper on 4cyl 1.8L 2.0L 4V TFSI EA888 engines.

Compatible with Audi Seat Skoda VW. OEM Equivalent Part Number: T10531.

Convenient to transport and store. Comes with a carrying case, includes counter hold tool, tension pins, turning over tool, knurled nut. And we prepare a pair of gloves for you to wear when using the tools.

The 3/8" motorcycle hex axle tool is designed for easy installation, removal, or adjustment of front tire axles. To remove the front tire of your motorcycle efficiently.

The hex axle tool can be used for sport and dirt bikes with hexagonal axle holes, apply to CB1000RR, CBR600RR, R600, GSXR1000, R1, R6, R1000 bikes and some other bikes.

Features four metric hex sizes in a single compact design. Sizes include 17mm, 19mm, 22mm, and 24mm. The 19mm side can be used with a 3/8" drive ratchet or an open-end wrench, and the 17mm side can be used only with an open-end wrench.

Yuesstloo petrol engine timing tool kit is used to test and adjust the camshaft timing effectively, and help you replace the timing belt easily.

Compatible with Ford Fiesta, Focus, EcoSport, B-Max, C-Max, Grand C-Max. Compatible with Ford 1.0 turbo, 3-cylinder, petrol engine.

Engine Code: M1DA, P4JA, XMJA, M1JA, P4JB, XMJB, M2DA, SFJA, M2GA, SFJB. OEM Equivalent Part Number: 303-1605/1; 303-1605/2; 303-1606; 303-1604; 303-1602; 303-73; 303-1054.

Compatible with VW Audi Tiguan SEAT Skoda 1.6 2.0 TDI diesel engine.

OEM Equivalent Part Number: T10265, T10060A, 3359, T10051, T10490, T10264.

Engine Code: 2.0 LT CKFB, CKFC, CRBC, CRBD, CRCC, CRFA, CRFC, CRLB, CRLC, CRMB, CRVC, CSUA, CSUB, CUNB, CUPA, CKFB, CKFC; 1.6 LT CLHA, CLHB, CKKA, CRKB.

Yuesstloo rear axle installer remover kit is used to install and remove the screw nut between the rear drive shaft and the differential. Also can be used to replace the differential shaft seal.

Compatible with BMW E70 E90 E91 E92 X3 X5 X6 RWD 4WD. OEM Equivalent Part Number: 335040, 335050, 335060, 335080, 230020.

Durable to use. Made of high quality steel, with high hardness, not easy to break and deform.

Function: Yuesstloo camshaft alignment tool kit is used to align the engine camshaft and crankshaft position perfectly, and correct into the side cover.

Fitment: Compatible with Volvo B4204 engine (8-Speed Transmission), compatible with Volvo 2.0T S60 S80 V60 V70 XC60 XC70 XC80.

OEM Equivalent Part Number: 9997490, 9997493, 9997495, 9997496, 9997497.

Yuesstloo ball joint tool kit is for quick and easy removing the ball joint connections, removing tie rod ends, steering knuckles and lower control arms to replace a ball joint. Make separate ball joints easier.

Compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. Compatible with Mercedes Benz W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Land Rover Audi A4 A6 lower suspension ball joint.

Made of heavy duty carbon steel, with high strength and high hardness, durable to use, not easy to break. The jaw capacity range is adjustable, from 30mm to 56mm, allowing it to be configured for various stud lengths. Add a little oil to the screw before use to make the ball joint easier to eject from the steering knuckle, better protect the thread.

Easy to Use: The swivel spark plug socket features 360-degree swivel action for maximum flexibility. Changing spark plug in the tight area easily. We have improved our product. The appearance may be different from the picture, but the function is the same.

Effectively Retain & Protect Spark Plug: With powerful interior magnets for easier installation and removal, ensures no more plugs drop into the engine compartment. The top could attract spark plugs, not easy to loose, minimizes damage.

Application: Compatible with Benz; Compatible with BMW 1 Series (E81/E87-N43B), 3 Series (E90-N43B) and 5 Series (E60-N43B); Compatible with MINI R55, R56, R57, R60, etc.

Yuesstloo Valve Spring Installer Removal Tool is for easy removal and installation of the pressure spring for the intermediate levers, installing and disassembling the cylinder head on the engine without damage. Make the job convenient and safe.

The valve pressure spring tool is compatible with BMW N13 N20 N26 N51 N52 N55 engines. Compatible with 2011-2013 BMW-135i, 2013-2013 BMW-135is, 2006-2006 BMW-325i, 2006-2006 BMW-325xi, 2006-2011 BMW-330i, 2006-2011 BMW-330xi, 2013-2014 BMW-X1 xDrive 35i.

Made of high-quality steel, high-precision matching, worked as well as the OEM tool, durable to use, rustproof, corrosion-resistant. Replace part number: 117110.

Application: Compatible with Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018; Compatible with Land Rover Discovery 4/ Discovery; Compatible with Range Rover/ Range Rover Sport 2009 - 2018.

OEM Equivalent Part Number: 303-1437; 303-1438; 303-1439; 303-1440; 303-1441. Engine Code: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN.

Function: Used to remove and install the cramkshaft bolt on Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. Make your job easier, remove and install crankshaft damper without damage.

Yuesstloo Engine Camshaft Timing Locking Tool Kit is used to check and lock the camshaft of petrol injection engines. Help you align camshafts, set crank sensor and balancer, adjust crankshaft in the correct TDC position. Simplify engine work and complete work correctly and efficiently.

The timing tool compatible with Jaguar Land Rover Evoque Ford Mondeo 2.0T Engine. Works for 2.0L Duratec-HE (MI4) Petrol, 2.0L EcoBoost GTDI (MI4) Petrol, 2.0L ST EcoBoost GTDI - (MI4) Petrol, Focus (2011.2), Galaxy (2006.5), Mondeo (2007.5).

Replace OEM Equivalent Part Number: 303-1600; 303-748; 303-1594; 303-1595; 303-1521; 303-1504. Works on the engine code: TNWA, TNWB, TPWA, TNBA, MGDA, XQDA.

Meets or exceeds all original equipment specifications

Application specific, providing unsurpassed quality for a seal you can trust

Validated for fit, form, and function

Improved clearance and reach to work on more frame/derailleur hanger combos, including low clearance thru axle derailleur hangers

Updated with tighter tolerances for improved accuracy

Adjusts to fit 20" to 29"+ wheels

Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage.

Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle.

Works great on Delphi two tab connectors and some import vehicles.

Practical: The ABN Belt Tension Gauge helps to set accurate vehicle belt tension

Versatile: Works with all belt drive models with a 10-pound specification

Scale: This gauge includes a scale for easy measurement

👍【Game Changer For Shirt Making】Vowlove tshirt alignment ruler tool makes placing your heat transfer vinyl and sublimation easier & much more consistent. Simply line it to the collar of the shirt to center your design before pressing. No more eye balling it, saving you hours of repositioning and second guessing.

📏【Upgraded Sturdy Soft Ruler】Made of premium PVC material, our t shirt ruler for vinyl alignment are very durable. They can be twisted at will and can be reused, so you never have to worry about them being as easy to break as acrylic resin!! Small size and light weight, easy to carry.

👀【Clear and Visible】Vowlove perfect tee ruler have advanced UV printed graduated numbers and marks that are clearly visible on the ruler guide and are easy to read against almost any shirt color. Measurement has made easier by inch marks on both side of this shirt measurement tool for vinyl set.

Use this toolaccurately position and align hold your Ford 3.5L & 3.7L camshaftTDCperform service.

Helps ensure Camshaft alignment during removal and installationthe timing chain.

Vehicle Fitment:20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, MKX 20112012 4.0L F-150, MKX, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L MKS, MKT 20092014 3.7L MKS 20102014 3.7L MKT 20072012 3.5L MKX, MKZ 20132014 3.7L MKZ 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X

Timing cover gasket for Chrysler Aspen Dodge Durango Dakota Nitro Ram 1500 Commander Grand Cherokee Liberty Mitsubishi Raider 3.7L 4.7L

OE Part Number: TCS30400, SL1000,TCS46000, TCS46022

Donepart Timing Cover Gasket Set Utilizing the latest Advanced manufacturing technology, the head gasket kit is manufactured using precision tooling to make sure all parts meet Original Equipment (OE) specifications for correct fit and performance.

Checking Compression On Petrol Engine Quickly And Accurately

Easy Pressure Release Button On Side Of Tester

Completed Kit Comes With Adapters For Most Applications

Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It's ideal for garage, workshop, and agricultural jobs

Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations

Features (4) 14" length chains, each equipped with an L-bracket assembly

Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly

Made from premium, high carbon steel

Straight and true, tip and taper are precisely machined to meet exacting tolerances