Best Z Ztdm Leramed in 2026

3 SHELVES FOR STORAGE & CONSIDERABLE OPENED DESIGN: It features with 3-level shelves that can provide space for storing the tools and equipment. And the opened design enables you to make the collection and assembly easily.

TWO SIDE HOOKS AND TWO SAFETY CHAINS: This cart has two hooks on top tiers to hang or roll the cables while using. And it also has two chains to secure the gas cylinder that you can use with no problem.

MANEUVERABLE AND MULTI-DIRECTIONAL WHEELS: Equipped with two 360 degree tough front caster wheels that you can turn the direction as easy and flexible. While the two large rubber rear wheels add the stability of the cart. And you can handle it with the top handle without a struggle.

MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work with a variety of metals. Features an 50Hz/60Hz input power frequency and 85% power efficiency.

VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.

UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The safe and user-friendly plasma cutter doesn’t use flammable constituents, reducing exposure to risks.

★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.

PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.

PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.

MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum

★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).

★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.

Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life

High-quality components and advanced inverter technology increase product life and work efficiency by 30% compared to ordinary machines, resulting in a smooth cutting surface and permanent supply of high-quality consumables.

Compact and portable design with an LCD digital display and a portable handle for easy operation and transportation. Long-term supply of consumables.

Dual voltage capability allows for automatic adaptation to switch input power of 90V-260V (110V-220V) without the need for an external conversion plug, making it easy to use in different environments.

3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit. Includes 50A plasma cutter, 200A TIG welder and 200A stick welder (plus aluminum stick welding).

TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function. Features 110/220VAC (50Hz/60Hz) Pilot arc cutting and 1/2" clean cut or 1/4" TIG and stick welding.

PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%; Input power frequency: 50/60Hz. Plus, IGBT inverter technology makes the transformer lighter/smaller.

Pilot Arc Function, This is 50Amps plasma cutter With Pilot Arc Function, 110/220V dual voltage plasma cutting machine, It is IGBT air inverter technology 50/60Hz, severance max cutting thickness is 14mm, quality cutting thickness is 10mm, this plasma cutter is high frequency no need to touch metal get arc starting.

Dual Voltage 110/220V, This pilot arc plasma cutter designed under 110/220V, auto indicate 110 and 220v, hand switch is not required on machine. There are two lights of voltage at front of panel, 110V lighting when connect machine to power 110V, LED 220V will lighting up when connect machine to power 220V, In this case the user easy knows the voltage.

Cutting Thickness, this pilot arc plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#70PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#70PSI 220V 50Amps; Under 110V 35Amps, the quality cutting thickness is 6mm#65PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for plasma cutting machine, 50Amps in 220V, 35Amps in 110V. for cut copper, 2-4mm#60PSI(0.6Mps)220V 50Amps is suggested.

★ CUT THICKNESS: Ideal Cut: 1" Inch; Maximum: 1 1/2" Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. ★ INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.

★NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. ★ 2T/4T ENABLED: Release your finger for long time cut★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000D Plasma Cutter are: BCON40 and BCON90. Please search "Lotos BCON40" or "BCON90"

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

[IGBT inverter system]: Plasma cutter is blow back cutting machine with 50/60Hz IGBT inverter. Low frequency plasma cutting machine has low electromagnetic interference, higher cutting success rate, no interference to the power supply, and is very safe to the home power grid.

[Operating voltages and air pressure]: BTC450NP supports 110/220v dual voltage, the front panel automatically detects and displays voltage. Equipped with 110v to 220v voltage conversion line. When connecting 110V, the recommended psi is between 20-40psi. When 220V is connected, the recommended psi is between 30-60psi.

[Maximum cutting thickness]: When BTC450NP is connected with 220v, 45A@60% duty cycle, its maximum cutting thickness can be up to 14mm, clean cutting thickness is 10mm. Very suitable for cutting thin metal, automobile steel, frame, steel door, etc.

Pilot Arc Plasma cutter :50Amps Plasma cutter with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality electronic power components, This machine adopt latest IGBT Advanced inverter soft switch technology, Nice cutting surface at 12mm thick, Machine come with high quality consumables

Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting thickness in 240v@60PSI 50A; Under 120V, it is 35Amps. Quality cutting thickness is 12mm, Severance cutting thickness 12mm in 120V@60PSI 35Amps

Plasma cutter with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables

【Non -Touch Cut-50 Plasma Cutter】This plasma cutter can effectively cut rough, painted, rusted metal with less dross. Cutting without touching the metal results in better cutting quality and longer product life. Arc ignition technology allows you to cut without touching the tip to the metal, for better cut quality and longer consumable life.

【Output & Performance】Voltage: 110/220V, 60HZ, 4.8KVA; Main fuse: 16/22A; Current rage: 20-50A; No-load voltage: 230V; Duty cycle: 60%; Efficiency: 85%; Insulation class: F; Protection class: IP21S; Max cutting thickness:1/2" (Cuts like a hot knife through butter).

【Safety Design】Built-in over-heat protection, over-voltage protection, under voltage protection. Comes with a mask to prevent you from getting hurt while using it. Compact plasma cutting machine, equipped with portable handle, it is very convenient to operate and carry.

👉Pilot Arc Plasma Cutter Dual Voltage 110/220V, HYC550XP is Full digital High Frequency Pilot Arc Plasma Cutter, 55Amps cutting current with 60% duty cycle, IGBT inverter digital plasma technology, 220V 55Amps 110V 35Amps Cutting Current, Max Cutting Thickness 16mm@55A 220V 70PSI, Clean cutting thickness 14mm@55A 220V 70PSI, 10mm Clean Cutting thickness under 110V 60PSI

👉Input Power AC110/220V±15%, The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V. 63A power breaker and 10 Gallon Air compressor is suggested. Machine come with 2 meters power cable with 110V power plug, NPT 1/4G quick air connector supplied with machine.

👉Digital Plasma Cutter, This cutter machine is full digital Inverter Igbt plasma cutter, with digital air gauge, post time and current display. The digital gauge will show accurate air pressure, Machine will give warning if the air pressure low or high. Also machine with error code show different problem through the code. The user can easy read the code find the problem for quick service. Fan will work only after machine getting hot and the LED will lighting up on panel.

The pilot arc plasma cutter adopts a 50/60Hz high-frequency start and can arc without touching metal. 110/220V dual voltage digital display automatically identifies input current and voltage.

Plasma cutter at 220V 55A 60% Duty Cycle, the maximum cutting thickness is 16mm, and the quality cutting thickness is 12mm. Suitable for stainless steel, alloy steel, mild steel, and copper.

Plasma cutting machine built-in post flow, 2-15s time can be adjusted. Stop cutting and then cool plasma cutting torch consumables, dial display adjustment time, prolonged consumables life.

【3 IN 1 Multi-Function】Plasma cutter welder combo machine has 50Amps plasma cutting, 200Amps TIG and 200Amps MIG (MMA, Stick) functions. The current of the plasma cutter welding machine can meet most of the working requirements and is suitable for use in various environments.

【50Amps Plasma Cutter】CTS520X is 110/220V auto dual voltage plasma cutting machine, It is inverter technology 50/60Hz high frequency arc starting, 14mm max cutting thickness, quality cutting thickness is 10mm at 220V. The plasma cutting machine is high frequency need to touch metal get arc starting.

【Tig Welder】200AMP DC TIG current output. High-frequency arc ignition technology makes the welding of thin metal plates easier and the welding shape more beautiful. Tig welder can be used with foot switch and digital torch to control current (this accessory is not included with the product).

[NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

[BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.

[POWERFUL CUTTING ABILITY] 10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

🛒[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)【30A breaker suggested for220V,50A breaker suggested for 110V】

🛒[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2"(12mm). Max Severance Thickness: 3/4"(16mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.

🛒[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty

PILOT AIR PLASMA CUTTER: Suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. It is high frequency arc starting plasma cutter. Uses non-hazardous compressed air to cut, safe and at low cost.We offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty.

NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 5/8” maximum severance cut under 220/240V. 10-35A DC output, 2/5" ideal clean cut and 1/2" maximum severance cut under 110/120V.

【Rugged Iron Construction】The sturdy and durable welding cart is all-iron construction with satin black powder coated finish that is rust proof and wear proof for years of use!Heavy duty with a total load capacity of up to 180lb which is enough to hold your welders plus plasma cutter on the same welding cart,also accommodate gas bottle,tidy up your work space,help you find your welding accessories and tools right away!Suitable for a quick welding job or a big project at home garage & workshop

【3 Shelves for Easy Access and Storage】The welder cart featured with 3-level shelves that provides ample storage space to organize your welding tools and equipments,help you built a neat and ordered garage or workshop!Spacing between each shelf is convenient and easy to access whatever tools you need!The top shelf accommodates most welders and plasma cutters.The middle and bottom shelves allow storage of necessary welding accessories,such as welding helmet,welectric drill,welder wire,etc.

【Cylinder Rack w/Safety Chain】The 3 tiers welder cart is equipped with a spacious rear shelf for storing shielding gas bottle up to 9.6in diameter,comes with an extended chain to keep tank securely in place,add more stability and safety!Cut out in rear to allow plasma cutter cable routing through the rear of the cart!Designed with 2 side heavy-duty hanging hooks for cable storage!Equipped with a tilted handle that is ergonomically designed for easy maneuverability around the workshop

【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.

【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.

【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).

🔔★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.

🔔★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.

🔔★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual（Air Compressor Start Required）

【Low Cost, High Frequency】 HITBOX plasma cutting machine adopts inverter technical, and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, efficiency is increased by 30%. Improved cooling method for the cutting torch; greatly makes the cutting consumables more endurable. Better cutting quality and longer consumable life.

【55Amp Output & Performance 】The plasma cutter offer a great cutting performance. It will offer 10-50A DC output at 220V - getting 1/2" ideal for clean cuts and 3/4" maximum cut-off cuts. 10-35A DC output at 110V- getting 3/8" ideal for clean cuts and 1/2" maximum cuts.

【Easy to Start】The pre-installed air filter regulator enables a seamless connection to your air compressor using the existing bracket coupler. Ensures a 100% Air Leakage-Free Guarantee.

[HF CUT] The high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition. Ideal Clean Cut 1/4'', Max cut 1/2''.

[AIR COMPRESSOR FILTER] Air compressor filter available as well as air pressure gauge.

[IGBT INVERTER] It adopts IGBT inverter technology, features with current control, high quality and stable performance, suitable to cut stainless steel, alloy steel, mild steel, copper, etc.

Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.

Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.

Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.

🔋 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently Cuts Through Rough, Painted, And Rusty Surfaces And Produces Minimal Slag. Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal. Better Cutting Quality And Longer Consumable Life.

🔋 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded Torch And Consumables Ensure More Precise Cutting And Durability Of Consumable Life. Lower Your Usage Cost. Compact Plasma Cutter Has A Handle For Portability And Use Non-Hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Aluminum.

🔋 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. SUITABLE CUTTING For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost.

Pilot arc plasma cutter - Our PLC55P is pilot arc non-touch cut metals and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; Pilot arc technology effectively protects consumables from corrosion and increases their lifespan.

Upgrade IGBT technology - IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is more stable than the MOSFET machine, can effectively save 30% of energy.

12mm Cutting thickness: Max output current 55A, deal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation.

Non-Touch Pilot Arc: Pilot arc technology allows you to cut without touching the tip of the metal. This plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life. Ideal Clean Cut: 1/2"(12 mm). Maximum Severance Cut: 5/8"(16 mm).

All Safety No Heat: The unique air channel design increases the heat dissipation of the power device. The IGBT inverter will greatly improve the performance of the plasma cutting machine. The outstanding 30%@104 °F, 50A; 60%@104 °F, 33A; 100%@104 °F, 25A duty cycle can also ensure long-time cutting.

50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals. Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services. You'll be prepared to take on any challenge!