Best Lotos Plasma Arc Cutting Equipment in 2026

MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work with a variety of metals. Features an 50Hz/60Hz input power frequency and 85% power efficiency.

VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.

UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The safe and user-friendly plasma cutter doesn’t use flammable constituents, reducing exposure to risks.

★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Use the chart in the pictures to find your plasma cutter and drag shield diameter.

Quick and accurate circle cutting. The stencils are offset to cut the indicated size from the center of the plasma arc, this allows a little clearance for easy assembly.

5 pc. kit includes 10 hole sizes. 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3". The outside radius acts as bonus sizes, add 2" for 380/430 sizes add 2 1/4" for 580 size.

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

✤ Specifications:Digital Plasma Cutter, 110V/220V 50Amp cutting machine with IGBT inverter technology, power 50/60Hz,High frequency pilot arc Non-touch cutting torch

✤ Cutting Thickness:220V,15-55Amps, Max Cutting Thickness 16mm, Clean cutting thickness 12mm,110V,15-40Amps Cutting Current,Max Cutting Thickness 12mm, Clean cutting thickness 8mm,60% duty cycle at 55 amps,100% at 45amp

✤ Easy to Operate:This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current,2T/4T/PT,Post Time Function, Machine with function post time 2-15seconds,When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch,which can greatly extend the working life of consumables

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum

★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).

★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.

Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life

Package Including: 10pcs Electrode + 10pcs Tip + 1pcs Plasma Cutting Shield Cap + 1pcs Plasma Cutting Stand-Off.

Suitable for PT-60 PT60 IPT-60 IPT60 / PT-40 PT40 IPT-40 IPT40 series plasma cutter torch

These plasma cutting torch consumables are replacement parts, not original.

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.

[Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.

[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.

Pilot Arc Function, This is 50Amps plasma cutter With Pilot Arc Function, 110/220V dual voltage plasma cutting machine, It is IGBT air inverter technology 50/60Hz, severance max cutting thickness is 14mm, quality cutting thickness is 10mm, this plasma cutter is high frequency no need to touch metal get arc starting.

Dual Voltage 110/220V, This pilot arc plasma cutter designed under 110/220V, auto indicate 110 and 220v, hand switch is not required on machine. There are two lights of voltage at front of panel, 110V lighting when connect machine to power 110V, LED 220V will lighting up when connect machine to power 220V, In this case the user easy knows the voltage.

Cutting Thickness, this pilot arc plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#70PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#70PSI 220V 50Amps; Under 110V 35Amps, the quality cutting thickness is 6mm#65PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for plasma cutting machine, 50Amps in 220V, 35Amps in 110V. for cut copper, 2-4mm#60PSI(0.6Mps)220V 50Amps is suggested.

★ CUT THICKNESS: Ideal Cut: 1" Inch; Maximum: 1 1/2" Inch. OUPUT: Current 20~80A Duty Cycle @ 40C (104F) 60% @80A & 100% @50A. SUITABLE: For stainless steel, alloy steel, mild steel, copper and aluminum. ★ INPUT: Voltages 210~250V, 1PH, 50/60Hz; Current 200~220V, 1PH, 50A. Recommend Circuit Breaker Size: 60AMP.

★NON-TOUCH PILOT ARC: Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. ★ 2T/4T ENABLED: Release your finger for long time cut★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTP8000D Plasma Cutter are: BCON40 and BCON90. Please search "Lotos BCON40" or "BCON90"

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness 10mm@65PSI 40A 230V

✌ The cutting machine is very good to cut car steel (frame), Very light weight and compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, 2mm thin Copper, 4mm Aluminum, It is High frequency touch metal arc starting.

✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness 8mm@65PSI 40A 230V 45A up Power breaker is suggested.

The pilot arc plasma cutter adopts a 50/60Hz high-frequency start and can arc without touching metal. 110/220V dual voltage digital display automatically identifies input current and voltage.

Plasma cutter at 220V 55A 60% Duty Cycle, the maximum cutting thickness is 16mm, and the quality cutting thickness is 12mm. Suitable for stainless steel, alloy steel, mild steel, and copper.

Plasma cutting machine built-in post flow, 2-15s time can be adjusted. Stop cutting and then cool plasma cutting torch consumables, dial display adjustment time, prolonged consumables life.

Fit P-80 Plasma Cutter Pilot Arc Starting

Two Screw Positioning

Roller Guide Wheel

[NON-TOUCH PILOT ARC] Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

[BUILT-IN POST FLOW] When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.

[POWERFUL CUTTING ABILITY] 10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

🛒[Duty Cycle] Automatic 110/220V AC dual voltage 60% at 50A, 100% at 40A Duty Cycle Pilot Arc Air Plasma Cutter with high frequency inverter( no compressor inside)【30A breaker suggested for220V,50A breaker suggested for 110V】

🛒[Cutting Thickness] On 220V Carbon steel Max Rated Clean Cut Thickness: 1/2"(12mm). Max Severance Thickness: 3/4"(16mm) Under 110V Clean Cut Thickness : 3/8 ‘’(9mm) output current 30A.

🛒[Cutting Material] Stainless steel,Alloy steel,Mild steel,Copper,Cast Iron and Chrome can cut with non touch.We offer 30-Day 100% satisfaction or money back guarantee and 1 Year Limited Warranty

PILOT AIR PLASMA CUTTER: Suitable cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. It is high frequency arc starting plasma cutter. Uses non-hazardous compressed air to cut, safe and at low cost.We offer 30-Day 100% satisfaction or money back guarantee and 1 year limited warranty.

NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 5/8” maximum severance cut under 220/240V. 10-35A DC output, 2/5" ideal clean cut and 1/2" maximum severance cut under 110/120V.

【Rugged Iron Construction】The sturdy and durable welding cart is all-iron construction with satin black powder coated finish that is rust proof and wear proof for years of use!Heavy duty with a total load capacity of up to 180lb which is enough to hold your welders plus plasma cutter on the same welding cart,also accommodate gas bottle,tidy up your work space,help you find your welding accessories and tools right away!Suitable for a quick welding job or a big project at home garage & workshop

【3 Shelves for Easy Access and Storage】The welder cart featured with 3-level shelves that provides ample storage space to organize your welding tools and equipments,help you built a neat and ordered garage or workshop!Spacing between each shelf is convenient and easy to access whatever tools you need!The top shelf accommodates most welders and plasma cutters.The middle and bottom shelves allow storage of necessary welding accessories,such as welding helmet,welectric drill,welder wire,etc.

【Cylinder Rack w/Safety Chain】The 3 tiers welder cart is equipped with a spacious rear shelf for storing shielding gas bottle up to 9.6in diameter,comes with an extended chain to keep tank securely in place,add more stability and safety!Cut out in rear to allow plasma cutter cable routing through the rear of the cart!Designed with 2 side heavy-duty hanging hooks for cable storage!Equipped with a tilted handle that is ergonomically designed for easy maneuverability around the workshop

【EASY TO CUT, POWERFUL PERFORMANCE】Automatic dual-voltage 110/220V. With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.

【EASY TO ASSEMBLE】With a plug-in air filter connector and built-in regulator, help you to get rid of tedious installation anymore. Only takes 30 seconds and you can start cutting.

【PORTABLE & LIGHTWEIGHT】This plasma cutter machine only weighs 13 pounds, easy to carry. It's also tiny and light enough to move with strap in any workplace(strap included).

Heavy Duty MIG/TIG/FLUX Welding Cart

Over All Size: 28-1/2" H x 28" L x 11-1/2" W

Assembling Required

【Low Cost, High Frequency】 HITBOX plasma cutting machine adopts inverter technical, and matureit greatly reduces the dimensions and weight of main transformer, energy saving 50%, efficiency is increased by 30%. Improved cooling method for the cutting torch; greatly makes the cutting consumables more endurable. Better cutting quality and longer consumable life.

【55Amp Output & Performance 】The plasma cutter offer a great cutting performance. It will offer 10-50A DC output at 220V - getting 1/2" ideal for clean cuts and 3/4" maximum cut-off cuts. 10-35A DC output at 110V- getting 3/8" ideal for clean cuts and 1/2" maximum cuts.

【Easy to Start】The pre-installed air filter regulator enables a seamless connection to your air compressor using the existing bracket coupler. Ensures a 100% Air Leakage-Free Guarantee.

Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life.

Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.

Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.

🛡️Heavy-Duty Construction: Made of high-quality metal with full black coating, this welding cart is solid, rust-proof, and can bear up to 220 lbs. of weight.

🛡️3-Tier Design: With 3-level shelves, including a tilted top shelf for easier access to welder controls and a spacious rear shelf with 2 safety chains to secure the gas cylinder, you'll have ample space to store tools and equipment.

🛡️Upgraded Wheels: Equipped with 4 heavy-duty PVC swivel casters, including 2 3-inch caster front wheels that provide 360° of rotation, this cart can move stably and freely without wobble or noise.

【Top Quality】 Tektall plasma cutter guide is made of very solid Anti-High-temperature premium material. Well-Machined, Great Tolerance.

【Fitment】 Brand new aftermarket Cutter Guide Wheel Replace for Panasonic 80A-100A Cutting Torch P-80 Panasonic.

【Specification】 Rated welding current: 100A, Max Cutting thickness: 40mm, Bottem inner diameter: Approx 33.5mm.Top inner diameter: Approx 35.5mm.

【GREAT PERFORMANCE】- This cooling tank is designed for use with TIG welders to provide powerful cooling. It features 1500W high power and two brass ports, which make it more durable.

Powerful Water Pump: Large lift pump will not cause scale due to long-term use; fast heat dissipation, with 1500W rated cooling capacity, it is more durable and powerful.

Water Level Display: Keep you abreast of the water level and the water tank is large enough. In the absence of water supply pipes in the wild, it can meet the needs of different argon arc welding machines.

PT31 Plasma Cutter Torch Consumables Extended Long Tip Electrode -Nozzles,Import Hafnium electrode,Cutting is better

Package included: 10pcs Nozzles 10pcs Electrodes 5pcs Ceramic Cups 5pcs

pt31 plasma cutter torch consumables for 40 50 Amps Cutting Machines

Non-Touch Pilot Arc: Pilot arc technology allows you to cut without touching the tip of the metal. This plasma cutter pilot arc delivers a consistent and precise current to the cutting surface with better cutting quality and longer consumable life. Ideal Clean Cut: 1/2"(12 mm). Maximum Severance Cut: 5/8"(16 mm).

All Safety No Heat: The unique air channel design increases the heat dissipation of the power device. The IGBT inverter will greatly improve the performance of the plasma cutting machine. The outstanding 30%@104 °F, 50A; 60%@104 °F, 33A; 100%@104 °F, 25A duty cycle can also ensure long-time cutting.

50AMP Premium Cutter: Use non-hazardous compressed air to cut aluminum, stainless steel, mild steel, copper, and other metals. Suitable for a wide range of applications, including sheet metal fabrication, light industrial, automotive repair, plumbing work, and other maintenance services. You'll be prepared to take on any challenge!

FITS: Many applications. Please message us with your make/model and current U bolt size if you have any questions about fitment.

CONTENTS: 4x Square U-Bolts (measurements are from inside the bend 8.5" long and 2.5" wide)

INSTALLATION: Bolt on kit. U bolts are 8.5" from the inside bend and just over 9" in overall length.

★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. ★ Non-HF--Non-HF Blowback Start, there is no HF interference.

★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer.

★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min.