Best Bestarc in 2026

[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.

[Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.

[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.

[IGBT inverter system]: Plasma cutter is blow back cutting machine with 50/60Hz IGBT inverter. Low frequency plasma cutting machine has low electromagnetic interference, higher cutting success rate, no interference to the power supply, and is very safe to the home power grid.

[Operating voltages and air pressure]: BTC450NP supports 110/220v dual voltage, the front panel automatically detects and displays voltage. Equipped with 110v to 220v voltage conversion line. When connecting 110V, the recommended psi is between 20-40psi. When 220V is connected, the recommended psi is between 30-60psi.

[Maximum cutting thickness]: When BTC450NP is connected with 220v, 45A@60% duty cycle, its maximum cutting thickness can be up to 14mm, clean cutting thickness is 10mm. Very suitable for cutting thin metal, automobile steel, frame, steel door, etc.

Premium welding training steel

Help you practice welding skills and innovate

Durable, precision machining

Premium welding training steel

Practical gadgets to help you practice and create

Durable, precision machining

Made of high-quality metal aluminum

Premium tool for practicing welding skills and creativity

Durable, precision machining

High strength, high wear resistance and durability

Standard pentagonal welding plate can create DIY welding by itself, or challenge welding it into a spherical shape

Welding coupons are helpful for professionals and beginners to practice, and long-term practice is very helpful for improving welding technology

Made of high quality polycarbonate plastic, more durable than acrylic plates.

The see-through PC plastic allows easy placement of materials for a precise die cut.

Exactly same thickness as original C plates. No extra cardstock or shim is needed to make the sandwich thick enough for a clean cut.

Well Design: Thickened and widened handle, smooth and rounded edges, elegant and modern gold appearance, brings better experience. And the ergonomic handle makes it easier to cut your cake.

Premium Material: Made of high quality stainless steel, no rust, no corrosion, no bending; the standard material can be safer to contact with food. All structures are made of stainless steel.

Good Practicality: The extended knife head and the uniform serrated blades make cutting larger cakes faster. The widened serving panel has enough space to prevent cake pieces from falling off while moving.

Fit ESAB/L-TEC PT-31 JG-40 and WSD-40 Cutting Torch

10pcs Plasma Tips Nozzle Extended Ref No: 18866L

10pcs Electrode- Extended Ref No:18205L

Use the chart in the pictures to find your plasma cutter and drag shield diameter.

Quick and accurate circle cutting. The stencils are offset to cut the indicated size from the center of the plasma arc, this allows a little clearance for easy assembly.

5 pc. kit includes 10 hole sizes. 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3". The outside radius acts as bonus sizes, add 2" for 380/430 sizes add 2 1/4" for 580 size.

★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work with a variety of metals. Features an 50Hz/60Hz input power frequency and 85% power efficiency.

VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.

UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The safe and user-friendly plasma cutter doesn’t use flammable constituents, reducing exposure to risks.

Every package will include 176655 electrodes 10pcs, and 176656 tips 10pcs

Weldingstop brand aftermarket electrodes 176655 are used hafnium as material in the electrode, NOT cheap version in the plasma market

The miller spectrum 375 consumables can only use on ICE-27C torch, if you owned spectrum 375 plasma cutter machine with XT30C torch, these consumables will cannot compatible with you torch

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.

【Why choose us】 With Storystore Leveling System tile installation-great tools for floor/wall setting.The system ensures flatness between tiles avoiding movements during the mortar setting,Saves tile installation time and money with less effort, it is the best gift for professionals and DIYs who want to install the tile of wall and floor

【100 pcs Tile Wedge】 The wedge allows for a 1/12" minimum grout joint, and it firmly holds the tile in place, This is the most economical tile leveling system available (Notice: Tiles are pushed, not lifted, providing better tile adhesion Improves speed of tile laying)

【300pcs Tile Clips]】 Use on Tiles 1/12" (2mm)up to 1/2"(12mm) thick, No additional assembly tools needed!! extremely fast & easy to install & remove. Can be used for Flooring and Walling

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.

PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.

MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.

100PCS Plasma cutting consumables Common

Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)

Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN

Made in the USA and CANADA using high quality, durable material

Patented T shape Design, making your DIY flooring installation nice and easy.

TFloor Spacers Never Fall, Slip, Tip or Get Stuck, Even if the wall is High. No need for carpet tape, painters tape, or any other fasteners

✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.

✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 10mm,Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!

✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum

★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).

★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.

Can only be used for BROWN Color Lotos LTP5000D and BROWN Color Lotos LTPDC2000D

CANNOT be used for RED Color Lotos LTP5000D & RED Color Lotos LTPDC2000D

Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide

Fit SG-55 AG-60 plasma cutter torch head.

Package include:2 Guide 10 Cup 20 Nozzles 20 Electrodes.

Suit for home DIY jobs and light duty small business projects.

Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life

🔨【1/4 Inch& 1/2 Inch】Different from other triangular spacers, our gaskets are available in 2 sizes, 1/4 inch and 1/2 inch, Meet your needs for larger gaps. and the quantity is 20pc, which is enough for you to use. Let you install your laminate wood flooring more conveniently and easier.

🔨【Newly Spacers on the Market】Flooring Spacers the Perfect addition to your Floor Installation Kit. Big Triangle Design-stability stays in place. Our flooring spacers can install any wood flooring material requiring an expansion gap of 1/4"- 1/2”. Floor Spacers help you to Install your new laminate or hardwood flooring quickly, efficiently, and accurately;

🔨【Stable Triangle Design】The spacers on the market are roughly divided into two types, one is a thin spacer, the other is a triangular spacer, thin spacers that come with the typical installation kits always fall, slip, tip over, and get stuck. But our triangular spacer won't like a thin spacer that requires someone to hold it. You just need to put it on the floor, it won't tilt or fall down randomly.

Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG

Typical parallel crimping type ensures stability and power equality and improves 30% of the crimping-tightness

Double-layer Wire Electrical discharge machining(EDM) Cutting jaw crimps conductor and insulation sheath simultaneously

Package Including: 10pcs Electrode + 10pcs Tip + 1pcs Plasma Cutting Shield Cap + 1pcs Plasma Cutting Stand-Off.

Suitable for PT-60 PT60 IPT-60 IPT60 / PT-40 PT40 IPT-40 IPT40 series plasma cutter torch

These plasma cutting torch consumables are replacement parts, not original.

♥ ♥ HIGH QUALITY ----- Insulated nylon material is strong and light. When you try to reduce weight or need it to be non-conductive, such as isolating or tightening PCB, using carbon fibers, etc., make these components suitable for application.

♥ ♥ VARIOUS SIZES FOR DIFFERENT USE ----- Plastic Round Spacer Assortment Kit, OD 11mm, ID 6.2mm, L 3 to 25mm. Including 3mm, 4mm, 5mm, 8mm, 10mm, 12mm, 15mm, 18mm, 20mm, 25mm standoffs, with enough hex nuts and screws to pair with them, are included for most modules’ secure and gentle mounting.

♥ ♥ GREAT VALUE ----- This item Packed in a plastic box, 100% new, never used, RoHS compliant. A diagram inside the storage box corresponds to the every compartment with labels so you know what size each part is and where to get it in the box.

High-quality components and advanced inverter technology increase product life and work efficiency by 30% compared to ordinary machines, resulting in a smooth cutting surface and permanent supply of high-quality consumables.

Compact and portable design with an LCD digital display and a portable handle for easy operation and transportation. Long-term supply of consumables.

Dual voltage capability allows for automatic adaptation to switch input power of 90V-260V (110V-220V) without the need for an external conversion plug, making it easy to use in different environments.

May not fit all models; Please review

10 pcs Tips 1.2 60Amp

10 pcs Electrodes