Best Herocut in 2026

✤ Specifications:Digital Plasma Cutter, 110V/220V 50Amp cutting machine with IGBT inverter technology, power 50/60Hz,High frequency pilot arc Non-touch cutting torch

✤ Cutting Thickness:220V,15-55Amps, Max Cutting Thickness 16mm, Clean cutting thickness 12mm,110V,15-40Amps Cutting Current,Max Cutting Thickness 12mm, Clean cutting thickness 8mm,60% duty cycle at 55 amps,100% at 45amp

✤ Easy to Operate:This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current,2T/4T/PT,Post Time Function, Machine with function post time 2-15seconds,When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch,which can greatly extend the working life of consumables

✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.

✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 10mm,Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!

✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.

HEROCUT gasless flux core MIG wire is made of Standard AWS E71T-GS mild steel, easy to use, no require for shielding gas

0.035inch, 0.9kg, large quantity, suitable for standby

Single pass and multi pass welding are applicable

[Multiple welding mode]: MTS165D adopts dual-voltage(110/220V) design, which can automatically read and indicate after power-on. Using IGBT inverter technology, it has high output efficiency, good dynamic performance and good load adaptability. The welding machine is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG/2T/4T.

[Synergic Function]: One intelligence control system automatic compensate and adjust current/voltage.10 levels precise adjustment from -5V to +5V, Coordinate control mig wire feeder’s speed and current, which makes the machine easy to heat arc and instantaneous Increase the current convenient for striking the arc.

[Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces and achieve smooth arc. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect. Very friendly for green hand and DIY users.

Plasma Cutter Electrode Tips Nozzle Shield Cup Kit,Plasma Tip Nozzle Electrode Cutting Consumables for torch AG60P SG55 AG60

Nozzles and electrodes are made of high-quality copper material and galvanized processing. Work torch with pilot arc function. Do not fix wire guider if torch without pilot arc function

10pcs Tips 10pcs electrode 2pcs Shield Cup 2 pcs wire guider, Totaltal 24 pcs per bag

Well built, designed with diligence, flexible, anti-skid, heat-resistance handle, high cable toughness, anti folding protect at the connection, convenient for your use and storage

Can be used on SP-85, SP-100, SP-100I, SP-100T, SP-125 Plus, SP-130T, SP-135 Plus, SP-140I, SP-155, SP-170, SP-170I, SP-170T, SP-175 Plus, SP-175T, Handy MIG 170I, MIG Pak 10, MIG Pak 15, Pro 100, Pro 155, Pro-Core 100, Pro-MIG 125, Pro-MIG 175, Weldmark 135 Plus, Weld-Pak 100, Weld-Pak 100HD, Weld-Pak 125, Weld-Pak 155, Weld-Pak 175HD, Weld-Pak 3200HD, Weld-Pak 5000HD

In most case, Lincoln Magnum K533-7 can be used with Power MIG 200, 215, 216, 255, and the Wire Matic 255

1/4 air coupler plug, Industrial Type D 1/4" NPT Quick Connect and easy connect system

Need to work with air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose

Need teflon tape on the connector anti air leak.

HEROCUT 100Amp M-100 MIG gun replacement for Miller M-100 (248282)/M-10 (195605) 10-foot (3m) cable

The integrated design, anti-skid design of the handle and anti folding design at the connection make the service life of the product longer

Light in weight and easily to install. Safe to use on Miller machines

[Dual-voltage Multi-function]: The welding machine adopts dual-voltage design, which can automatically read and indicate after power-on. IGBT inverter technology. MTS165 is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG.

[Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces. By adjusting amperes or choosing different thickness, automatically change the voltage and wire feeding speed. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect.

[Automatic Protection Function]: Automatic voltage and current control, built-in energy-saving fan automatically regulates the temperature and prevents overheating and dust enter.VRD against electric shock design makes welding workers safer.

Fit ESAB/L-TEC PT-31 JG-40 and WSD-40 Cutting Torch

10pcs Plasma Tips Nozzle Extended Ref No: 18866L

10pcs Electrode- Extended Ref No:18205L

100PCS Plasma cutting consumables Common

Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)

Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN

MULTIPURPOSE WELDER AND CUTTER: Cut many metals up to 1/2" thick with the 50A plasma cutting function. The TIG and stick welding settings also work with a variety of metals. Features an 50Hz/60Hz input power frequency and 85% power efficiency.

VERSATILE 3-IN-1 WELDING/CUTTING MACHINE: The 50A plasma cutter is used for cast iron, mild steel, copper, and more. The 200A TIG torch can weld magnesium, and stainless steel. Use the 200A stick welder for minor welding repairs.

UNIQUE MULTIPURPOSE WELDING MACHINE/PLASMA CUTTER IN DESIGN & PERFORMANCE: This 200 Amp welder consumes less energy, lowering the operation cost. The safe and user-friendly plasma cutter doesn’t use flammable constituents, reducing exposure to risks.

★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).

★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Use the chart in the pictures to find your plasma cutter and drag shield diameter.

Quick and accurate circle cutting. The stencils are offset to cut the indicated size from the center of the plasma arc, this allows a little clearance for easy assembly.

5 pc. kit includes 10 hole sizes. 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3". The outside radius acts as bonus sizes, add 2" for 380/430 sizes add 2 1/4" for 580 size.

Every package will include 176655 electrodes 10pcs, and 176656 tips 10pcs

Weldingstop brand aftermarket electrodes 176655 are used hafnium as material in the electrode, NOT cheap version in the plasma market

The miller spectrum 375 consumables can only use on ICE-27C torch, if you owned spectrum 375 plasma cutter machine with XT30C torch, these consumables will cannot compatible with you torch

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.

PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.

PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.

MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

✤ Specifications:Digital Plasma Cutter, 110V/220V 50Amp cutting machine with IGBT inverter technology, power 50/60Hz,High frequency pilot arc Non-touch cutting torch

✤ Cutting Thickness:220V,15-55Amps, Max Cutting Thickness 16mm, Clean cutting thickness 12mm,110V,15-40Amps Cutting Current,Max Cutting Thickness 12mm, Clean cutting thickness 8mm,60% duty cycle at 55 amps,100% at 45amp

✤ Easy to Operate:This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current,2T/4T/PT,Post Time Function, Machine with function post time 2-15seconds,When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch,which can greatly extend the working life of consumables

✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.

✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 10mm,Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!

✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.

★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum

★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).

★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.

Can only be used for BROWN Color Lotos LTP5000D and BROWN Color Lotos LTPDC2000D

CANNOT be used for RED Color Lotos LTP5000D & RED Color Lotos LTPDC2000D

Includes: 10 Nozzles 10 Electrodes 1 Cup 1 Stand Off Guide

Fit ESAB/L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch

40pcs Plasma Tips Nozzle Extended Nickel-plated Ref No: 18866L

30pcs Electrode- Extended Nickel-plated Ref No:18205L

Fit SG-55 AG-60 plasma cutter torch head.

Package include:2 Guide 10 Cup 20 Nozzles 20 Electrodes.

Suit for home DIY jobs and light duty small business projects.

Plasma Cutter, 120V/240V 50A machine with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting

Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A; Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm

Machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumables's working life

Package Including: 10pcs Electrode + 10pcs Tip + 1pcs Plasma Cutting Shield Cap + 1pcs Plasma Cutting Stand-Off.

Suitable for PT-60 PT60 IPT-60 IPT60 / PT-40 PT40 IPT-40 IPT40 series plasma cutter torch

These plasma cutting torch consumables are replacement parts, not original.

High-quality components and advanced inverter technology increase product life and work efficiency by 30% compared to ordinary machines, resulting in a smooth cutting surface and permanent supply of high-quality consumables.

Compact and portable design with an LCD digital display and a portable handle for easy operation and transportation. Long-term supply of consumables.

Dual voltage capability allows for automatic adaptation to switch input power of 90V-260V (110V-220V) without the need for an external conversion plug, making it easy to use in different environments.

These consumables are compatible with: Red color Lotos LT5000D, Red color Lotos CT520D, Red color Lotos LT3200, Red and Brown color Lotos LT3500

Only Compatible with RED Color Lotos LT5000D, CT520D, LT3200, BROWN COLOR: LT3500

NOT Compatible with BROWN Color Lotos LT5000D, CT520D.

Package Including: 10pcs Electrode + 10pcs Tip + 1pcs Shield Cap + 1pcs Spacer Guide + 1pcs Swirl Ring , Plasma Tip Diameter: 0.8mm or 0.031''

100% brand new and high quality Durable and reliable to use, Suit for home DIY jobs and light duty small business projects.

These plasma kits can be suitable for Trafimet?Everlast?Klutch or Chicago Electric series cutter S25-S45 Torch

Fit SG-55 AG-60 WSD-60 plasma cutter torch head.

Package include:5 Guide 5 Cup 10 Nozzles 10 Electrodes.

Suit for home DIY jobs and light duty small business projects.