Best Steel Needle Nose Pliers in 2026

Durable nickel chromium steel construction

ProTouch grips provide extra comfort and reduces hand fatigue

Induction hardened cutting edge stays sharper, longer

Pliers have two layers of insulation to provide protection against electric shock

Durable molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2018 standards for insulated tools

Flame retardant, impact-resistant, bright orange outer coating and clearly marked with the official 1000-volt rating symbol

Professional quality 6" needle nose pliers with five different crimping/grasping areas

Forged, heat-treated cro-moly steel with an invisible spring

soft touch dual density grips.

Right angle, laser heat-treated teeth grip better and last longer

Undercut tongue & groove design won't slip

Permalock fastener eliminates nut and bolt failure

COMFORT AND CONTROL: Multi-zone bi-material grips

INDUCTION HARDENED: Cutting edges stay sharper longer

STRENGTH AND DURABILITY: Drop forged steel

Steel

Country of manufacture: United States

Manufacturer: Channellock

COMBINATION Long Nose Pliers design is sleek, lightweight and includes an additional pipe grip feature

XTREME LEVERAGE TECHNOLOGY (XLT) increases performance and reduces hand fatigue

LASER heat-treated cutting edges perform better and last longer

Features durable nickel chromium steel construction.

The ProTouch grips provide extra comfort and reduce hand fatigue.

Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer.

Insulated Comfort Grip Two-Color Dual Component Handles are 1000 Volt VDE-Tested

Half-Round, Long Jaws with Serrated Gripping Surfaces

Cutting Edges Induction Hardened Approximately 61 HRC will Cut Medium and Hard Wire Maximum Diameter 3.2mm and Hard Wire Maximum Diameter 2.2mm

Long pointed-nose pliers with 1.2mm width for general purpose electronics applications

32mm serrated jaw with precision-ground surfaces provides smooth operation

Flat outside edge eases access to recessed or component-dense areas

DESIGN CONSIDERATIONS: Our 8-Inch Flat Nose Duck Bill Pliers are designed with tough cross cut teeth that are perfect for gripping and bending wire and more! The low profile design makes these Flat Nose Duck Bill Pliers perfect for confined and hard to reach areas.

QUALITY: The high grade special tool steel construction offers superior gripping ability and durability, while the ergonomic handles offer superior support.

APPLICATIONS: These duck bill pliers are perfect for anything from selecting and removing wires in a wiring harness to reaching wires under the dashboard and more. The straight, broad jaw design and cross cut teeth apply even pressure and equal grip in any direction making them perfect for pulling, pushing, and twisting wire without slipping. From electrical work to automotive work these duck bill pliers have you covered!

RIGHT TOOL FOR THE RIGHT JOB: Make consistent loops and bends on each one of your jewelry pieces with our chain-nose pliers! With a spring-joint construction and ergonomic handles, these pliers won't wear out your hands as you clamp down.

PROFESSIONAL QUALITY: Created from a premium European design and made using the highest standards, this chain nose plier measures 6 inches (152mm). Featuring high-quality hardened steel jaws and comfortable vinyl handles, this tool can be used on most bendable wires that are used for DIY jewelry projects.

ULTIMATE COMFORT: This set of ergonomic pliers has easy-grip handles, needle-nose jaws, and a box joint construction. All these features allow for comfortable use and precision in all your beading, jewelry, and DIY crafting projects. Now you can create matching friendship charms, a pair of earrings, or a beautiful necklace.

Application: Compact Precision Needle Nose Pliers for high detail, delicate, intricate, no marring, precision use. Excellent for work in narrow spaces, electronics, circuit boards, and other small components.

Unlike other precision pliers, our half-round, non-serrated smooth jaws have a tight and close fit to the very tip of the jaw for picking up and holding small object with damage.

Made in Japan from Japanese S58C Carbon Steel (HRC58±4). These pliers are small but strong and wont bend with pressure. ROHS compliant.

high quality compact, fine needle nose pliers with half round, non-serrated jaws

ideal for forming, precision PCB/electronics work, lab/science work, crafts etc.

ESD safe comfort grips, constructed from oil resistant thermoplastic elastomer

Handle Material: Alloy Steel

Includes 1-pc. long nose pliers: 8 in.; 1-pc. diagonal cutting pliers: 7 in.; 1-pc. linemans pliers: 9-1/2 in.; 2-pc. slip joint pliers: 6-1/2, 8 in.; 1-pc. groove joint pliers: 10 in.

Diagonal cutting pliers with induction-hardened blades cleanly snip copper, aluminum, and soft steel wire in solid, stranded, and braided forms

Strong, stout long nose pliers with crosscut teeth have thick jaws that taper to a fine tip just at the nose to prevent twisting

Specifically designed to fit into more constricting spaces to remove smaller stuck nuts, bolts and screws, including tamper-proof and specialty screws, such as Torx Screws

Designed to handle hardware between 0.08" to 0.13" in diameter for the top jaws and 0.14" to 0.21" in diameter for the side jaws

ESD Safe handles made of thermoplastic ergonomic elastomer for unmatched comfort and oil resistance

VamPLIERS, made in Japan from high quality carbon Kobe Steel 7.5" Long Nose Specialty Screw Extraction Pliers, removes stripped/rusted/corroded/stuck/one-side/security/Torx screws, nuts and bolts

Designed with VamPLIERS Technology. Horizontal & vertical serrated teeth at the tip of the jaws, grips and extracts stripped screws/fasteners with ease using the top jaw or the side jaw.

Professional grade pliers with inter-meshed teeth provide non-slip grip

Co-molded grips for added comfort

Compound leverage design increases cutting and gripping pressure by 50%

Chrome vanadium steel for increased durability

Facilitates the building of 3D Museum Quality Models from Steel Sheets

1 x Clipper, 1 x Flat Nose Pliers, 1 x Needle Nose Pliers

Fascinations presents their 3 peice Metal Earth Tool Kit, perfect for helping to create your 3D Metal Earth model.

Jewelry Making Supplies: Package comes with set of 3 jewelry pliers including needle nose pliers, round nose pliers and wire cutters. Professional jewelry tools for jewelry making, jewelry repair, wire wrapping, beading and other DIY crafts

Premium Jewelry Making Tools: These jewelry making pliers are made of high-quality steel that are sturdy and rust proof for long time use. The jewelry plier with smooth polished surface and non-slip handles that are designed for jewelry making and repair. no worry about scratch or leave marks on your jewelry

Chain Nose Pliers for Jewelry Making: The chain nose pliers also called needle nose pliers or snipe nose pliers, are a great universal versatile plier that has long, tapering jaws without teeth that is smooth and pointed. They can reach into tight places that are inaccessible to other types of pliers. The needle nose pliers are perfect for gripping, bending, crimping, opening and closing jump rings, holding small items and shaping wire

4 PC 11" Long Nose Plier Set

Set Includes: Straight, 45 Degree, 90 Degree & "S"

High Carbon Steel Drop Forged Harden Teeth

🤠【Premium Material】The Pliers body is made of high-quality CR-V steel, with overall heat treatment, higher hardness and long lifetime

🤠【Production Technology】Twice heat treatment of the cutting edge, harder, cutting edge CNC processing, thinner, labor saving 30%, more convenient to use

🤠【Comfortable Handle】TPR handle, non-slip and wear-resistant. The widened handle design makes the grip more comfortable. Can be easily opened with one hand, easy to use

Jewelry Making Tools – Acejoz jewelry making supplies kit includes 6 pairs of jewelry pliers in different types with a zipper punch. The jewelry pliers set lists as needle nose pliers, round nose pliers, wire cutters, bent nose pliers, crimping pliers and end nippers

High Quality Jewelry Tools – This jewelry making tools kit are made of hard steel that are sturdy for long time use. The pliers for jewelry making with smooth polished surface that are designed for jewelry making and repair. No worry about scratch or leave marks on your jewelry

Professional Craft Pliers Kit – The wire jewelry making tools round up all the basic function for jewelry making and beading craft, suitable for both beginner and professional

[Curved jaws] versatile needle-nose locking jaws provide a secure grip and feature integrated wire Cutters

[Superior grip] induction-hardened angled teeth give tradesmen increased gripping power on any surface

[Professional strength] chrome molybdenum alloy steel body has the strength and durability for professional challenges

A Great Addition to Your Toolbox: The precision pliers set includes 4-inch mini diagonal, 4-inch mini end cutting, 5-inch mini linesman, 5-inch mini long nose, 5-inch mini bent nose and 6-Inch mini needle nose. These precision pliers are the perfect size for detailed projects.

High Quality Material: Made from drop forged carbon steel with nickel coating for rust protection, reducing corrosion and increasing tool life, these pliers are designed to last. Hardened jaws and high frequency cutting edge make the pliers sharper and more durable.

Ergonomic Comfort Grip: The mini pliers feature bi-material TPR handles for comfortable soft grip and less hand fatigue during long-time use. The anti-slip design allows for precise control of the pliers tool set.

Designed for work in hard-to-reach places

Laser heat-treated cutting edges last longer

High carbon alloy steel for superior performance

WM 6" BIMATLONGNOSE

WM 6" BIMATLONGNOSE

WM 6" BIMATLONGNOSE

High-Leverage 10" Length

Durable Hardened Steel Construction

Textured Handles For Sure Control

【USAGE】 Long reach design combined with the compact size makes the duckbill pliers ideal for use in confined areas. The flat smooth jaws can be used for grasping and bending. A must-have tool set for automotive work, mechanics work, jewelry making, art and craft, and other hobby work.

【DESIGN】 High leverage design for maximum gripping strength. Heat treated joint rivet for smooth and consistent operation. Bi-color TPR handles for anti-slip and comfort grip. The double leaf spring action reduces hand and wrist fatigue for easy one-handed operation.

【DIMENSION】 (160 x 52 x 14.5)mm / (L x W x H). (Some oil on the surface to keep pliers free of rust, it will not affect the performance just wipe it clean with a rag or old towel.)