Best Klein Tools in 2026

Multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes

INCLUDES: non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted

Compact design features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

Electronics Screwdriver with four different non-magnetic tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) Slotted tips

Rotating cap for optimum and precise control

Corrosion-resistant chrome plated barrel that includes two double-ended bits that exceed ANSI standards

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes

Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, 1 and 2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and 1 and 2 square recess

Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle

Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561)

11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes

11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess

EASY POCKET STORAGE with concealable tips and a pocket clip (Cat. No. 32614)

MULTIPLE TIPS in one tool (#0 and #00 Phillips) (1/8-Inch and 3/32-Inch slotted tips)

OPTIMUM AND PRECISE CONTROL with rotating cap

DIGITAL CIRCUIT BREAKER FINDER for a panel corresponding to the circuit to which an electrical outlet or fixture is connected

GFCI OUTLET TESTER includes a transmitter connected to the electrical outlet or fixture and a receiver to locate the correct breaker

VISUAL AND AUDIBLE INDICATORS are delivered when the correct breaker has been located

Lineman's Pliers cut ACSR, screws, nails and most hardened wire

High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs

Induction hardened cutting knives for long life

Crimper crimps 10 to 22 AWG insulated and non-insulated terminals

Cutting and Crimping Tool has specially hardened wire cutter in nose

Tapered nose design for working in confined spaces

Screwdriver Set is a general purpose selection of the most frequently used screwdrivers and a Magnetizer/Demagnetizer

Includes a 3/16-and 5/16-Inch Cabinet tip (Cat. Nos. 600-1 and 601-3), 1/4- and 5/16-Inch Keystone tips (Cat. Nos. 600-4 and 602-6), 1, 2, 3 Phillips tips (Cat. Nos. 603-1, 603-3, 603-4. and 603-6)

Tip-Ident quickly identifies the screwdriver type and tip orientation

Circuit Breaker Tool Kit can help quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected

Digital Circuit Breaker Finder with GFCI Outlet Tester (Cat. No. ET310) receiver delivers clear visual and audible indications when the correct breaker has been located

Operates on 90-120V AC circuits

Lineman's Pliers with hinge opening holds and cleans 5/8-Inch (16 mm) pole line and hardware bolts or threaded rods

Cuts ACSR, screws, nails, and most hardened wire

High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs

Level with patented magnet track prevents powerful Rare-Earth magnets from falling out

Thumb screw attaches level to conduit to measure angle while bending

Large, easy-to-read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected

GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker

Receiver delivers clear visual and audible indications when the correct breaker has been located

Screwdriver and Nut Driver 16-Piece Tool Kit provides a combition of 15 screwdrivers and nut drivers and a magnetizer to magnetize and demagnetize the tips of most screwdrivers

Screwdriver Set Plus Magnetizer, 8-Piece (Cat. No. 85148) is a general purpose selection of the most frequently used screwdrivers and a Magnetizer / Demagnetizer

Includes a 3/16-Inch and 5/16-Inch Cabinet tip (Cat. Nos. 600-1 and 601-3), 1/4-Inch and 5/16-Inch Keystone tips (Cat. Nos. 600-4 and 602-6), #1, #2, #3 Phillips tips (Cat. Nos. 603-1, 603-3, 603-4. and 603-6)

39 BITS FOR ELECTRONICS and Apple products 39 bit precision screwdriver set provides everything you need to work with electronics and precision fasteners. Including repair of most Apple products such as the Apple iPhone, MacBook, and Watch

POWERFUL MAGNETS for solid connections - electronic screwdriver bit set houses powerful magnets in the barrel to better secure the bits. The strong magnets easily pick-up and hold fasteners

EXTENDED REACH SCREWDRIVER: reversible barrel is standard on one side and extra-long on the other for hard-to-reach jobs. The 39 industrial-strength heat treated bits in the tiny screwdriver set are also extra-long for easier handling and access

Suitable for users from the apprentice to the demanding professional

Cushion-Grip handle resists slippage and provides the comfort needed for frequent use

Bottle cap Tip-Ident, allows for quick identification in tool pouches or crowded drawers

Screwdriver Set is a general purpose selection of the most frequently used screwdrivers

Includes a 3/16-Inch Cabinet tip, 1/4-Inch and 5/16-Inch Keystone tips (Cat. Nos. 601-3, 600-4 and 600-6), #1, #2, #3 Phillips tips (Cat. Nos. 603-3, 603-4. and 603-6), and a Magnetizer/Demagnetizer

Tip-Ident quickly identifies the screwdriver type and tip orientation

Pliers have two layers of insulation to provide protection against electric shock

Durable molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2018 standards for insulated tools

Flame retardant, impact-resistant, bright orange outer coating and clearly marked with the official 1000-volt rating symbol

Needle Nose Pliers are individually tested Insulation that exceeds the IEC 60900 and ASTM F1505 standards, and clearly marked with the official 1000-volt rating symbol

Two layers of insulation provide protection against electric shock

Long nose easily grabs and twists wire

Pliers with induction-hardened cutting knives for long life

Knurled jaws for sure wrapping and looping

Slim head design for working in confined areas

Precision-machined tip provides accurate fit and torque without slippage

Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance

Tip-Ident quickly identifies the screwdriver type and tip orientation

Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation with white underlayer that provides a warning sign when insulation may be compromised

Side-cutting knives at hinge

Induction hardened cutting knives for long life

Cutting and Crimping Tool designed to crimp insulated and non-insulated 10 to 22 AWG solderless terminals and connectors

Crimper features tapered nose design for working in confined spaces

Contoured thumb area for additional comfort and positive feel and specially hardened cutter in the nose

Diagonal Cutters with glow in the dark grips to easily locate your tool in dark or low lit areas

Plier grips charge in natural and artificial lighting

Angled head design for easy work in confined areas

Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation with white underlayer that provides a warning sign when insulation may be compromised

Side-cutting knives at hinge

Induction hardened cutting knives for long life

1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends; Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back)

Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends

Wide foot pedal provides excellent stability, leverage, and comfort

Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation with white underlayer that provides a warning sign when insulation may be compromised

Induction hardened cutting knives for long life

Knurled jaws for sure wrapping and looping

PRECISION MACHINED 5/16-Inch Cabinet tip for exact fit with fasteners

1000V RATED INSULATED DRIVER features a layer of bright orange impact and flame resistant insulation to protect from electrical shock

MADE IN USA

1000V Rated for safety

Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools

Custom US-made tool steel