Best Kaiweets Clamp Meters in 2026

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

CL120 Clamp Meter measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads

Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated

RT210 detects the most common wiring problems in standard and GFCI receptacles

Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms

True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform

Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current

The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform

Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits

Connect your meter to your smartphone with Fluke Connect Measurements

Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks

Record results directly to your phone and the cloud

200 dc current measurements to measure flame rod

Extended resistance range to measure thermistors up to 60k

Capture flue gas temperature

Compact: Small enough to fit in a work bag. It goes where you go.

For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302-Plus delivers reliable measurements time after time.

CAT III safety rated, and tough enough to withstand daily use. Won’t let you down on your job.

Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues

Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces

Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package

Ultra-portable tools for advance electricians, true rms response for ac current

100A AC and DC current measurement with 1mA resolution, V.F.C function for measuring signal at varia

600V ac and dc voltage measurement, resistance, diode, continuity and capacitance functions

Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests

Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit

Additional Features: data hold, max reading, and an easy-to-read large LCD

Connect your meter to your smartphone with fluke connect measurements

Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks

Record results directly to your phone and the cloud

EASY-TO-READ INDICATOR: Non-contact voltage indicator (40-600VAC) with clean, simple indication for easy and accurate readings. Features a vibration mode to verify AC voltage.

ERGONOMIC CLAMP METER: Designed with an ergonomic hourglass shape for a secure, comfortable grip. Compact clamp head for easy use even in tight spaces.

AUTO SHUT OFF: Convenient low battery indicator and auto power off so that you can ensure your clamp meter is always charged and ready to use. To extend the life of your battery, the meter automatically turns off after approximately 60 minutes.

Mid-size clamp meter has every parameter for electrical and thermal HVACR testing in one meter

One of the most durable clamp meters in the industry that gives higher accuracy VAC & AAC readings on VFD with True RMS sensing technology

Ranges include temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR

Multi -Function T-RMS clampmeter that accurately measures linear or non-linear loads: can measure AC and DC current, AC and DC voltage, Low impedance, Continuity/Resistance/Capacitance, Temperature, Frequency, and Duty Cycle; Easy to use and operate.

Non-Contact Voltage (NCV) Detection: check if a conductor being measured carries a voltage higher than 90V AC without touching any wires; NCV sensor is at the tip of the clamp, press NCV to display EF, bring the sensor close to the conductor under test

Features: LCD display, low battery detection, overload protection, auto power off after 15 minutes, flashlight. Meets IEC safety standard 61010-1 with the CAT III 600V overvoltage protection standard

VFC, low pass filter

NCV testing

Ergonomic and lightweight

►Multiple Compatibility -- This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester & KAIWEETS Digital Clamp Meter HT208A/HT208D.

►Super Materials -- Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.

►Excellent Protection -- It is specially designed with the molded compartments that keep Fluke electrical testers and accessories better organized, and there is an adhesive strap in the middle to better fixed your tester. It protects your device from shock, damage, dust and wet!

The voltage is measured at 600V and has a high-voltage frequency measurement function of 10Hz to 10KHz

The NCV electric field detection has an audible and visual alarm

UT202+ is equipped with a capacitor (4mF), temperature measurement function

Auto-ranging Meter: Automatic select the appropriate decimal point place due to auto-ranngig function, suitable for 600A AC Current, AC/DC Voltage(600V), ,Duty Cycle, Diode,Temperature, (200Ω-20MΩ) Resistance Measurement.

Clamp Meter with NCV: Up to 28mm clamp jaw measures AC current without interrupting the circuit, safer to use; NCV detects the existence of AC voltage to troubleshoot electrical problems safely.

Continuity Test & Overload Protection: Designed to safely and accurately confirm the circuit with low voltage indication and overload protection. Light alarms if detects AC Voltage (90V-1000V) or live wire. Shows "OL" on LCD screen if overload.

🛠️ INDUSTRIAL GRADE: The DL389B is a commercial grade clamp meter with enhanced capabilities for every industrial setting. Our clamp meter measures AC Amps, AC/DC Volts, AC/DC Microamps 2000µA, Capacitance 4000µF, Frequency 199.9KHz, Diode Testing, Duty Cycle, Temperature, Continuity, and Resistance 40MΩ.

📈 TRUE RMS: This industrial clamp meter features True RMS providing accurate measurements on any type of load.

🦺 ENHANCED SAFETY: The DL389B provides increased safety with a CAT IV 300V & CAT III 600V safety rating. This clamp meter includes Non-Contact Voltage to identify live lines. There are input jack locks to protect your meter from blowing a fuse.

Probe-style replacement test leads for the Ideal Industries 61-090 and 61-092 voltage testers and 61-702 and 61-704 clamp meters

Test leads are color-coded—one red and one black—for different testing applications

Silicone-insulated for flexibility and resistance to heat and cold

Power circuit measurement and malfunction analysis

Motor drive of frequency converter (or other electronics) measurement

Power electronics equipment measurement

[High Performance] AVID POWER auto-ranging 6000 counts digital clamp multimeter is ideal for accurate measurement of AC/DC voltage, AC/DC current, continuity, frequency, resistance, capacitance, diode, duty cycle, temperature and battery checking. This clamp multimeter is a must-have for home improvement, industrial, lab factories, automotive and household electrical problems.

[Multifunction] This AMP clamp meter features NCV testing and detecting function with backlight alarm, Auto power off, Low battery indication, Data retention, Max/Min data, 6000 counts Auto-Ranging. Top built-in LED light also provides extra illumination for the work area. When the voltage you measured is > 80V, the current > 3A, the LCD screen backlight turns orange to warn you of high voltage.

[Safety Compliance] Meeting IEC 61010-1, CAT. III 600V, CE standard. High Voltage Protection; Double insulated machine.

True-RMS

Capacitance measurement for start and run motor capacitors

Safety Rated: CAT III 600 V (AMP-310, AMP-320); CAT IV 600 V, CAT III 1000 V (AMP-330)

Handheld clamp meter for taking voltage and frequency measurements

Compact size makes it easy to access hard-to-reach areas and compartments; fits into a pocket or tool belt

Counts up to 6,000

200 A ac and dc current measurement with detachable jaw

600 V ac and dc voltage measurement

Detachable jaw makes accessing wires and viewing the display easier

Product 1: True RMS feature for accurate readings regardless of waveforms

Product 1: 1.2" (30mm) jaw size fits conductors up to 500MCM

Product 1: Large backlit LCD display and built-in Flashlight

This multimeter can accurately measure up to 600A AC Current, Up to 600V AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads.

Digital clamp meter offer a safe, effective way to test electric currents without stripping wires.

NCV non-contact voltage sensing, when detecting current and voltage, it will prompt sound and light according to the voltage intensity

PERFECT FIT: We've specifically designed the case to fit your Fluke 323 True-RMS Clamp Meter. OUTER DIMENSIONS: 9" L - 4" W - 3" H.

100% SAFE: Hard quality EVA material is Semi-waterproof, Shockproof and Durable to protect your Clamp Meter from impacts and splashes.

TRAVEL PARTNER: This hard case for Clamp Meter is lightweight and compact to fit in your backpack, carry-on or luggage for improved traveling protection.

Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

Soft carrying case

True-rms ac/dc voltage and current for accurate measurements on non-linear signals

Measure voltage and current with your clamp jaw

Faster, safer testing - all without touching a live wire - using FieldSense technology

Complete 3-phase voltage and current tests with fewer steps