Best Fluke Clamp Meters in 2026

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms

True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform

Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current

The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform

Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits

Connect your meter to your smartphone with Fluke Connect Measurements

Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks

Record results directly to your phone and the cloud

200 dc current measurements to measure flame rod

Extended resistance range to measure thermistors up to 60k

Capture flue gas temperature

Compact: Small enough to fit in a work bag. It goes where you go.

For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302-Plus delivers reliable measurements time after time.

CAT III safety rated, and tough enough to withstand daily use. Won’t let you down on your job.

Connect your meter to your smartphone with fluke connect measurements

Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks

Record results directly to your phone and the cloud

►Multiple Compatibility -- This hard travel case is compatible with Fluke 902/Fluke 902 FC/ Fluke 373/374/375/376/Fluke 376 FC Electrical Voltage, Continuity and Current Tester & KAIWEETS Digital Clamp Meter HT208A/HT208D.

►Super Materials -- Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your fluke tester from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.

►Excellent Protection -- It is specially designed with the molded compartments that keep Fluke electrical testers and accessories better organized, and there is an adhesive strap in the middle to better fixed your tester. It protects your device from shock, damage, dust and wet!

200 A ac and dc current measurement with detachable jaw

600 V ac and dc voltage measurement

Detachable jaw makes accessing wires and viewing the display easier

PERFECT FIT: We've specifically designed the case to fit your Fluke 323 True-RMS Clamp Meter. OUTER DIMENSIONS: 9" L - 4" W - 3" H.

100% SAFE: Hard quality EVA material is Semi-waterproof, Shockproof and Durable to protect your Clamp Meter from impacts and splashes.

TRAVEL PARTNER: This hard case for Clamp Meter is lightweight and compact to fit in your backpack, carry-on or luggage for improved traveling protection.

Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

Soft carrying case

True-rms ac/dc voltage and current for accurate measurements on non-linear signals

Measure voltage and current with your clamp jaw

Faster, safer testing - all without touching a live wire - using FieldSense technology

Complete 3-phase voltage and current tests with fewer steps

Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

Soft carrying case

True-rms ac/dc voltage and current for accurate measurements on non-linear signals

Continuous Test - Built-in two alligator pliers help you test the voltage and current of devices continuously with no cut by clamping it. Free your hands to adjust parameters for more accurate data.

1000V 10A - These multimeter pin s are capable of testing super high voltage up to 1000V 10A stably and safely. CAT III CAT IV certification provides you with a safe connection and ensures your safety when measuring.

Precise Values - Super sharp tips enable s to pierce through cable cortex and touch tiny electronic components to get precise measurement values. Let you know about the devices accurately.

Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

Soft carrying case

True-rms ac/dc voltage and current for accurate measurements on non-linear signals

Measure voltage with or without test leads

Be safer: measure voltage to 1000V through the open fork, without test leads

Be faster: not need to open covers or remove wire nuts - simultaneously measure voltage and current

Measure safely with CAT III 1500 V rated clamp meter

Thin jaw for access to cables in crowded combiner boxes

Sturdy IP54 rated for outdoor use

Multifunctional Clamp Meter: Get precise readings with ease! This clamp meter measures AC current, DC/AC voltage, frequency, and resistance. Plus, it has added functions of diode test function, circuit on/off test, data retention, capacitance, relative value measurement, and max./min. value measurement. It's perfect for measuring power!

Non-contact Measurement (NCV): Achieve quick and safe electrical checks without feeling the pressure! With this clamp meter multimeter, you can measure the strength of electromagnetic fields without touching any wires. Be alerted of voltage presence with a simple beep and determine voltage levels effortlessly.

User-friendly Features: Get ready for the power-saving potential of your dc clamp meter with its smart sleep mode! It automatically switches off after 15 minutes of inactivity, conserving energy. The bright LCD backlight screen and built-in flashlight make it easy to use even in dimly lit environments, bringing light to every measurement.

The Fluke a3000 FC Wireless AC Current Clamp Module is a fully functional true-RMS current clamp meter that wirelessly relays measurements to other Fluke Connect enabled master units

Fluke 3000 FC DMM

Fluke Ti200/300/400 Infrared Camera

Leak clamp with three scales: 2Ma/20Ma/60a

2000 counts

Minimum 0.001m resolution

Fluke connect compatible leakage current Clamp meter - download the free Fluke connect app from iTunes or Google play to enable graphs for trending

Large Clamp meter jaw - 61 mm jaw for use with large cables

Work light, backlight - forward-facing Work light, Plus backlit display for use in Dark wiring cabinets

Measure up to 99.9 mA range non-contact

Automatic power off

Loop power supply

Auto- and manual-ranging, datalogging digital multimeter measures voltage, current, resistance, frequency, capacitance, temperature, conductance, pulse width, and duty cycle

True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform

Datalogging features include minimum, maximum, and average, on-screen graphing, real-time clock, data hold, and data export to a computer

Measure safely with CAT III 1500 V rated clamp meter

Thin jaw for access to cables in crowded combiner boxes

Work efficiently with dc power measurement, audio polarity and visual continuity

Versatile: precise measurements on the digital resolution, The T5-1000 allows you to test volts, ohms, and current.

Wide range: A Voltage Measuring range of 0-1000 V; current with a range up to 100 A: a resistance range of 0 to 1000 Ω.

Easy Use: The detachable Slim Reach probe tips make sure it works fine in tight spaces. Also, the integrated protection circuit could let your tester stay connected to a voltage source longer. While not using, the tester automatically shuts off to conserve the battery.

UL Certified CAT IV 600 CAT III 1000V, measures 0-600 Amps AC/DC and 0-1000 Volts AC/DC

Patented TightSight display eliminates the need to bend or twist conductors or place your head near or in the panel and allows you to easily read the bottom display when taking measurements

Provides True RMS AC voltage and current for accurate measurements on non-linear signals

Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter

Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter

Designed to provide you with safe, high accuracy measurements for a wide range of applications

True-RMS measurements for accuracy when measuring complex, non-sinusoidal waveforms

40 mm large jaw design

Max/min/average readings and hold function