Best Stainless Steel Temperature Probes Sensors in 2025

Temperature Probe for Camp Chef Pellet Grill; RTD Probe for Camp Chef Dlx Series, PG 22-24, PG24MZG, Woodwind, PG24-44, etc

7"(18cm) Internal Grill Sensor Probe; 47"(120cm) Heat Woven Wires

GREAT Camp Chef Rtd replacement probe and/or additional probe; Digital control meat probe capability, Maintains more consistent temperatures

Type: K Type; Measuring Range: 32~1112°F (0~600°C)

Probe Material:304 Stainless steel; Terminal: 2 Insulated forks; Thread: 2 Meters

Probe size：6mmx100mm/0.23“x3.9“（D * L），Thread ：NPT 1/2"

Materials:UL approved Nylon PA66(Flammability UL 94V-2) for A.C.F parts EPDM rubber for B.D parts

Thick Washer:Each cable gland Connector comes with a high quality rubber washer to ensure it remains watertight to the maximum.

Security Card Slot:Unique card slot design events cable gland connectors will cause accidents due to the reversal and loosening of nuts when used in vibration environment for a long time. We will ensure your safety in the detail design of products. Satisfying click when tightening the cap down so you know its secure.

Fits all Traeger Wood Pellet Grills (EXCEPT PTG)

Maintains more consistent temperatures

RTD probe for Digital Thermostat

Wide Measuring Range: DROK digital thermometer probe is able to tolerate the widest measuring range (-25°c to 125°c (-13℉ to 257℉)).

High-quality Stainless Steel Probe: This temperature test probes has 5*25mm stainless steel housing, which is waterproof, moisture-proof and anti-rust.

Advanced Technology: DROK smart temp probe adopts sensitive and reliable NTC thermistor and connected by PVC wire, 3 meter lead length (9.8ft), available for remote temperate measuring and controlling.

Grounded thermocouple thermistor . The K thermocouple temperature sensor is waterproof . This is a water tight sensor probe

The K type temperature sensor probe temperature range is 0~500℃ ( 932 Fahrenheit ) . Accuracy : 0.2 .

This K temperature sensor is rustproof , it is made from stainless steel . Water proof Insulation Lead

5PCS ADI TMP36GZ temperature sensors,High accuracy solid state temperature sensor.

Voltage Input: 2.7V to 5.5V DC,Output range: 0.1V (-40°C) to 2.0V (150°C)

Temperature range: -40°C to 150°C / -40F to 302F 2°C accuracy

Temp measurement range：-40℃~100℃/-40℉~212℉

Temp display accuracy：0.1℃/℉(<100℃/℉)

Temp sensor cable Length: 2m(78.74in)

Type K Pipe Clamp Temperature Lead Probe

Operating temperature: -40°C to 200°C / 392°F

Clamp Jaw Opening: 1 3/8-Inch (6.5 cm) , Length of Cord: 40-Inch (102 cm)

You will get: the package comes with 30 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need

Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C); And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075; The interface form is flat plug-in

Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement; Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking

Product name: thermocouple Connector; Type: K Type ; Cable Length: 3 meter

Measurement range: -58 to 662°F (-50 to 350°C)

For general purpose temperature applications,Fast response time

Not only the pressure and the temperature, this sensor can measure humidity.

Make sure to put SDO to high to get address 0x77. This will work with Adafruit BME280 library perfectly.

BME280 is a precision sensor, is soldered onto PCB. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.

Product Type: PRECISION MEASURING

Package length: 28.194 cm

Package width: 17.526 cm

The pluggable DS18B20 temperature probe sensor is easy to plug and can be used in a variety of environments.

With pull-up resistor on board, the adapter module can be connected directly to most microcontrollers and it is widely used in temperature monitoring for fish tanks, equipment, machinery, greenhouses.

Widely applications: thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system, etc.

♥This is a high quality temperature sensor.The proble is solid,and can not be bent easily.

♥Durable wire can withstand high temperature

♥The high quality material Platinum is rustproof . Cable: 78.7 inch ( 2m ) metal braided line . The wire is made of shielded fiber glass wire ,thr wire can withstand 600℃ high temperature . It is compesation wire with shield feature . Much better than Teflon .

Made of TPE,allow long term work with high temperature, it is high quality, high-accuracy,

Measurement range : -40C to 120C(-40F to 248F)

Sensor Type: Waterproof NTC sensor, Length: 5m, 16ft

Operating temperature: -40 to 2012 °F

Ungrounded Flexible High temperature K-Type Inconel 600 Thermocouple Probe Sensor

Probe Diameter : 0.5 mm , Probe Length: 150 mm , Wire Length: 1000 mm

Quality material: the 2 meter k-type temperature sensor is made of reliable material, it is anti-corrosion, waterproof and oil proof and can withstand 400 degrees Celsius; The temperature probe can provide you with a long time service, so you can use it with confidence

Sensitive response: the thermal response time of this temperature control probe is 0.1 seconds, such a sensitive response will improve your work efficiency and bring you a nice using experience

Liquid measurement: the difference between this thermocouple probe and other common thermocouples is that it is waterproof and can be applied in some projects that come into contact with water, the feature of this mini-connector probe sensor will make your work much smoother

3 Meter -100~700 C K Type Thermocouple

Connector:Spade Type

Operating temperature: no more than 700 Celsius.

This is a high quality temperature sensor, The photo can be seen: its line is very thick。 You can compare it with the products of other businesses，Our products are much heavier

Element:Pt100(Platinumi) ；Temperature rang: -20~420℃

Probe Material: stainless steel 304; Other parts are not stainless steel 304. Cable Length: 2m/6.6ft ;Terminal:3 insulated forks

100% Brand New item

High quality stainless steel EGT probe against rust

Small and fashionable EGT gauge

This Kit contains with 3pcs of digital sensor module, which can be independently enabled / disabled, which can measure not only the temperature humidity, but also the pressure.

The BME280 sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.

Our BME280 Sensor is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy.

[PRE-SOLDERED]: Solderless! Pins already attached. Ready to plug in and go.

[COMPATIBILITY]: Perfect for all models of Raspberry Pi, Arduino, and various microcontrollers.

[ENVIRONMENTAL SENSOR]: Measures Pressure, Humidity, and Temperature with I2C and SPI Interfacing.

MONITOR HEAT CONDITIONS: Measures and displays the ambient temperature, relative humidity (RH), and the dew point and wet bulb temperatures

IDEAL FOR: This heat index monitor is ideal for industrial uses including HVAC/R and outdoor sports medicine applications

MEASURES: WBGT (Wet Bulb Globe Temperature); TG (Globe Temperature); TA (Air Temperature); % (Relative Humidity).

Temperature sensor supply voltage: 3.0V ~ 5.25V

Operating temperature range:-55 ℃ to +125 ℃ (-67 ℉ to +257 ℉)

Provides from 9-bit to 12-bit Celsius temperature measurements

Parameter information: power supply: 3.0V - 5.5V; Adjustable resolution: 9 - 12 bit; Temperature range: -55 ℃ to +125 ℃; Output : red (VCC), yellow (DATA), black (GND)

What you get: you will get 4 DS18B20 temperature sensors, 4 adapter modules and 4 female to female jumper wires; The adapter module has a pull-up resistor, which can be directly connected to the GPIO for Raspberry Pi without an external resistor

DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx. 1 m/ 39.4 inch, which is long enough to meet your needs

the external diameter of the pipe is 7mm

What You Will Get: the package contains 3 pieces of k type thermocouple sensors, sufficient quantities to meet your daily needs and replacements

Measurement Range: the temperature sensing line of the thermocouple sensor with a measurement range of 32-932 °F (0 - 500 °C); Probe sensor can be activated in 5 seconds, and the interface form is a flat plug in (also flat male connector); Up to 4 thermocouples can be connected, and you can take readings from 4 points concurrently

Versatile Uses: the temperature probes sensors can be applied for general purpose temperature applications, fast responding and suitable for contacting point and solid object temperature measurements; They allow thermocouples to be formed and bent, so you don't have to worry about the risk of cracking; Made of glass fiber, the type K probe sensors feature good insulation and heat resistance

J-Type Wire Thermocouple - Temperature Sensor Probe

Reads -292 to 752 degree Fahrenheit F or -180 to 400 degree Celsius

Length: 6 ft ( 74 inch), 190 cm, braided fiberglass insulation

PT100 platinum resister temperature sensor probe, stable performance

Wide temperature range from20¡æ to 250¡æ, high temperature measuring accuracy

External insulated shielding and internal fiberglass insulation, safe for use