Best Fieldpiece Multimeters in 2025

Fluke116 Digital Multimeter. Designed by Electricians. Engineered by Fluke.

Fluke 62 MAX+. Small in size. Big on toughness.

Fluke 116 HVAC Multimeter with Temperature and Microamps. TL175 Hard Point Test Lead Set.

Customer Service: KAIWEETS provides a lifetime after sale service and technical support. This digital multimeter is included with 2 AAA batteries (pre-installed), comes with a carrying case and 2 decent cable leads.

Multi-Function: This multimeter can test AC/DC Voltage, DC current (Can not for AC current), Resistance, Continuity, Diode Measurement.

Sensitive Test: Please make sure the rotary switch is located at the right test range. Data hold function, backlight function helps you test clearly and quickly in a dim place.

Non-contact Voltage

400AAC and Capacitance

High Voltage and Continuity Indicators

Job Link System Power Swivel Clamp Meter w/1000VDC

Wireless clamp meter

Direct integration with Job Link app (does not require JL2 transmitter)

Molex Probe Tips

A lot of techs refer to these as 'Molex' test leads because of the connectors they measure.

They come as a component of the ADK7 Deluxe Silicone Lead Kit.

Fieldpiece Meter 4 Pocket Case has 4 pockets

It holds one meter and two leads

It measures 10" x 65" x 15"+X8: AB8

ANC7

The HS36 works with all Fieldpiece accessory heads enabling the user to test a wider variety of parameters from a single meter.

Auto Ranging: The HS36 is an auto ranging meter and is very accurate.

Non-Contact Voltage Indication: The NCV function is sensitive enough to detect 24VAC on thermostats.

Temperature up to 1400F. 400AAC with included clamp. Capacitance up to 200MFD.

Works with Accessory heads. Microamps for flame diode test. Frequency for motor setup.

Silicone Leads with Detachable Probe Tips.

Use for walk around testing or in-duct analysis

Clip it to your pocket just like a pen

Narrow tip for insertion into ductwork

HIGH QUALITY MATERIAL: This multimeter test probe is made of premium nickel plated copper material, very good sensitivity, accuracy and stable performance.

STYLE: This test probes is suitable to be inserted into a 2mm connector, and the end connector can be inserted into a 4mm banana connector.

CAT II 600V/10A

*The meter can only measure the active power(real power). It doesn't show Apparent power. If you measure power from a DC-AC inverter please make sure it's PURE SINE WAVE. Otherwise the meter can be burnt or melted.

*Voltage test range: One-Phase 80~260V AC Power, 50/60HZ; Current test range: 0~100A; Inner diameter of the CT: 15mm/0.6''.

*Overload alarm function (over power alarm threshold, backlight and power flickering prompt).

Job Link System Power Clamp Meter w/1000VDC

Wireless clamp meter

Direct integration with Job Link app (does not require JL2 transmitter)

【Even higher Copper Core requirements】Contains 42 pure copper-core wires;Easily dealing with currents of 10A and preventing leakage issues from occurring.The nylon wire inside will make it withstand bending thousands of times without breaking or fraying.

【More secure and durable silicone string】Constructed with flexible PVC/PA material that is double-layered and -insulated.The silicone used is non-toxic,environment friendly and meets both the UL and RoSH standards.Using high quality materials ensures that the test leads are durable,flexible as well as having properties like freeze resistance and heat tolerance.

【Premium test tip and plug】Pure nickel plated copper test lead tips which does not easily break-off,has solid contact traits and speedy and stable measuring reaction times.And the kit will protect it against dust and oxidation.An efficient and stable connection is thus ensured.

⚡The ZIBOO C33 soft case is designed for Fluke T5-1000,T5-600 T6-600 T6-1000.

⚡Applies to both FLUKE Clamp  Meter 302+ 303 305 321 322 323 324 324 365 LH41A etc.

⚡UNI-T Clamp Meter UT210E,UT210D,UT204+,UT203+,UT202A+,UT202+,UT216C,UT216D,UT213C,UT211B etc.

FIT FOR fluke multimeters and fluke test leads tl71 and tl75

MADE OF HIGH QUALITY MARERIAL, These multimeter test probes are made of premium nickel plated copper material, very good sensitivity, accuracy and stable performance

SUITABLE to be inserted into a 2mm connector, and the end connector can be inserted into a 4mm banana connector

Multimeter test probes are made of high quality copper nickel plated which can ensure excellent sensitivity, accuracy and stable performance. CAT II: 600V/10A.

Gold-plated precision sharp test probes can be used to test small components such as circuit boards and mobile phone cameras. It can also be used to puncture wires without damage.

Plug and play. Easy to use. The ends of both probes are 2mm. Just plug the test probes on the 2mm nickel-plated needles and then it can be used directly.

MULTIMETER WITH INCREASED ACCURACY using automatic ranging true root mean square (TRMS) technology

MEASURES UP TO 600V AC/DC voltage, 10A AC/DC current and 50 MOhms resistance, continuity, temperature, capacitance, frequency, duty-cycle, and test diodes

HIGH VISIBILITY DISPLAY with reverse contrast and optical sensor to automatically optimize viewability in dark or bright ambient lighting

The HS36 works with all Fieldpiece accessory heads enabling the user to test a wider variety of parameters from a single meter.

Auto Ranging: The HS36 is an auto ranging meter and is very accurate.

Non-Contact Voltage Indication: The NCV function is sensitive enough to detect 24VAC on thermostats.

MULTIMETER WITH INCREASED ACCURACY using automatic ranging true root mean square (TRMS) technology

MEASURES UP TO 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity

HIGH VISIBILITY DISPLAY with reverse contrast and optical sensor to automatically optimize viewability in dark or bright ambient lighting

Wireless Measurements

Measures 13 Parameters Simultaneously (12 Wireless; 1 Direct)

CFM Test for Air Balancing