Best Goupchn in 2026

Copper: Both ends of the test leads are pure copper alligator clips. The maximum width of the crocodile clips opening is 10mm. Lead length: 3.3ft. Voltage: 1000V. Current: 15A.

Sturdy: The alligator clip is firmly fixed to the wire, and the rubber insulation layer ensures that it will not slip during use. The spring on the crocodile clip is strong enough and will not deform as you use it more often.

Function: Perfect for all electrical testing, electronic applications like automotive accessories and testing circuits on your vintage cars, trucks and motorcycle. As long as whatever you are testing uses a fuse of 15A or smaller.

One end of the test lead is a stackable standard 4mm banana plug. The other end is a pure copper insulated alligator clip. Lead length: 3ft. Voltage: 1000V. Current: 15A.

4mm Banana Plug is stackable. You can plug more than one banana plug into the same banana socket. Sturdy Banana Plugs and insulation greatly enhance durability and flexibility of the leads.

The alligator clip is firmly fixed to the wire, and the rubber insulation layer ensures that it will not slip during use. The spring on the crocodile clip is strong enough and will not deform as you use it more often.

Both ends of the test leads are stackable 4mm standard banana plugs. You can plug more than one banana plug into the same banana socket. Lead length: 3.3ft. Voltage: 1000V. Current: 15A.

Stackable banana test leads cables are very soft, flexible and nice to work with. Sturdy Banana Plugs and insulation greatly enhance durability and flexibility of the leads. Every electronic techie should have these cables.

Perfect for all electrical testing, electronic applications and moderate to low current testing on your vintage cars, trucks and motorcycle. When you have to test many circuits sequentially, this is an absolute necessity.

Test leads are made of high quality copper material which are soft, flexible and durable. Length: 3.3ft/1m. Voltage: 500V. Current: 5A.

One end is 4mm standard stackable banana plugs. You can plug more than one banana plug into the same banana socket.

Test hook clips are made of high quality copper alloy material which have strong electrical conductivity, firm and difficult to bend and deform. Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components.

Back probes are made of stainless steel which have strong conductivity. The shell is made of insulating and flame-retardant material which ensures your safety during testing.

The tip of the probe is only 0.7mm, which can easily pierce wires without damage. The tail is 4mm banana female socket. It is convenient to connect with 4mm banana plug leads.

Perfect for wire piercing, back-probing harness connectors, automotive sensors, diagnostic troubleshooting. No need to strip off the cables and no damage to the cables. Textured non-slip design enhances your comfort. High reliability and long service life.

Multimeter test leads are made of PVC and pure copper material, which is soft, durable and flexible. Even in a low temperature environment, test leads can remain soft and not deformed. Max voltage and current: CAT IV,1000V/10A. Lead length: 3.3ft/1m.

One end of this test leads is standard 4mm insulated banana plug with a cover for most digital multimeters. The other end is 0.7mm precision sharp probes which can easily pierce wires and meet your more detailed measurement needs. Test lead is ergonomically designed with rounded protrusions, non-slip during testing.

Push on alligator clips are made of high-quality metal material with strong conductivity. The shell of the alligator clip is made of insulating plastic, which can prevent short circuits during testing and protect your safety. The end is a 0.08 inch small caliber crocodile clip suitable for multimeter test probe connection.

Standard 4mm banana plug is suitable for most multimeters and other equipment. They are pure copper injection molding.

Test hook clips are made of copper material. The front end of the hook is retractable with a spring, so objects can be firmly hooked. The test hook is firmly welded to the wire, and will not fall off, bend, or deform during testing.

Perfect for using for all electrical and electronic applications in laboratories, schools, automotive, home and industry. This is an ideal choice for school physics laboratories to quickly and cheaply assemble circuits.

Banana plug test leads are made of copper material so they are soft, flexible and nice to work with. Sturdy Banana Plugs and insulation greatly enhance durability and flexibility of the leads. Every electronic techie should have these cables.

The tail of the alligator clips can be perfectly connected with the 4mm banana plugs. 5 colors make it easy to distinguish them during testing. Maximum opening: 15mm. Current Voltage: CATII 300Vac/15A.

Wire piercing probes can be easily connected with the 4mm banana plug test leads. Perfect for wire piercing. No need to strip off the cables and no damage to the cables. Textured non-slip design enhances your comfort. High reliability and long service life. Probe length: 20mm. Voltage: 30V.

F-Type adapters are made of high quality gold-plated copper which can reduce attenuation and enhance transmission capacity. Gold plated can help increase conductivity and help reduce corrosion.

Coaxial connectors are used to extend the length of RG6 coaxial cables. They can save space and are easy to install and disassemble.

Right-angle converters are designed for indoor use. They are usually used for cabinets, furniture or wall panels behind some narrow spaces. It can clean the cables coming out of the wall without messing up.

F Male to dual female splitter cables are made of low loss and flexible RG316 coaxial wires. The position of the connector can be adjusted appropriately according to the usage scenario.

This splitter cable is designed to work with devices and appliances with 50 Ohm impedance. They can be used for cable connection, testing of RF signal equipment and connection when using dual antennas.

Low loss 50 Ohm cables are used for transferring signals in networks. Typical applications for 50 Ohm cables include GPS, cellular and measurement applications.

F-Type adapters are made of high quality copper material which can reduce attenuation and enhance transmission capacity.

Coaxial connectors are used to extend the length of RG6, RG58, RG59 and RG11 coaxial cables. They can save space and are easy to install and disassemble.

Perfect for working with coaxial cables on TV, modem, internet router, cable TV amplifier, satellite receiver, cable modem or other digital audio/video unit.

Replaceable: Multimeter test leads are pure copper soft injection type 4mm banana plug wires. This kit contains 4PCS 2mm copper needles and 4pcs 1mm gold-plated sharp needles. They can be switched to meet your more testing needs and ensure high strength, conductivity, long life and accurate data.

Mini Test Hook: 2mm inner spring mini test hook clip has a retractable clip hook and a extension lead which provide safe and secure connections for clamp and any terminal block. Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components.

Insulated Clips&Test Probes: The insulation puncture test clip can quickly pierce the test leads, which is convenient for non-destructive maintenance testing. This flexible test probes can be used in instrument such as oscilloscopes, and features high sensitivity and reliability.

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.

High voltage probe can withstand 2000V. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.

The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.

RCA to F adapters are made of high quality copper nickel plated material which can achieve higher signal transmission and extremely low signal loss.

Compatible with Atari 2600, Atari 7800, 2 Port Atari 5200, Atari 400, Atari 800, Commodore 64, Commodore Vic 20, Commodore 128, Intellivision, Colecovision, Sega Master System, Sega Genesis. They couldn't work on a 4 Port system.

Perfect for connecting older gaming console to a modern TV. Screw the coaxial F type end on your TV connector, then plug the RCA end in the old style RCA cable from game console. Completely replace older systems' switch box.

4 way trailer wiring harness is made of high quality 18AWG copper wire which is soft and durable. The shell is wrapped by insulating rubber, anti-rust and anti-corrosion. Rated voltage: 300V. Heat resistance: 105°C.

The 4-pin trailer connector is designed to mate with an industry standard 4-way flat receptacle, providing your trailer with a male plug that can be used to replace frayed broken wires on a variety of trailers.

This 4-pin trailer wiring plug is ready to splice into your existing trailer wiring. It can be used to connect tail lights, brake lights and turn signals. Suitable for all types of trailers including boat trailers, horse trailers, motorcycle trailers, ATV trailers and other cargo utility trailer hitches.

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.

Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.

The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.

Crocodile clamps are made of high quality copper material which have good conductivity. The whole body is covered by insulating sheath, which is both comfortable and safe to use.

The battery clamps are very sturdy and strong. Built in a strong spring that won't lose its elasticity easily after multiple uses. The red clamp is positive and the black is negative. Input voltage: 12V, 24V, 36V. Current up to 500A.

Perfect for various battery chargers projects such as voltage tester, cars and truck batteries, solar panels, camping, boats, electric fences. Widely used in various electrical engineering, electric welding machines and voltage testers.

This circuit probe is made of pure steel which is hard, durable and does not bend. The body is integrated with three lights and adopts the small lamp bulb commonly used for cars. Each auto repair shop has stocks so it is easy to replace. The bulb has high visibility and long service life. The brightness of the top 3W lamp can vary with the measured voltage.

The large clamp is convenient for clamping the battery head and the body ground. There is an auxiliary probe at the back of the clip, which is convenient for inserting the plug to be tested with the main probe at the same time. High-strength flexible leads. Lightweight and durable, with strong heat insulation, abrasion resistance and tensile strength.

Banana to alligator test leads are made of high quality copper material which are flexible and durable. Wire piercing probes can be easily connected with the 4mm banana plug test leads. Perfect for wire piercing. No need to strip off the cables and no damage to the cables.

Multimeter test probes are made of high quality copper nickel plated which can ensure excellent sensitivity, accuracy and stable performance. CAT II: 600V/10A.

Gold-plated precision sharp test probes can be used to test small components such as circuit boards and mobile phone cameras. It can also be used to puncture wires without damage.

Plug and play. Easy to use. The ends of both probes are 2mm. Just plug the test probes on the 2mm nickel-plated needles and then it can be used directly.

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.

Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.

The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.

Both ends of the test leads are stackable 4mm standard banana plugs. You can plug more than one banana plug into the same banana socket. Lead length: 3.3ft. Voltage: 1000V. Current: 15A.

Stackable banana test leads cables are very soft, flexible and nice to work with. Sturdy Banana Plugs and insulation greatly enhance durability and flexibility of the leads. Every electronic techie should have these cables.

The upgraded alligator clips feature a full-cover insulation jacket, which is better than half-pack insulation on the market and reducing the possibility of accidental short circuits. The spring on the crocodile clip is strong enough and will not deform as you use it more often.

LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable.

LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power.

There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode.

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use.

P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes.

Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.

-10 Test leader & 5 colors : green×2,white×2,black×2,yellow×2,red×2

-20 Clips by nickel plated steel with PVC insulators and vinyl-covered alligator clips, strong spring clips and easy installation

-Length-20.5", Test lead-1.6" The clips soldered and stamping to the wires, Alligator clips securely to ensure good conduction

3 test leads (red, black, green) connected to low-leakage probes

3 alligator clips (red, black, green)

2.6m lead length

TL224 test lead set, AC285 SureGrip alligator clips, AC220 SureGrip alligator clips, AC280 SureGrip hook clips

Includes TP175 TwistGuard test probes for dependable contact with a variety of test points

TPAK ToolPak Magnetic hanger for convenient suspension of your DMM from a metal surface

Copper: Both ends of the test leads are pure copper alligator clips. The maximum width of the crocodile clips opening is 10mm. Lead length: 3.3ft. Voltage: 1000V. Current: 15A.

Sturdy: The alligator clip is firmly fixed to the wire, and the rubber insulation layer ensures that it will not slip during use. The spring on the crocodile clip is strong enough and will not deform as you use it more often.

Function: Perfect for all electrical testing, electronic applications like automotive accessories and testing circuits on your vintage cars, trucks and motorcycle. As long as whatever you are testing uses a fuse of 15A or smaller.

3 test leads (red, black, green) connected to low-leakage probes

3 alligator clips (red, black, green)

2.6m lead length

Twist guard, adjustable tips enhance safety and versatility length; Includes removable 4 millimeter lantern tips that thread onto the lead tip

WearGuard indicator shows damage to leads

Heavy duty strain relief withstands over 30000 bends

Soft, Safe and Excellent Quality: The upgraded version of the product, the leads are made of high quality silicone, cold and high temperature resistant, very soft, more flexible use. A double insulated lead with 100 high-purity copper wire ensures safety, low resistance and no signal loss. The products are well designed and made.

Precise, Durable and Comfortable: A replaceable gold-plated probe ensures high strength, high conductivity, long service life and accurate test data. The surface gives the user a comfortable, reliable grip on the accessory .

Versatile: The replaceable gold-plated multimeter test probes, alligator clips, test hook and back probe pins can be used in different measurement environments such as industrial, electronics, home and automotive.