Best Current Probes in 2025

Multi -Function T-RMS clampmeter that accurately measures linear or non-linear loads: can measure AC and DC current, AC and DC voltage, Low impedance, Continuity/Resistance/Capacitance, Temperature, Frequency, and Duty Cycle; Easy to use and operate.

Non-Contact Voltage (NCV) Detection: check if a conductor being measured carries a voltage higher than 90V AC without touching any wires; NCV sensor is at the tip of the clamp, press NCV to display EF, bring the sensor close to the conductor under test

Features: LCD display, low battery detection, overload protection, auto power off after 15 minutes, flashlight. Meets IEC safety standard 61010-1 with the CAT III 600V overvoltage protection standard

True-RMS Autoranging Multi -Function Clampmeter with 3 and 3/4 digit LCD (3999 Counts): easy to use/operate; accurately measure AC current, AC and DC voltage, resistance. Can also do continuity, frequency, capacitance, temperature and diode tests

NCV or Non Contact Voltage Detector: detect presence of voltage in an electrical circuit or equipment without touching the wires, red LED will flash quickly when an excess electric field is detected, NCV sensor is at the right upper area of the clamp

With Accessories: Test probes, various types of test leads, crocodile clips, mini wire stripper tool, etc, has LCD display with backlight, data hold function, low battery detector, overload protection, auto power OFF after 15 minutes of inactivity

60A AC/DC Amp Clamp Probe

Use with most DMM

Zero/Calibration Function

TECPEL CA-60 AC / DC mA Current Clamp transmitter probe

[2 buttons] Clamp design and only 2 buttons make operation easy. 45 mm opening for measuring current without touching or interrupting the circuit. It comes with a test probe for convenient measurement.

[Measurement range] Measurement range: 600A DC / AC current. You can measure multimeter current and oscilloscope current waveform.

[High-quality material] This current probe clamp meter is made of high-quality material and is durable and durable. Customers can use it at ease.

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.

LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.

NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.

Versatility: ANENG multi meter is a highly adaptable electronic tool that can be used to measure a wide range of electrical properties, including AC/DC voltage, current, resistance,continuity,diode and Live wire.This makes it an essential tool for anyone working with electronics or electrical systems,also widely used by hobbyists, students, and professionals in various fields, including engineering, automotive repair, and electricians.

Precision: Multimetro typically have two probes that can be inserted into the circuit being measured, allowing for precise and accurate readings. This makes them ideal for detecting even small changes in voltage or current.ST181 with double open jaws can measure is 1.42 inches without interrupting the circuit. Meet your operating habits

User-friendly display: ANENG Multi Tester have a clear and easy-to-read display screen that shows the measurement values, as well as various settings and modes that can be adjusted to suit different measurement tasks. This Voltmeter makes it easy for users to quickly and accurately obtain the information they need.

Higher Current Measurement: RQ-605A current clamp adapter is design for higer AC/DC current test range. It is able to up to 600A,which is the best partner for digital multimeters.

Great Probe of Digital Multimeters: We recommend RQ-605A use WapoRich multimeters such as 770D/ 770K/ 770S. With other brand, it is compatible with most multifunction testers with a sensitivity of 1 mV.

Improve Accuracy: Accuracy: ±(2.5% of rdg + 5digits), with an output voltage of 1 mV per amp and a standard 3/4 inch banana plug. The direction of the arrow on the right side of the clamp indicates the direction of the current( from positive to negative)

PREMIUM QUALITY AMORPHOUS ALLOY CORE ENSURES HIGH EFFICIENCY BUT LOW CONSUMPTION PERFORMANCE--Adopt of amorphous alloy core, with high performance, low loss

WIDER AND MORE VARIETY TEST RANGE--Various current test range, 4A, 40A, 200A, 200-400A test range are available

HIGH BANDWIDTH AND LOW BATTERY INDICATION OFFERS EASIER OPERATION--Band wide up to 100KHz, low battery indication

【Multiple Test Ranges】The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy.

【High Performance】The current clamp can take accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss .

【Easy to Use】The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes.

【Wide Application】: The multimeter leads are suitable for different scenarios and different measurement objects, such as industry, electronics, households and automobiles; The clamp tester can be use to measure AC/DC current, AC/DC voltage, resistance, capacitance, diode, line on-off, temperature, non-contact AC voltage detection

【Precise Measurement】: The amp meter uses a high-precision clamp head to measure AC/DC current without damaging the surface of the wire, and can measure accurately with a resolution of up to 1mA; AC/DC current (100A), AC/DC voltage (600V)

【Test Leads kit with Universal Jack】: The multimeter leads test kit universal test jack, suitable for most types of multimeters on the market, such as pliers, digital multimeters, desktop counters, etc