Best Zcbybt in 2026

This hydraulic jack is commonly used in steel, bridge, electric power, chemical, machinery and other industries.

Our FPY series jacks have the advantages of small size, light weight, flexibility, large working capacity and high lifting force.

When using hydraulic jacks, the bottom should be flat and hard.

Helps prevent jacks from sinking into soft ground.Fit Type: Universal Fit

Interlocking design and handy storage strap for easy storage

Built-in handle for ease of use

Helps prevent RV jacks from sinking into the ground; Not intended for use with hydraulic jacks

Interlocking design and handy storage strap for easy storage

Made of heavy-duty, UV stabilized polypropylene; Includes a built-in handle for ease of use

Supports nearly any tongue jack, post, foot, or stabilizer (round or square)

10,000 lbs. capacity

Stackable

This camper stabilizer jack features 5,000-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Extended height: 24"; Retracted (collapsed) height: 4".

Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.

Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base

Includes 4 steel jacks and a 3/4" hex magnetic socket to raise/lower jack faster by power drill!

Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!

This RV stabilizer features 7,500-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Extended height: 23‐3/4”; Retracted (collapsed) height:5”.

Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.

This RV stabilizer features 5,000-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Extended height: 24"; Retracted (collapsed) height: 4".

Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.

This RV stabilizer features 9,000-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Extended height: 24‐1/2”; Retracted (collapsed) height:4‐1/2”.

Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.

Adjustable: From 16-inches to 30-inches

Load Capacity: 6000 lb.

Features: A quick and easy pull pin that makes it easy to adjust the height of the jack

Effortlessly Stabilizes RVs: Scissor jacks have a certified 7500 lb. load capacity

Easy to Install: Allows either bolt-on or weld-on installation

Adjustable Height: Can be adjusted from 4 3/8-inches to 23 ¾-inches high

This RV stabilizer features 7,500-lb capacity which helps to keep your trailer level and stable. It adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.

Extended height: 24‐1/2”; Retracted (collapsed) height:4‐1/2”.

Tooth gear design of the camper scissor jack arms ensures straight line vertical extension and retraction, the jack raises quickly and the crank handle turns easily.

True HEAVEY DUTY 9k lbs# capacity, made by heavy 11ga steel. Strongest jack in the market!

Includes 4 steel jacks, also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!

Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!

CAPACITY - The slide out supports with 5000lbs each and adjustable from 20" - 48" H. The 5" dia. circular bases are stable on any surface and resist sink-in. U-shaped tops fit most slide-out frames. New folding handle can save space.

QUICK-LIFT DESIGN - Multiple holes slide out rails and tethered pin allow the RV slide out stabilizer to ascend or descend quickly within a certain height.

GREATER STABILITY - The slide out jacks save wear and tear on slide outs by reducing sag, can effectively solve the sagging and bending in the slide-out rails, and also help prevent costly slide out frame repairs. The support stands to help a little bit in the stability of the trailer. But please take note of the warning to "NOT" overtighten the support stands. This could cause damage to your slide out.

[Create Greater Stability]: Dumble Heavy Duty Trailer Jack Stand 2 Pack alleviates tension and increases stability in travel trailer, RV, and camper slide out rooms; These camper stabilizer jacks for travel trailer also reduce rocking motions

[Telescopic to Reach Needs]: Includes 2 RV jacks that adjust from 21 to 37 inches (53.3 to 94cm) in height; Measure distance between bottom of your slide out and the ground or top of RV leveling blocks

[Fits Your Track]: 5-inch (12.7cm) circular base and 5.1 x 3-inch (13 x 7.6cm) U-channel bracket faceplate for secure position with these travel trailer stabilizer jacks RV set

Provides Lift and Stability for RV Jacks: Provides 7-inches of lift

Compatibility: Compatible with up to 10-inch round jack pads

Weight Rating: 6,000 lb.; Overall Measurements: 13 ½-inches x 15-inches x 7 ¼-inches tall

DURABLE CONSTRUCTION — Built tough with a black, powder-coated finish and rust-inhibitive surface that allows it to take on the wear and tear of RV travel

ECONOMICAL SOLUTION — Inexpensive and extremely reliable, this scissor jack kit is a must-have if you’re replacing an old or broken stabilizer jack

EXTENSION RANGE — The scissor jack extends up to a maximum of 24” and retracts to 4-1/4” for compact storage when not in use

Helps prevent jacks and stabilizers from sinking into soft ground

Can be used on uneven surfaces such as gravel, tree roots, etc.

Compatible with Camco stabilizer jacks and plastic jack pads, pad surface is 6.2” x 6.2”

Get secure and level RV positioning and stability

Each jack supports up to 6000 lbs

Cast aluminum

New, highly engineered, low-profile design yields a light weight, high strength, low cost product that is aesthetically pleasing and highly functional.

High strength allows for stabilizing increased loads and fine leveling.

Rapid extension provides quick activation of both up and down movements.

Includes 2 Red Hound Auto telescoping stabilizer jacks, 1 adjustment rod handle and mounting hardware (easy to read, detailed instructions included)

Compressed height: approximately 12"; Extended height: approximately 18"; Mounting holes 3" center-to-center; Mounting plate approximately 4" x 2".

Each stabilizing jack can hold up to 650 lbs. lift capacity or 1,000 lbs. support capacity if used properly.

NO MORE SWAYING: Use the Dumble | Camper Stabilizer RV Leveling Blocks to stabilize, secure, and level your RV, camper, or travel trailer; Transfer weight on a constant vertical plane, support a car in storage to save from a tire going flat, use on trailer with single axle to keep the trailer from tipping back with too much weight in the wrong places, use under weak steps, or place in crawl space to stop floor creaks and rattles; For stabilizing only recreational vehicles – Do not use to raise

FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm); Make sure the height is correct for your use; Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod; Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application

BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT); All components constructed from aluminum for maximum strength and longevity that resists corrosion; RV levelers nest into each other (stack) for storage

【What will You Get】4 Pack RV Stack Jacks come with a colorful storage bag, which are ideal for stabilizing and leveling your RV, great stabilization solution for your RV, trailer and camper, etc

【Make Your RV Stable】These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with square base design, each can support up to 6000lbs, with which you needn’t to worry about your RV move or bounce anymore

【Height Adjustable】The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise

ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis

EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation

THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer

RV LEVELING PADS: Function as a multi-use leveler, jack stand, and tongue wheel support for a versatile addition to your tool kit

RAMP FUNCTIONALITY: Attached easy to grip handle acts as a transition between pads for a smooth ramp

STACKABLE DESIGN: Pads lock together tightly for extra stability and dependable use with heavy loads

ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis

EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation

THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer

【OEM DESIGN】This RV electric stabilizer jack replacement switch is manufactured in accordance with OE specifications and can be directly installed. The wires can be directly connected to the original motor and battery; comes with extra terminals, you don’t need to buy extra.

【COMPATIBLE MODELS】Directly fit for Lippert high-speed power stabilizer jacks. Replace the motor control switch in the rear landing gear leg for the RV or fifth wheel or stabilizer jack LC298707, LC198641 or LC363284 ,etc. - For more compatible models, please refer to the oe Number (OE Part Number: 387874).

【PREMIUM PERFORMANCE】This power stabilizer jack control switch can provide excellent performance and long service life. Better circuit connection and surface treatment process than most similar products. IP66-rated Waterproof, Weatherproof, more durable. Replace the old electric stabilizer switch and back to the road!

Ideal replacement for Atwood, Fulton and other non-screw design corner stands.

Bolt-on application; mounting hardware included.

700 lb. lifting capacity and 1,000 lb. load capacity per jack.

🚐【Heavy Duty Steel RV Jacks and Stabilizer】: Made of heavy-duty steel with electrophoresis treatment on the surface so that it is durable and strong enough to stabilize and level most RVs.

🚐【Specification】: Designed with plenty of room for you to stretch the rv scissor jack in 24” maximum height, 4” retracted height, 26" retracted length and 7.3" width.

🚐【 2 Way to Use】: The crank handle turns easily to help raise/ lower the camper scissor jack quickly, power drill (NOT INCLUDED) is more faster. And jack with the smooth tooth gear design of arms to its' ensures straight line vertical extension and retraction for your RVs.

Includes waterproof switch, harness and reset breaker

Legs extend up to 30”

DIMENSIONS: 79” L x 6. 2” W x 19” H, 58 pounds