Best Zhixing in 2026

Replacement Model:WG502, WG508, WG505, WG509, WG500, WG501

The bag is designed with a zipper, which makes it easy to clean up fallen leaves or dust. In order to prevent the zipper from falling off, we reinforced the sewing thread in the zipper part.

The maximum capacity of the bag is 10 gallons of mulch leaves.

Replacement Model: LE750, LE710, LE760. The 243801-02 blade is made for use with the EH1000 type 5 and Type 6.

Product specification：7-1/2-inch blade with wear indicator. 2(pack) blade, 4-wear Indicators. Blade Material: Hardened Steel.

This is a replacement blade for the LE750 Hog 7.5inch Lawn Edger Black-Decker EB-007. This blade is easy to install, please wear special gloves before installation to avoid accidentally hurting your hands. Continue mowing the lawn even if the original blade cannot be repaired. In addition, proper cleaning and maintenance can increase the useful life of the blade.

Replaces Model: M145994 M145995

Compatible with the following models: GX255, GX325, GX335, GX345, GX355, GT225, GT235, GT245.

Product size: These Decals are 30 1/4 long

Replacement part numbers: 697110, 795387. Replace accessories for lawn and garden equipment engines.

Package includes: 1 x Crankcase Gasket, 2 x Oil Seal Combo.

Note: Before installing the gasket, for safety reasons please turn off the power to cool the engine and disconnect the spark plug wire.

A119BD Single Composite Skid Shoe Replaces GXH24279.

Compatible With JohnD-eere Models: 102, 105, 115, 125, 135, 145,155C, 190C

Fits the following Snowblowers Models: X110, X120, X140, L100, L105, L107, L108, L110, L111, L118, L120, L130, G110, LA100, LA110, LA120, LA130, LA140, LA150, LT150, LT160, LT170, LT180, LT190.

Replacement: A-37471

Compatible with all models of rechargeable vacuum cleaners. Compatible with the XLC02ZW Compact Vacuum

Mounted directly on extended tubes, durable bristles facilitate deeper cleaning for maximum cleaning power. Easy installation: just put the brush on the extension tube. Convenient to use for buyers.

Product 1: [VERSATILE]: Clean sweeping patios, driveways, decks and garages

Product 1: [POWERFUL]: 6-amp motor creates up to 155 mph air speed (max). Required extension cord rating: 14 gauge

Product 1: [NO LOAD SPEED]: 14,000 RPM

for arranging layers of laminate next to each other

mainly used at room ends, so as to fit a layer of laminate under a door frame etc.

with 3 felt pads underneath for gentle working and protecting surface of the workpiece

[53 GALLONS/MIN] That’s right, the 13.0 Amp motor mulches up to 53 Gallons of leaves per minute

[RIGHT INTO THE BAG] Disposes of leaves and debris into a bag you can attach beneath (bag not included)

[11:1 MULCH RATIO] That’s 11 bags chopped down into 1, all due to the innovative blade-less Flex-a-Line mulching system

[KIT INCLUDES] WORX Electric Leaf Mulcher and Collapsible Yard Waste Bin

[MULCHES 53 GALLONS/MIN] That’s right, the 13.0 Amp motor mulches up to 53 Gallons of leaves per minute

[RIGHT INTO THE BAG] Disposes of leaves and debris into a bag you can attach beneath (bag not included)

[POWERFUL]: 13-amp motor with 8,000 rpm mulches up to 55 gallons of leaves per minute and reduces yard waste up to 1/16th its original size.

[COMPATIBLE]: Conveniently attaches to leaf-bag-lined trash container for easy disposal.

[CONTROL DIAL]: Adjustable control dial with settings for wet or dry yard waste.

Ideal for turning branches and twigs into nutrient-rich garden mulch

Powerful 15 amp motor effectively chips and shreds branches up to 1.5-Inches thick

Compact design with 6-inch wheels for easy portability

Ideal for turning branches and twigs into nutrient-rich garden mulch

Powerful 15 amp motor effectively chips and shreds branches up to 1.5-Inches thick.No Load Speed (rpm):4100 rpm

Compact design with 6-inch wheels for easy portability; Sound power level: 113 dB

The chipping power of the 10 hp Briggs engine coupled with Patriot's unique design will wow you.

Make short work of branches up to 3 inches in diameter.

Shredding leaves is a breeze with Patriot's swinging y-hammer system.

This Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and debris

Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees

This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity

Wood Chipper Shredder has a 11.8 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and branch's leaves into mulches.

Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees

Powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity

A manual bud trim machine designed to produce finely groomed herbs and flowers with precision.

Quickly and effortlessly process high volumes of plant material using hand-cranked sweeper curtains.

Includes a quadruple-edged straight blade for wet trimming and a serrated blade for dry trimming.

DETAILED SPECIFICATIONS - Our Wood Chipper Blades are only designed specifically for the LCE01 GreatCircle Wood Chipper. The blades have a dimension of 3"L (76.5mm) x 1.3"W (34mm) (or 1-11/32) x 0.19"H (5mm) (13/64). Each blade weighs 0.22lbs / 3.5 ounces. These blades have a Center-to-Center length of 1.5", an Inner bolt diameter of Ø9mm & Outer bolt edge is Ø18mm

EFFICIENT RESILIENT DESIGN - These Chipper blades are precision manufactured to be mounted with (2) M8x25 bolts holding each blade into place (*Note: the bolts are not flat but slanted at 10.9 degrees). We chose a very strong & long lasting CR12Mov Steel material for our blades, providing excellent longevity of use. Our blade edges sit at a 39.5 degree, for optimal chipping capability

SAFETY & PROPER USE - We always recommend that users always wear hand & eye protection when operating any machinery/equipment, for your safety. Our blades surfaces are oiled to provide anti-rust capability & shelf-life. These blades are for Chipping, Shredding & Mulching of wood & natural shrub, theses blades are NOT for metal, rock, cement or any other hard surface materials/debris

20：1 Reduction Ratio - This efficient wood chipper allows you to reduce 20 bags of leaves and debris to only 1 bag. The higher reduction ratio 20:1 is desirable for the majority of applications you would use wood chips for, such as garden mulch and surface coverings. Ideal for turning lawn debris into mulch or compost to save time and money with yard cleanup.

2 Feeding Hopper - making quick work of unwanted brush piles and turning them into useful mulch. Yard waste such as leaves and grass clippings can be dropped in the hopper, while larger branches can be fed into the limb chute.

Powerful - This Chipper with powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity. Max speed: 3600RPM，Max torque: 9.14ft-lbs@2500RPM

🏞[ Excellent Capacity ] - This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching

🏞[ Powerful & High Engine ] - GARDENBEAUT Chippers starts by recoiling, and has a powerful 4-stroke OHV, single cylinder gas engine with 7 horse power which makes it powerful enough to chip the leaves,tree limbs,branches, or up to 3" diameter wood without a problem.

🏞[ Flexible & Agile ] -This stump grinder has durable wheels for easy maneuverability, plus a large capacity bag for collecting clippings and a labour-saving design that will help you work more efficiently.

EFFICIENT RESILIENT DESIGN - These Chipper blades are precision manufactured to be mounted with (3) bolts holding each blade into place (Note: the bolts are not flat but slanted at 10.9 degrees); We chose a very strong and long-lasting CR12Mov Steel material for our blades, providing excellent longevity of use; Our blade edges sit at a 40 degree, for optimal chipping capability

DETAILED SPECS - Our Wood Chipper Blades are designed for the Landworks or SuperHandy Mini Steel Wood Chipper; The blades have a dimension of 4.15"L (105.4mm)(or 4-5/32) x 1.33"W (33.7mm) (or 1-21/64) x 0.18"H (4.5mm) (or 3/16) inches; Each blade weighs 0.22lbs / 3.6 ounces. These blades have a Center-to-Center (Outer Holes) length of 3.16" inch and a Center-to-Center (Inner to Outer Hole) length of 1.55" inch, with an Inner bolt diameter of Ø8.7mm and Outer bolt edge is Ø12.3mm

Earthwise Power Tools by ALM powerful leaf shredder with a 13-Amp motor that delivers power and performance comparable to a gas leaf mulcher

Leaf mulch shredder with a 19" funnel opening and 13" bladeless cutting diameter; Power with 55 gals/min mulching capacity with 16:1 mulching ratio

Sliding control lever with (3) mulching settings; Elastic band with (4) clips for easily attaching bag at base of mulcher

Powerful mulcher wood chipper with a 15-amp electric motor to shred branches up to 1.75" thick. Works best with dry/aged branches

Safety shutoff with quick re-set button: When overloaded the motor will shutoff preventing any damage, to continue using a circuit re-set button located by the power button on the chipper

Chute and tamper tool to keep your hands free and safe from the corded electric wood chipper, 1.2 Bushel collection bin for convenient cleanup

This 3-in-1 wood chipper shredder mulcher design has a reduction ratio of 15:1 when using the top hopper for 1 by 2 inch max volume chipping or shredding, side chute for 3 inches max branch or limbs, or the attachable leaf vacuum for mulching

The slanted housing design reduces jams, unlike other chippers, hook up your ATV, lawn mower or small tractor, for easy transportation with a tow bar kit and use the vacuum inlet for easy leaf mulching

This Chippers powerful recoil starting 7HP horizontal 4-stroke single cylinder OHV gas powered engine, handles up to 3 inch diameter wood without a problem, fuel with 87 plus unleaded gasoline, 0.7 gallons max capacity

MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching

UNIQUE DESIGN; The Slanted Housing design reduces jams, unlike other chippers; Hookup your: ATV, lawn mower/small tractor, for easy transportation with a Tow Bar Kit and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (BOTH SOLD SEPARATELY)

POWERFUL; This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity

<p>EFCUT C30 MINI Wood Chipper Shredder has a 11.8 inch cutting rotor with 2 blades + 4 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and branch's leaves into mulches.</p>

<p>EFCUT C30 MINI Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 15:1</p>

<p>EFCUT C30 MINI Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity</p>

<p>C30 LITE Wood Chipper Gas Powered combined with Bigger 11.8 inch Cutting Rotor than other Mini similar chippers that provides more stable speed and the latest durability upgrade high-speed steel blades, equipped with powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Engine with reliable quality and superior performance, makes chipping easy with 3600 RPM MAX speed. </p>

<p>This Mini Wood Chipper Shredder Mulcher is more emphasis on service life, more lightweight and durable. Small but still excellent core functions make more fast, easy and efficient chipping and less required space. Capable of high volume Chipping/Shredding/Mulching with a Reduction Ratio of 15:1 up to 3" MAX branches, limbs and debris. Compact design gives you portable move and store.</p>

<p>Built with newly upgraded reinforcement of welding and metal, come with constantly improved manual and instructions to make easier to assemble and start. Unique Designed Check Windows for faster blades replacement; Large Extended Feeding hopper makes it easier to feed big branches with twigs; Highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with an angled range of 90°-145°degrees.</p>

DEPENDABLE – Featuring a powerful 301cc 4 Cycle Viper Engine; Always-ready 11" wheels will never go flat to make transport quick and easy.

EASY-TO-USE – This Chipper Shredder makes quick work of unwanted brush piles and turns them into useful mulch.

POWERFUL CHIPPING – Strong enough to chip branches up to 3” in diameter in the chipper cone.

DEPENDABLE – Featuring a powerful 212cc 4 Cycle Viper Engine; Always-ready, 11" wheels will never go flat. It is super easy to transport to your desired chipping site.

EASY-TO-USE – This Chipper Shredder makes quick work of unwanted brush piles and turns them into useful mulch.

POWERFUL CHIPPING – Strong enough to chip branches 3” in diameter in chipper cone.

EFCUT C30 Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves on branches into mulches

EFCUT C30 Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 20:1

EFCUT C30 Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity