Best Zyhobby in 2026

1 X Fuel Tank 360ml For Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 66.5g (0.14IB)

Packaged: 1 pack 500ml Fuel bottle for Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 92.5g (0.2 IB)

1 X Fuel Tank 360ml For Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 66.5g (0.14IB)

Packaged: 1 pack 1000ml Fuel tank for Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 114g (0.25 IB)

Built-in 6:1 reducation gear,increasing 6 times torque

Lower starting resiatance with a high quality brush

Contactor in the circuit to reduce power loss

Quantity : 1 Piece

Color:Red/Blue/Black Send by randon

Round Fuel Dot Plug

Packaged: 1 pack 260ml Fuel tank for Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight:0.11IB

Fit : 20CC-80CC gas airplane starter

Package Weight: 0.1kg (0.22lb.)

Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

Streamlined unibody fiber glass boat, the same material with a real boat, high endurance for high speed.

SSS3764 Brushless Motor with 90% efficience can provide more power for the rc boat.

The water-cooled brushless motor provide more power to the remote controlled boat.

Support Flight Weight: 3kg

1:10 Realistic Scale High Speed RC Car: This RC car equipped with all-terrain tires and upgraded powerful motor, achieve up to 48 Km/h high speed, gives you a greater competitiveness in drag racing. Full scale of speed control , offers a smooth speed varies and high-frequency acceleration, delivering a real-world driving experience for maximum fun and high-speed thrills.

4WD Metal Oil Shock Absorbers: This 4 wheel driving car adopted with independent suspension and metal oil shocks absorber, which can effectively protect car from crashes and dropping, increased durability, offers good all-around driving capability, provided the freedom to drive where you want to drive through water, mud, sand, grass and other conditions that wouldn't have been possible before.

2.4Ghz Anti-Interference Control System: The 2.4G frequency provides a quick-responsive control, the max operating range up to 100M (330ft) which is much far than other rc cars, allow you to race alongside with other vehicles without any interference. This hobby grade truck is designed for beginner and intermediate level users who want to move towards to high-end hobby grade or just step out of the general RC car.

Realism Seeker: 1/12 Scale delicate army green body with fine pad-printing design,have precise details both in size and detail,like real rear-view mirrors, detailed dashboard, rubber tires, and removable accessories such as a fuel tank, an ax, a shovel, a functional hood, and a folding windshield. Making this off-road vehicle exquisitely equal to the legendary historical Willys.

Professional And Powerful Design: Equipped with 2.4Ghz radio system, smart light effect, low-battery warning, forgotten alarm, motor overload protection, and more function. Multi-leaf springs with dampers as well as offset differentials absorbs rough terrain with ease, help the 1941 MB Scaler rc turck driving on all terrains like beach, sand, rock, or concrete road.

2 Speed Transmission: The Beginner Mode with 50% accelerator limitation helps the beginner get started on the RC game. When going gets tough, use the transmitter to shift into Climbing Mode for incredible 4-wheel drive pulling torque. Provides modelers from rookies to experts with the opportunity to enjoy exciting RC game.

【ABS CHASSIS AND REINFORCED BODY FRAME】 The whole chassis of the remote control car is made of ABS plastic and its main body is made of alloy material. All these properties give the truck a better collision resistance which prolongs its life span.

【STABLE PERFORMANCE FEATURE】 This is a toy grade RC car. The 1/14 scale makes it easier to control. It can go up to 20Km/h at full speed with a powerful built-in brushed motor. Its powerful performance makes this RC car an ideal toy for boys and girls of 8 years old and older, Adults also can have relatively fun as well.

【NO DELAY RTR REMOTE CONTROLLER】 The easy-to-use non-interference remote controller of 2.4GHz frequency makes the car always ready to run and has a non-jamming function. The radio control distance is about 50 meters, it is an excellent off-road monster truck in both indoor and outdoor.

1:16 Realistic Scale High Speed RC Cars: The remote control truck is equipped with a fast brushed RC motor, which can produce more horsepower for the RC cars. RC truck can go up to 20+Km/h at full speed with the powerful built-in motor. Make operators in marvelous enjoyment.

2.4Ghz Non-Jamming Race Car: The toy truck is equipped with Easy-to-use non-interference remote controller with 2.4GHz frequency makes the car always ready to run and has non-jamming function. The radio control distance is about 260 feet, No worries to run this remote control cars on grassland , sands, and bumpy grounds.

Top Material: The interior of the stunt car is made of nylon (PA), which has both excellent strength and abrasion resistance, allowing it to stand up any sport. The main body is made of ABS material, which has high tensile strength and is very resistant to physical impacts, which allow the finished plastic to withstand heavy use and adverse environmental conditions.

Package includes 2PCS tank air cooler.Compatible with HPI HSP Redcat Traxxas Axial Himoto 1/8 1/10 nitro engine rc car truck

Made of aluminum alloy material,has good heat dissipation performance.

How it works:When the exhaust gas passes through the back pressure cooling pipe, it can cool the gas filled into the fuel tank. Then the temperature of the fuel is naturally not so high. On the one hand, it can slightly increase the life of the engine, on the other hand, it can lower the working temperature of the engine

Compatible with HSP 1/10 nitro car truck buggy,also widely used for other brand 1:8 1:10 RC car buggy truck.

Diameter: 10mm/0.39inch ; Length: 29mm/1.14inch

Material:Aluminum Alloy,It is a high upgrade parts for your RC Car.

AMORIL now powers the this RC buggy with a system featuring its 60A ESC (support 2/3S, we recommend the 3S lipo battery whose discharge rate is less than 25C ) and 7.4 V19000RP 550 brushed motor. 70+ km/h potential speed is achievable in optimum driving conditions on 3S LiPo. Equipped with a professional RC transmitter, new bashers will be able to set throttle limits at 30% or 70% until they are ready to use the full speed potential. Fast, rugged and factory-built, the 3S LiPo-compatible AMORIL 1:14 buggy 4X4 3S RTR comes ready out of the box to bash on any terrain.

A responsive Steering Assembly and 1.7 KG 3-wire Servo complement this RC car's ultra-reliable drive system. The main shaft and full-time 4WD transmission with large powder gear withstand huge torque, have been chosen for reliability during extreme bashing. Upgraded 7 adjustbale Metal Pull Rods and the Oil-filled shocks with coil-over design for simple maintenance, extra toughness and amazing handling improve the control performance. This combination provides incredible acceleration and speed.

New features of our AMORIL 1:14 Ready-to -Run RC truck like a stronger Alumium Alloy Chassis and a stylish, high-downforce Nylon Wing help keep all four wheels planted as you explore the upper limits of its outrageous speed range;Tough Rubber Wheels give the 1/14 scale fast remote control car effective traction for bashing on almost any terrain;Front and Rear Bumpers protect the car from crashing or heavy hit. Those were built for exciting bashing speeds and extreme,all-terrain durability.

Suitable for nitro model RC car truck tank,with scale on the bottle.

Universal rc oil bottle 250CC compatible with HSP HPI Tamiya Traxxas 1/8 1/10 1/18 nitro power rc car

Capacity: 250cc; Diameter of Tube:8mm

🚗【Proportional teering】Designed with 1:16 Scale, Remote Control Truck is like a real racing off-road car. With 2.4GHz transmitter strength, its strong transmitter power means no signal interference if multiple players race at the same time.Amazed by its proportional teering,make it different from any other RC car.Support any repalcement for broken components of Realistic Car Appearance

🚗【A Maximum Speed of 20km/h】RC Crawlers is powered by a 2 wheel drive motor system that can push the buggy car to a maximum speed of 20km/h. With four options-forward, backward, left and right-it is easy to operate. Both children and adults can master operation easily

🚗【High Performance】Motor with overheat protection, combined with a 7.4V 500mAh in-car battery pack with charge protection, you can enjoy the fun of driving for about 25+ Mins a time with this rc rock crawler

✔Compatible with RC Nitro Car,Truck, Buggy,Truggy

✔Capacity: 250cc

✔Diameter of Tube:8mm

High Speed: The high-speed 3300 RPM motor delivers up to 10 GPM flow rate. Fill up your tractor's tank in a swift 43 seconds, and enjoy a 9.8 ft suction and 26.2 ft lift. Meet VEVOR's portable fuel transfer pump, designed for diesel, kerosene, and transformer oil. Do not use it for gasoline, machine oil, or other liquids.

Built Tough: Cast iron and aluminum alloy construction make this diesel pump wear-resistant and corrosion-resistant – perfect for tough outdoor conditions. The internal alloy impeller and stable high-torque motor keep it running smoothly for up to 30 minutes non-stop, ensuring efficient and reliable fuel transfer.

Nozzle Magic: Our fuel transfer extractor pump comes with an automatic shut-off fuel nozzle, making refueling a hands-free experience you'll love. Just press and release the handle switch, and the nozzle stops automatically when the tank is full. Say goodbye to constant monitoring during refueling.

1 X Fuel Tank 360ml For Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 66.5g (0.14IB)

✔Universal Part for Mostly of Brands 1/10 Nitro Car, To filter impurities in the oil, keep Dirt & Debris away from your engine, to protect your engine

✔Diameter of Ends:5mm; Length:36.5mm

✔Made of Aluminum Alloy,Anodized,CNC machined,High precision

Packaged: 1 pack 500ml Fuel bottle for Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 92.5g (0.2 IB)

1 X Fuel Tank 360ml For Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 66.5g (0.14IB)

Compatible with HSP 1/10 nitro on-road car buggy truck

Fits all nitro rc car, compatible with Redcat Racing Lightning, Tornado, Tsunami and Volcano 1/10 models cars

Replacement Parts NO.:02004,a great replacement part.

1/12 scale Willys Jeep: The 1941 Willys MB is a new, 1/12 scale, ready-to-run radio controlled platform that delivers it all - technical rock crawling prowess and detailed scale looks. The 4x4 body was designed for looks and function, featuring a fantastic LED system (four turn lights, two headlights and a blackout lamp) that helps explore the dark of night.

Remote Control Military Vehicles: Features a delicate army green and moulded hard body finished with fine pad-printing design. Realistic scale detailing including canvas seats, rear-view mirrors, dashboards, leaf springs & dampers, tires and metal ladder frame rails. Additional movable scale features and accessories like rear seat, axe, shovel, two bins, windshield, rotating steering wheel and fuel tank. Optional parts canvas top, (machine gun and trailer) are in production.

Excellent Driving Performance: 2.4GHz ANT transmitter provides modelers from rookies to experts with the opportunity to enjoy exciting trails with a Two-speed transmission option (Crawling Mode and Beginner Mode). The professional design and smart remote controller will bring you a far superior experience. Unmatched versatility makes the ROCHOBBY Remote Control Truck adaptable to just about any situation or driving style.

Packaged: 1 pack 1000ml Fuel tank for Gas Airplane RC Model

Fuel inlet/Outlet/Cap: metal material

Weight: 114g (0.25 IB)

Dynamite 12V DC Nitro Engine Heater, DYNE1600

【Upgrade Decoration】The 1/24 Scale Fire Extinguisher and fuel tank accessory equipped with a bracket, it can be better installed on your rc car.

【Excellent Detail】High degree of simulation, these 1/24 scale Decoration are plastic injection molded, more exquisite than 3D printing.

【Multiple options】Three combinations of decorative accessories to choice, a great way to add micro size detail to your micro size rig.