Best Long Range Access Points in 2026

Ubiquit Unifi AP AC Long range

The installer needs networking knowledge to get it to work properly so for people that can’t get it to work.

【Superior Speeds with MU-MIMO】Outfitted with the latest 802.11ac Wave 2 MU-MIMO technology, the TL-WA1201 easily delivers dual-band Wi-Fi speeds of up to 1200 Mbps to multiple devices at the same time.

【Multi-Mode 4 in 1】Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP.

【PoE for Easy Installation】TL-WA1201 supports Passive PoE power supplies, can be powered by the provided PoE adapter, making deployment effortless and flexible.

1.3 GHz dual-core processor (now upgraded to support full-duplex 1 Gbps TCP/IP performance).

Four-stream high-efficiency Wi-Fi 6 technology.

5 GHz band 4x4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps.

【What Is CPE 200】: CPE200 wireless bridge is a 5.8G high-performance,high-speed outdoor long-distance wireless network bridge.The advantage is long transmission distance, strong penetrating ability, and strong anti-interference ability .Point-to-point and point-to-multipoint outdoor coverage and applications without having to layout network cables making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.

【5.8G Technology & IP65 Level Waterproof Design】:5.8G frequency using a new generation of 11ac technology is better than 2.4 G traditional CPE. It makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference. Wireless bridge IP65 dustproof and waterproof, lightning protection,and antifreeze,is very suitable for outdoor use.

【2-3KM Transmission Distance】:This wifi outdoor bridge built-in 12dBi directional antenna can significantly improve the transmission and reception performance of wireless signals,data rate max up to 900Mbps between the bridge,which supports 2-3KM long-distance wireless transmission.suitable for warehouses, garden,barns, shops, or garages next to your house.

【Superior Speeds with MU-MIMO】Equipped with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP225-Outdoor easily delivers dual-band Wi-Fi speeds of up to 1200 Mbps to multiple devices at the same time.

【Indoor/Outdoor Use】The durable, weatherproof enclosure protects the access point against harsh outdoor conditions and provides stable wireless coverage up to 200m+ range at 2.4GHz and 300m+ at 5GHz in outdoor settings. Discreet appearance can also fit with any indoor scenarios.

【Integrated into Omada SDN】Omada's Software Defined Networking (SDN) platform integrates network devices including access points, switches and gateways with multiple control options offered - Omada Hardware controller, Omada Software Controller or Omada cloud-based controller*(Contact TP-Link for Cloud-Based Controller Plan Details). Standalone mode also applies.

【Superior Speeds with No Wait】23 dBi Directional 2 × 2 MIMO Antenna, 256 QAM and an 80 MHz bandwidth boosts overall speeds up to 867 Mbps.

【Long-Range Wireless Transmission】Excellent beam directivity, improved latency, and noise immunity makes CPE710 an ideal choice and cost-effective solution for outdoor long-distance wireless networking applications.

【Stable Structural Design and Flexible Installation】Snap-lock parts make assembly simple and convenient. Pole mount kits and the freedom of three-axis alignment facilitate flexible installation. Sturdy design ensures stability in windy conditions.

【What CPE120 is】KuWFi CPE120 is an Outdoor Wireless WiFi Bridge router support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor ethernet bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃

【Multiple operation mode, for different network environment】 Point to Point/Multi-Point(1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to internet bridge CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to this give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR

【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless ethernet bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance, for building to building wireless wifi bridge

🌐What Is CPE977: 5.8G wifi bridge point to point outdoor CPE977 is designed with digital tube display, supports point to point/point to multipoint pairing. Can be paired by dialing without entering the GUI, avoiding complicated setup procedures and saving a lot of time.

🌐1200Mbps Gigabit Wifi Bridge: Extend wifi/network from building to building, transmission rate between 2 point to point wireless bridges up to 1200Mbps. The network speed up to 433Mbps. Transmission/receiver bridge support automatically connecting network, WDS network mode & video network dual compatible, provides stronger anti-interference ability and better stability.

🌐5KM/3.1Miles Transmission Distance: With built in 16 dBi integrated directional antennas, the ethernet bridge extends networks up to 5 KM/3.1Miles long distance. This ULNA wireless bridge is widely used in daily life. Ideal for warehouse, garden, barn, office, shop, or garage next to your home to extend the network.

WHY CHOOSE UEEVII? 1. Professional wireless bridge brand, 2. Professional after-sales reply within 24 hours; 3. 1-year warranty replacement and lifetime technical support; 4. Sufficient inventory and continuous stock; 5. Low-end, mid-range, and high-end wireless bridges meet Your different needs; 6. Provide the most cost-effective network solution.

PLUG AND PLAY: CPE450 point to point wireless bridge is pre-configured point-to-point before leaving the factory, only need to connect other devices to the master bridge and the slave bridge respectively, and provide power.

300MBPS TRANSFER SPEED: The transmission speed between 2 ethernet bridges can reach 300Mbps, the outdoor WiFi bridge has two built-in 10/100Mbps RJ45 ports to provide you with a wired speed of up to 100Mbps, just connect an access point/router to the slave bridge and broadcast WiFi Get a wireless network.

WiFi 6 Dual-Band AX1800 speed, coupled with MU-MIMO technology, supports up to 200 client devices and 2,500 sq. ft. of coverage.

Connect wired Ethernet to the 2.5G port for maximum speed.

Simplified deployment with PoE+, or power using the optional PAV12V power adapter (sold separately).

What can the UeeVii CPE453 long-range wireless bridge help you do? Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs. Also suitable for surveillance cameras.

Cost-effective Hardware Configuration: Internet bridge adoption MTK's enterprise-class master chip, industrial-grade circuit design, supports IEEE802.11a/n/ac protocol and can provide stable wireless access speed and 10/100Mbps Ethernet exchange processing speed.

Outdoor IP65 Level Weatherproof: Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in the extreme environment, real-time, long-term, stable, and efficient transmission, enhance user experience.

[Business Class Wi-Fi] 802.11AC Wave 2 Wireless Speeds to 867Mbps on 5GHz & up to 400Mbps on 2.4GHz

[IP67 Rated] Weatherproof & Dustproof Housing Can Withstand Any Harsh Environment

[Crowd-Proof Network] Dual-Radio MU-MIMO Improves Performance & Expands User Capacities

600mw high power long range coverage / up to 1 mile

Wireless n300 speed. Supported Modulation : 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM

Poe and mounting kits included

5+km transmission range OS3 adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Flexible power supply method enable it easy to deployment OS3 supports 12V 1A Passive PoE and 12V 1A DC power supply option. It helps the engineer to deploy the device flexiblely. OS3OS3

Auto-bridge technology enable it to easy setup OS3 supports auto-bridge technology, It enables the CPE or basestation in factory default settings to connect to each other automaticaly after the device is powered on. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.

[Powerful Outdoor Wireless Kit] Includes two high-performance ENH500v3 wireless access points for long-range outdoor connectivity.

[Extended Range and Speed] Provides up to 867Mbps wireless speeds and covers distances of up to 5 miles, ideal for outdoor applications.

[TAA& NDAA Compliant] TAA compliant is critical for GSA Schedule contractors to each product and service offered under their contract. NDAA prohibits the use of equipment manufactured by a limited set of Chinese manufacturers.

Strong Signal & Large Coverage: 4 independent high-performance FEM provide wider coverage, stronger penetration, 5400sq.ft high-speed network coverage.

802.11k/v/r seamless roaming: When moving within the coverage area, device automatically connects to the AP node with best signal.

AX3000 Wi-Fi 6 Speed: With the new generation WiFi 6 technology, I29 supports 160MHz bandwidth and dual-band concurrent wireless rate of up to 3000Mbps, enhance experience of 4K ultra-HD videoconferencing.

【AC1200 Outdoor WiFi Extender】Complies with IEEE 802 11 ac/a/b/g/n standards. Dual-Band maximum speed up to 5GHz 867Mbps and 2.4GHz 300Mbps.With a brand-new chip MT7621A and Easy Mesh supported, it lets you keep more devices(64~96) connected simultaneously with the dual bands and enables Wavlink mesh router/AP/repeater to work together, which is superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.

【Multiple Operation Modes & Power Over Ethernet】WN572HP3 supports Mesh Extender Mode, Access Point (AP) Mode, and Repeater Mode. Integrated Power over Ethernet (PoE) supported, allowing it to be installed in areas where power outlet is not available by combing your power and network data connection into a single RJ-45 cable; Dual Gigabit (1000Mbps) LAN/WAN Ethernet Ports---support 10/100/1000Mbps speeds, 10x faster than a standard Ethernet port, giving you an excellent network speed experience.

【Weatherproof Outdoor WiFi Extender】IP65-rated weatherproof & heat-resistant case that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions.Note: The PoE part of the router is not waterproof.

Up to 300Mbps Wi-Fi with 2x2 MIMO technology ; Rate limit on per SSID to restrict the bandwidth of each client

Built for outdoor Wi-Fi applications ; WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN

High transmission power and high gain antennas provide a long-range coverage area

Add long range, high speed 300Mbps MIMO wireless access to your existing network

Add 4 wired ports for connecting additional computers, printers and other network devices

Install anywhere with the convenience of Power over Ethernet

Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outdoor Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.

PTMP Pre-programmed: The installation of this Wi-Fi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully.

Using 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network Wi-Fi access.

✅【SAY GOODBYE TO WEAK WIFI SIGNAL】- Resolve the problem with a weak signal in an excellent manner, and help to boost your Wi-Fi signal strength. It lets you keep more devices connected at the same time with the dual bands, which is superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.

✅【WITHSTAND HARSH OUTDOOR CLIMATES】- IP65 rated weatherproof & fireproof environmental ABS case with a continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F) and 15KV ESD, 4KV lightning protection, ensures your stable connection in the harsh outdoor conditions.

✅【CURRENT 2.4GHZ AND 5GHZ HIGH TRANSMISSION POWER】- Supports the 802.11AC Wi-Fi standard, which is 3 times faster than Wireless 802.11N. A dual band range extender can boost your existing wireless coverage with speed up to 433Mbps on 5GHz, 150Mbps on 2.4GHz. Adopting dual MTK 7688A+7610E chips ensure a more stable performance.

Up to 300Mbps Wi-Fi with 2x2 MIMO technology ; Rate limit on per SSID to restrict the bandwidth of each client

Built for outdoor Wi-Fi applications ; WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN

High transmission power and high gain antennas provide a long-range coverage area

📶[Point to Point Wireless Bridge]: CPE550 is a 5.8G long range WiFi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability. The 5.8G outdoor wireless bridges is capable of sharing internet to remote location up to 3KM (Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process. It is a simple, easy and professional way for long range wireless coverage, data transmit, wireless monitoring.

🏠[Easy Installation]: Pre-configured WiFi network extender with ethernet port with build in 14dBi panel antenna, the transmit/receive (point to point) wireless distance more than 3KM meters. Suitable for long range video transmission point to point WiFi cover, it supports Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode, no need setting, it can work two unit at the same time, no need long cable for connect to camera with your PC

🌐[Long Range Transmission Distance]: Up to 3km, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house. The point to point bridge outdoor is a cool WiFi access point extender. Share the same network with your garage, barn, stable, warehouse, shop ect.

High power, Long range and multiple floor penetration

Dual-band operation

Converts housing

ENH200 is a long-range outdoor wireless Client Bridge/ Access Point that operates on 2.4GHz frequency spectrum and provides high wireless data rate up to 150Mbps.

High-output power up to 26 dBm delivers superior range and coverage

Fully interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices

🌐100Mpbs Bridge: Wireless bridge kit has 2 100Mbps RJ45 port, the wired network speed up to 100 Mbps. The transmission rate between the two wifi bridges is up to 300Mbps, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible

🌐Up to 3KM : High gain 14 dBi integrated directional antennas built into the device extends networks up to 3 KM. The actual application transmission distance should be less than 3KM (barrier-free). A few trees will not reduce the transmission speed of CPE

🌐Plug and Play: CPE402 is powered by a 24V Poe adapter(included) and supports dial pairing without entering the GUI. The bridges are pre-configured, just connect the Poe power supply to achieve automatic pairing of the two bridges. It not only can help extend your home's network to the second building but also can be used for monitoring

Do you need to extend Wi-Fi outside? Wavlink brings an excellent outdoor wifi wireless extender with a lot of flexibility and advanced features, making it ideal for extending WiFi signal to long range. Perfect for big area, large house, farm, garden, garage, backyard, street...

Super-fast Dual Band Performance: Dual-Band maximum speed up to 5GHz 867Mbps and 2.4GHz 300Mbps, an upgraded version of AC1200(1200Mbps); The next generation of Wi-Fi, complies with IEEE 802 11 ac/a/b/g/n standards. With a brand-new chip MT7621A , it lets you keep more devices(64) connected simultaneously with the dual band, which is superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.

Withstand Harsh Outdoor Environment: IP65-rated weatherproof & heat-resistant case that ensures continued operation on harsh outdoor environments or in climates of extreme cold, heat or continuous moisture, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions.

WiFi 6: Up to 3x faster speeds than WiFi 5. 2x capacity - connect up to 100 devices at the same time

QUICK & EASY SETUP: Get your network up and running in minutes. Simple, yet powerful management from anywhere using the Meraki Go mobile app or web portal

SECURE & RELIABLE: Business-grade security that blocks malicious websites, malware, phishing, and other harmful threats. Stay connected and productive with devices powered by Cisco

2.33Gbps wireless throughput and 2x Gigabit wireline ports

Support 200+ concurrent Wi-Fi client devices

Embedded controller can manage up to 50 local GWN series APs; GWN. Cloud offers unlimited AP management

POINT TO POINT BRIDGE:2 10 dBi Outdoor PoE Access Points with wireless N300 point-to-point networking (2.4 GHz)

PRECONFIGURED KIT: 2 x Preconfigured Wireless N access points. Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit

POE POWER ADAPTER: Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m (197 ft.)