Best Mikrotik Access Points in 2026

The home Access Point lite (hAP lite TC) also known as RB941-2nD is an ideal little device for your apartment, house or office

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access

The device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others

Ceiling Access Point - RouterBoard cAP AC-US

Dual-band 2.4 / 5GHz

The cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The hAP ac² RBD52G-5HacD2HnD-TC is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time.

Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration.

New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case).

5 x 10/100Mbps Ethernet ports (PoE output on port 5),

RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access

The home Access Point lite (hAP lite) can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button

The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile

You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you

It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device

The hAP mini is a small 2GHz wireless access point for home or small offices.

The hAP mini (RB931-2nD) has three ports, which are configured as one Internet port and two LAN ports, but can be reconfigured as desired, using the powerful RouterOS configuration options.

The powerful 650MHz CPU gives you full access to the wide variety of features provided by the versatile RouterOS operating system, but if all you want is a simple access point - it is already configured out of the box. You simply need to open it’s web configuration page and provide a password for it.

It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and an SFP cage, for connecting active or passive

The wAP ac also known as RBwAPG-5HacT2HnD is a small weatherproof wireless access point for your mobile devices, perfect for installation where you need wireless access from your phone or computer

It has one Gigabit Ethernet port, it supports 802.11a/b/g/n/ac wireless protocols working both 2.4GHz and 5GHz frequencies simultaneously

The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it’s mounting location

The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities

It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack

The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it

The hAP ac lite (RB952Ui-5ac2nD-TC) is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5)

Dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license

The cAP lite also known as RBcAPL-2nD is a tiny access point device with a clean and simple design which will blend into any environment

Perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. where you can easily place it out of sight, or customise it’s looks

Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer friendly design files

The home Access Point lite (hAP lite TC) also known as RB941-2nD is an ideal little device for your apartment, house or office

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access

The device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others

The ceilingThe new design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow increasing the covered area by up to 100%, compared to the previous cAP models!AP on steroids! Compared to the previous cAP models, the improved high-gain antenna increases the covered area by up to 100%!

The dual-band, dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it, so you don’t have to worry about the placement of the device so much.

Even though the radio supports repeater mode, the two Gigabit Ethernet ports give you the ability to extend your network with cables, even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.

Fast internet speed:The next generation of Wi-Fi, complies with IEEE 802 11 ac/a/b/g/n standards. Dual-Band maximum speed up to 5GHz 867Mbps and 2.4GHz 300Mbps, upgraded version of AC1200(1200Mbps)

Multiple Operation Modes : Outdoor WiFi Repeater supports Router Mode, Access Point Mode(AP) and Repeater Mode. Multiple modes meet most of your demands.

Power Over Ethernet : Integrated Power over Ethernet (PoE) supported, allowing it to be installed in areas where power outlet is not available by combing your power and network data connection into a single RJ-45 cable

The wAP is a small weatherproof wireless access point for your mobile devices

The wAP is perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The wAP RBwAP2nD has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek

CPE520 is a 5.8G Long Range WIFI Extender Outdoor Wireless Bridge CPE with an LED display. Point-to-point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, and make the long-range, wireless coverage, data transmission and wireless monitoring simple and professional.

100Mpbs digital display bridge, transmission/ receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. Deep protocol optimization for wireless video surveillance, and the underlying wireless driver is optimized in-depth, with stronger anti-interference ability and better stability.

Adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards (FCC). Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APST), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable.

RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP

Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc

cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location

The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings

The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it

Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output (up

The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration.

New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

hAP ac² (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). International version can be used only outside the country or with authorized license

The wsAP ac lite is a perfect access point (AP) for hospitality networks (hotels, shopping malls, hospitals, airports etc.)

The wsAP ac lite has an unobtrusive case that fits in standard wall power sockets. This way, the unit doesn’t attract attention and blends into any environment

The wsAP has three Ethernet ports: one on the back side for easy PoE-in, and two LAN ports behind the front door

RBSXTG-5HPnD-SAr2-US is a low cost, high speed 5GHz outdoor wireless sector access point

It has a 90 degree antenna to provide a wider coverage than our previous SXT units

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes

The Metal 52 ac supports 2.4 GHz, 5 GHz and all the legacy wireless modes as well (802.11 b/g/n for 2.4 GHz and 802.11 ac/n/a for 5 GHz)

The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless

The Metal comes with an AP software license, so you can attach your favorite antenna to use it as an AP, to make wireless point-to-point links or as a CPE

The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach. Unit comes with Type A power plug

Especially useful in homes with thick walls, where you can extend Wi-Fi coverage to those rooms, where signal is poor, without having to re-wire your house.

Simply plug this device directly into one of the LAN ports of your MikroTik router, and add another one somewhere further in your premises.

The LtAP mini is a small weatherproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot, so you can use your own LTE modem of your choice

The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging

The unit has several powering options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB

The wAP 4G kit s a small weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity

Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device

The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices

The LtAP mini LTE kit is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands

Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device

The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.

EASY TO SET-UP AND MANAGE: Outdoor WiFi cloud managed access point with simple management from anywhere using the Meraki Go mobile app; easily add multiple admins to help manage your networking equipment

FEATURES FOR BUSINESSES: Create guest WiFi with a tap, a custom splash page in seconds, or use guest insights to better engage with customers

PEACE OF MIND: Remote visibility, troubleshooting tools, and alerts with the Meraki Go mobile app

This optional flush mount sleeve installs around Instant On AP22 Access Points to bring the install tight and neat to the mounting surface.

Winner of CRN’s 2021 SMB Product Of The Year | Security: Two-Factor Authentication enabled