Best L Airsoft Helmets in 2026

★★★ NOT suitable for big head!!!!! Hat size: 59 //Internal width: 6.69" (17cm); Internal length: 8.66" (22cm)

★Light weight: 700g /easy-carrying

★Include sliding goggles / Adjustable chin strap. ( It is not recommended to wear glasses under the visor )

Accessory rail connectors provide attachment points for quick attach or release, such as flashlights,camera ,visor...etc.

7 pieces of self adjustable sponge padding inside, make your wearing more comfortable

Loop panels around, provide extra place to unique your helmet with patch attachment

➀ Package includes 1* Airsoft Helmet and a set of tactical helmet accessories, 1* Foldable Half Face Mesh Mask which can protect your ear and lower face. Come with 9 pieces of high-quality self-adjustable sponge padding inside and High-quality adjustable H-Nape Helmet Chin Strap to make you feel comfortable when wearing for a long time. It's also great for many outdoor tactical airsoft activities.

➁ Helmet size: 54~63/ M~L/ Head circumference about 21-25inch (Adjustable H-Nape Helmet Chin Strap for best fitting). the size information is in the second product picture. Manual measurement, there may be a slight error.

➂ Come with a set of airsoft helmet Side Rails accessories which compatible with flashlights / Goggle and other tactical gear.

Package includes: 1X Fast Helmet, 1X Foldable mask, 1 XTactical Goggle

What is the MICH helmet material?Helmet body is a high quality ABS engineering plastics，7 pieces of self adjustable sponge padding inside.Weight: about 660g

Additional functionality:Side Rails / NVG Shroud, Bungee Retention for NVG，provide attachment points for quick attach or release ，For example,night vision device ，flashlights,camera ,visor， Strobe, Battery Pack...etc.Hook and Loop Panels provide extra place to your helmet with patch attachment ，such as Morale patch ,Blood type patch,IFF, Safety Lights, and Nametapes.

Note: Please check the size instruction carefully to make sure the helmet fits your head circumference. After you recive helmet and feel a little tight, please remove the mat from inside the helmet.

Size: Fit head circumference: Less than 23 inch(59 cm).

Material: Made of High quality ABS, weight about 1 lb.

PJ type helmet, made by high quality ABS.

Hard Polymer Construction-The helmet is Fit for the Person Who Head Circumference is 22.4-23.5in. Suitable for general head circumference or small head circumference, please purchase with caution if the head circumference is slightly larger.

Occ-Dial Adjustable Fit Band with Replaceable Leather Front, Nape, and Side Pads Quickly Detaches to Allow Convenient Donning and Doffing of COMMs Headsets with Internal Top Headbands.

Adjustable and Comfortable – adjustable chin strap to ensure NVG stability, repositioned modular thickened sponge mat pads for fully wrapped comfort

Protective & Durable – made of 2.5mm thickness lightweight and high strength ABS engineering plastics material, only 1.2lb, designed for airsoft, paintball, cs, and other outdoor activities

PJ Type Helmet Design - vents holes and a more streamlined geometry design to enhance airflow, breathable, comfort, fit, and water drainage

Lightweight design: Easy to carry and grow less fatigued. It can provides users protection during indoor/MOUT/CQB environments in addition to guarding against BB hits at medium to extreme close range.1

Rail System & Velcro :Side Rails fit a variety of tactical accessories and has been fixed with helmet body.NVG Shroud, Bungee Retention for NVG; Velcro Panels Allow Fitment of Patches.Most users commonly mount POV Cameras, lights/illuminators, battery box, IFF Markers (identification friend or foe), Helmet Cover.

Suitable for head circumference 22"-26" inch.(please note this important size information before place an order).Adjustable suspender straps and chin/neck pad for fitting.

100% Brand New

Material: Constructed by high quality Nylon material,Designed for MICH 2000

Weight: 145g,Exquisite workmanship

EXCELLENT MATERIAL : Idogear helmet cover is made of 500D nylon fabric with teflon coating , it has high quality water resistance and dust-proof performance in different tactical environments. All parts precision sewing and tight combination. Lightweight and durable, fast drying and no fading.

WONDERFUL DESIGN： This helmet cover is perfect for NVG system. It can be a battery pouch or a counterweight storage pouch to carry your accessories to balance your helmet. The MK2 helmet battery pouch is sewd in the tactical helmet cover and not removeable. It can stick on the helmet with hook-and-loop panel. Designed with the shaped slot for night vision mount. Hoop and loop panel in the center for morale patches. Also with cross-bungee cords for organize the cable.

EASY INSTALL AND GREAT ADAPTABILITY: There are enough hook-and-loop panels inside the helmet cover, install in seconds to your fast helmets. Easy loading and unloading. The helmet counterweight pouch is designed for carrying NVG battery case on all kinds of helmets, and also can be used as a accessories bag, cigarettes, cell phones, keys, etcs, which brings great convenience to outdoor activities.

✅Package Included :38 Pcs(2 Sets), Per Set Comes with 9 replacement helmet foma pads + 10pcs adhesive Hook&Loop circles.

✅Material: Material:Made of high quality non-toxic EVA foam, breathable soft and durable,provides maximum comfort and stability.Come with adhesive circles, easy installation and remove.

Used to replace the worn out or missing pads in your helmets.Making the helmet more comfortable for wearing. The replacement pads are approximately 0.4 inch/1 cm thick. Perfect for anyone that is trying to improve the fit of a helmet or other headgear and cheaper than buying a new helmet.

Upgraded Adjustable Airsoft Helmet: Unlike other helmets, our tactical airsoft helmet has an adjustable occipital dial so you will find the best position by adjusting the OPS button for a fit and comfortable fit. Adjustable suspenders and chin/neck pad for fit. Fits 20.3-24" head circumference.

Lightweight Design: The Helmet is about 1.24lb so you will grow less fatigued from carrying a helmet on your head and still retain the same amount of protection necessary for high-intensity outdoor activities. Come with replaceable foam pads that are comfortable for younger teenagers training and cycling.

Rail System & Velcro: Side Rails fit a variety of tactical accessories. NVG Shroud, Bungee Retention for NVG; Velcro Panels Allow Fitment of Patches. Most users commonly mount POV Cameras, lights/illuminators, battery boxes, IFF Markers (identification friend or foe), and Helmet Covers.

Made by high quality durable ABS engineering plastics, 9 pieces of self adjustable sponge padding inside, make your wearing more comfortable.

Adjustable suspender straps and chin/neck pad for best fitting. Fits for head circumference about 52-64cm (20.5-25.2 inch). PLEASE NOTE: make sure you can wear it before you buy it.

Loop panels around, provide extra place to unique your helmet with patch attachment.

✨Material:High Quality Nylon.Exquisite workmanship.

✨Weight: 50g/1.8oz.Lightweight, easy to carry and storage.

✨Designed for Fast Helmet.Only Suitable for FAST PJ helmet in size M/L and PJ/MH helmet in size M/L: Size - 16"x11"(40x28cm)

❄ 【Two airsoft ear protection covers】-- Easy to install on your tactical helmet with side rails.

❄ 【Perfect for airsoft/paintball game】 -- Provides additional coverage and environmental protection. Protects you from paintball and air-soft bb's.

❄ 【Detachable】-- Screws can hold the little slider and the ear cover in place. The ear cover sit tight in your helmet's rails. It is detachable when needed.

★Contents: 18pcs foam pads + 20pcs sticky adhesive sided strips.

★Foam Pads: Each pad is approximately 1/2 inch. Low density EVA foam. A dense foam. It is very safe, soft and durable. Not your average pads. These are thick and so comfortable. They aren’t the typical cheap foam but more like comfortable cushions. Comes with enough pads to find the perfect fit for you.

★Adhesive: Super sticky, they’re not going anywhere once placed that’s a super good thing because no one wants to lose a pad inside the helmet, they’re nice and cushioned as well to protect adequately from bumps and bruises. The adhesive parts are separate which actually makes installing and moving easier.

A dense memory foam,not easily compressed. Not your average pads. These are thick and so comfortable. provide enough comfort and the safety, cushioned as well to protect adequately from bumps and bruises.a thicker pads Perfect for when go to field exercise training in the army.

Material: Memory Foam Filling, Made of Non-toxic memory foam with sticky ring.Helmet Pads The outer high quality fabric is made of velvet, transparent plastic board TPU, rubber and plastic slow rebound memory foam. soft and durable, providing maximum comfort and stability.

Used to replace the worn out or missing pads in your helmets.the existing pad in your helmet makes the helmet more fit for comfort/tightness. to ease some pressure off your temples.

Material: Airsoft Tactical Bump Helmet, Lightweight, Durable impact resistance. Made by high quality durable ABS engineering plastics and nylon. High strength security equipment.

Size: One Size Fit Most. The back of the Helmet can be adjusted according to the Head Circumference. Fit for the most Person Who Head Circumference is 22.4-23.5in. Weight: About 1.85lb.

Loop panels around: Military Helmet Plenty of Velcro space on surface for your morale patches, can carry various of emblem, rescue flash-light and tactical accessories. Include large sized ventilation holes and Tactical Helmet EPP Memory Sponge Pad, provide you maximum comfort.

Material: 65% Polyester, 35% Cotton

Ideal for Concealment: Updated version with genuine multicam patterns help you camouflage from enemy observation

Very easy to install onto fast helmets, hook&loop on both head-sides & back for attachments

Ear Protection :Worry about a BB hit you in the ear?It will not happen again if you wear Metal mesh Side Cover with ear protectors ,Perfect for airsoft game. Provides additional coverage

Apply to FAST tactical helmets,Best suited for FAST tactical helmets with Head circumference adjustment adaptors Because this method of use is comfortable to wear

Easier to install than traditional Up-Armor Side Cover,Comfortable and breathable,It doesn't stop the sound,Allows you to quickly communicate combat commands

When you install the night vision goggles or other accessories on the airsoft helmet, using the Helmet Counterweight Pouch to maintain your helmet in balance. It must be installed behind the helmet.

This helmet battery pouch is made of 500D Nylon Fabric. All parts precision sewing and tight combination. Lightweight and durable, fast drying and no fading.

Tactical pouch attached to tactical helmet by hook-and-loop. Easy to attach and it can be a room to hold remote battery boxes for NVG’s. Or a pocket to carry your accessories or tools, also can be a counterweight pouch to balance your helmet.

This item includes only one color, not three

Total system weight 300g，Each of which counterbalance weight about 50g

Simple to install, unscrew the helmet two large screws, stacking screw

Material: 500D Cordura Nylon with great abrasion resistance.

Fits most standard sized FAST style helmets.

Loop patches on the top with cross-bungee cords provide lots of options for wire organization and patch space.

Reproduction US M1 Helmet US WWII

Brand new WW2 US helmet comes with webbing helmet cover and strap

Size of this helmet is fit for head circumference 55~61 cm

One size fit MICH 2000 Ver2/ACH helmet

Material: High quality Polyester cotton cloth

With both head-sides and back for attachment

100% Brand New.// Weight: 155g

Constructed of memory cushion foam.

Three-piece design, Easy to install and Remove.

★ Best Choice ★ >>> - The helmet fits for head circumference about 56-61cm (22-24 inch), and comes with a metal mesh face mask;Great protection for tactical activities/ airsoft/ paintball/ bicycling.

★ Adjustable ★ >>> - Adjustable suspender straps and chin/neck pad for fitting, you can find the suitable size.

★High Quality ★ >>> - Made by High Quality ABS, and 7 pieces of self adjustable sponge padding inside, its Weight about 700g.

Quick & simple attachment

Fits most helmets

High quality polymer buckles

Size and Material: 12.6*9.6 inches and weighs about 0.2 lbs. The helmet cover is made of 501D nylon which is soft to the touch, scratch resistant and durable. Waterproof and antistatic in most tactical environments.

Design: The cross-bungee cords design on the top of the helmet cover reinforces the accessories that need to be installed on the helmet and prevents the accessories from falling and losing. The inner side of the helmet is designed with Velcro, which makes the installation more convenient and quick.

Instructions for use: First remove the hook of the nylon rope on the front rail of the helmet, then align the helmet cloth with the multi-function device converter, put it on the helmet, and pull the hook at the same time. Then flip it over to the inside of the helmet, remove the bumper, and insert the velcro of the helmet cover between the seat cushion and the helmet. Finally, stick the Velcro on both sides and the back of the helmet in order, and you can wear it.

Weight: 72g

Color: Gray

Material: High glutinosity sticker