Best Desert Airsoft Helmets in 2026

★ NOT suitable for big head!!!!! Fits for head circumference about 59cm (23 inch)or below

★Internal width: 6.69" (17cm); Internal length: 8.46" (21.5cm).Please check the image on the left side

★Made by High Quality ABS, Light Weight: about 550g

Package includes: 1X Fast Helmet, 1X Foldable mask, 1 XTactical Goggle

What is the MICH helmet material?Helmet body is a high quality ABS engineering plastics，7 pieces of self adjustable sponge padding inside.Weight: about 660g

Additional functionality:Side Rails / NVG Shroud, Bungee Retention for NVG，provide attachment points for quick attach or release ，For example,night vision device ，flashlights,camera ,visor， Strobe, Battery Pack...etc.Hook and Loop Panels provide extra place to your helmet with patch attachment ，such as Morale patch ,Blood type patch,IFF, Safety Lights, and Nametapes.

PJ type helmet, made by high quality ABS.

Hard Polymer Construction-The helmet is Fit for the Person Who Head Circumference is 22.4-23.5in. Suitable for general head circumference or small head circumference, please purchase with caution if the head circumference is slightly larger.

Occ-Dial Adjustable Fit Band with Replaceable Leather Front, Nape, and Side Pads Quickly Detaches to Allow Convenient Donning and Doffing of COMMs Headsets with Internal Top Headbands.

Adjustable and Comfortable – adjustable chin strap to ensure NVG stability, repositioned modular thickened sponge mat pads for fully wrapped comfort

Protective & Durable – made of 2.5mm thickness lightweight and high strength ABS engineering plastics material, only 1.2lb, designed for airsoft, paintball, cs, and other outdoor activities

PJ Type Helmet Design - vents holes and a more streamlined geometry design to enhance airflow, breathable, comfort, fit, and water drainage

Note: Please check the size instruction carefully to make sure the helmet fits your head circumference. After you recive helmet and feel a little tight, please remove the mat from inside the helmet.

Size: Fit head circumference: Less than 23 inch(59 cm).

Material: Made of High quality ABS, weight about 1 lb.

100% brand new and high quality.

Constructed by high quality canvans material.

Material: canvas, Head circumference: 56-59cm

➀ Package includes 1* Airsoft Helmet and a set of tactical helmet accessories, 1* Foldable Half Face Mesh Mask which can protect your ear and lower face. Come with 9 pieces of high-quality self-adjustable sponge padding inside and High-quality adjustable H-Nape Helmet Chin Strap to make you feel comfortable when wearing for a long time. It's also great for many outdoor tactical airsoft activities.

➁ Helmet size: 54~62/ M~L/ Head circumference about 21-24inch (Adjustable H-Nape Helmet Chin Strap for best fitting). the size information is in the second product picture. Manual measurement, there may be a slight error.

➂ Come with a set of airsoft helmet Side Rails accessories which compatible with flashlights / Goggle and other tactical gear.

Material: 65% Polyester, 35% Cotton

Ideal for Concealment: Updated version with genuine multicam patterns help you camouflage from enemy observation

Very easy to install onto fast helmets, hook&loop on both head-sides & back for attachments

What is the material of the mask and helmet? Fast Helmet material：Tactical helmet are made of new ABS engineering plastics.Strong impact resistance, not easy to damage, durable. Folding mask material： airsoft mesh mask are made of low-carbon steel, it can offer best protection, The airsoft mask can be gently bent to fit your face better; air ventilation prevent fogging

Practical NVG Mount: At the front of the helmet,Embedded Night Vision mount is perfect for those looking to affix their Night Vision system,It's your camping trip. It's an essential thing for CS game

Multi-functional side rails:The rail connectors on both sides of the helmet.provide attachment points for quick attach or release, such as Night vision battery box.Tactical earmuffs， headset holder, flashlights,camera ,visor etc. In the middle of the rail, there is a goggles buckle,Used to connect the goggles strap

When you install the night vision goggles or other accessories on the airsoft helmet, using the Helmet Counterweight Pouch to maintain your helmet in balance. It must be installed behind the helmet.

This helmet battery pouch is made of 500D Nylon Fabric. All parts precision sewing and tight combination. Lightweight and durable, fast drying and no fading.

Tactical pouch attached to tactical helmet by hook-and-loop. Easy to attach and it can be a room to hold remote battery boxes for NVG’s. Or a pocket to carry your accessories or tools, also can be a counterweight pouch to balance your helmet.

★ Best Choice ★ >>> - The helmet fits for head circumference about 56-61cm (22-24 inch), and comes with a metal mesh face mask;Great protection for tactical activities/ airsoft/ paintball/ bicycling.

★ Adjustable ★ >>> - Adjustable suspender straps and chin/neck pad for fitting, you can find the suitable size.

★High Quality ★ >>> - Made by High Quality ABS, and 7 pieces of self adjustable sponge padding inside, its Weight about 700g.

Materia: polyester , Patch size: 2"x3"

Gain concealment when using the helmet in different terrain

Velcro webbing on both side for adjustment and fixation

Made from durable nylon ripstop fabric

Ideal for Concealment

Very easy to install onto fast helmets, hook&loop on both head-sides & back for attachments

Advanced airsoft Helmet--- It is made from very strong ABS engineering plastics with the advantages of safety, solidness, and durability. These plastics are much thicker than what you see on the other cheap version. Good padding inside. As for the shell, it is very durable.

Adjustable Head Size ---The fixed knob on the army airsoft helmet can easily be adjusted to better fit any airsofters with a bigger head. You can wear this paintball helmet for hours during airsoft and your head will not get sore. Comfortable, easy to wear, and almost perfect padding.

Modular design--- Comes with protective cushions and velcros for the suspension system.Easy to assemble. Has arc guide rail system on the sides for mounting helmet accessories such as goggle strap clips, flashlights, NVG shroud, camera, headsets, safety lights, and nametapes.

OneTigris Helmet Cover ZKB09: It fits for Ops-Core High-Cut helmets （XR, LE, etc.）in size M/L or L、 Ops-Core Bump helmets in size L/XL or XL、 FMA Thick FAST style helmets in M/L、 FMA Regular FAST style helmets or bump helmet in L/XL

Gives Helmet A Tactical Look: Dull nylon and Four-way Stretch Material removes natural luster from your helmet.

Helmet Camouflage Cover: Easy to attach and easy to remove without having to screw loose NVG mount and side rails

Material:PJ type helmet, made by high quality ABS;High Quality Construction for Head Protection.

Hard Polymer Construction:Internal width: 6.69" (17cm); Internal length: 8.46" (21.5cm);The airsoft helmet is Fit for the Person Who Head Circumference is about 22.4-23.5in.

Lightweight Design: Light weight about 550g,Lightweight, multi-impact, ventilated liner with repositionable impact pads and Holes for ventilation;Adjustable suspender straps and chin/neck pad for fitting. Helmet is a lightweight, fully adjustable helmet perfect for just about any outdoor Applications.

★ ABS material, thickness is 4.5mm, weight is 665g

★ The size is 27 * 23.5 * 17cm, suitable for 56-61cm (22-24inch) head circumference,

★7 pieces of self adjustable sponge padding inside, make your wearing more comfortable.Adjustable suspender straps and chin/neck pad for best fitting

【Best Size】: PJ type helmet is suitable for people with head circumference of 54-62 cm (21-25 in). Adjustable suspenders and chin/neck pad for the best fit. Suitable for most adults.

【DURABLE, LIGHT AND COMFORTABLE】: Airsoft helmets are made of high quality ABS engineering plastic + EPP shock-resistant foam + Velcro + Nylon. Full use of high-quality foam inside the helmet, lightweight and comfortable.

【Practical Design】: Adjustable suspension system for quick wearing and dismounting of the helmet. The ear protectors are extended on both sides of the helmet to effectively prevent ear damage during activities.

High-quality materials: The helmet is made of engineering ABS plastic, which is resistant to wear. The mask is made of TPE+ABS plastic. The goggles frame is made of thermoplastic polyurethane and elastic rubber (TPU), and the lens is made of PC material.

Adjustable design: suitable for head circumference 52-64 cm (20.5-25.2 inches). The goggles and mask are equipped with fixers, which can be adjusted according to different guide rails to achieve a more stable effect.

Multifunctional design: multiple Velcro panels on the outside of the helmet can load multiple devices (for example: survival lights, morale patches). Practical side rail/goggles band clips and NVG brackets provide quick connection or release connection points, such as night vision systems, tactical earmuffs, flashlights, sports cameras, etc.