Best Metal Amplifier Speakers in 2026

Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.

Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.

Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.

Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 700W. Stereo 4 Ohm: 2 x 1000W. Bridged 8 Ohm: 1 x 2000W. Peak Power Output: Stereo 4 Ohm: 2 x 3500W Max. Bridged 8 Ohm: 1 x 7000W Max. Terminals: Input Terminals: Combo jack (XLR and ¼”) A & B inputs. Output Terminals: Banana binding post speaker output. Speakon output. XLR output to connect another amplifier or powered sub

Rockville RPA14 7000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier. LCD displays volume in dB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration

Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears. Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity

Rockville RCS350-6 350 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth

Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver Capable of 70 volt 100 Volt 8 ohm and 4 ohm 70/100 volt RMS power 184 watts 6-Zones – each zone has a separate volume control Built in Bluetooth Audio streaming Fm radio tuner Usb input to play audio stored on a thumb drive (32GB max)

Sd card slot to play music stored on an SD card (32GB max) separate volume control for Mic1 Mic2 Mic3 MP3 line1 line 2 and MP3 Echo control for the mic inputs with speed and repeat adjustments Built in clipping limiter to protect the amp and speakers Bass and treble control. Detachable euro-block speaker output terminals for easy installation. Chime button for making announcements Top quality aluminum panel with industrial grade knobs 5 segments signal level indication

Rockville RPA5 400w RMS (200 x 2) 2 Channel Professional/DJ Rack Mount Amplifier. 2U rack space.

Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers.

Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers. Channel A & B Clipping Led Indicators.

Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space

Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers

Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers

Rockville G-AMP 20 Watt Guitar Amplifier with Dual Guitar Inputs and Bluetooth and Delay Effect.

6.5” speaker with 20 Watts RMS power. Controls: Master volume, treble, mid, bass. Delay effect .

2 channel Clean/Overdrive. Dual ¼” guitar inputs so you can jam together with your friends.

Rockville RPA60BT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer.

19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. RMS Power @ 4 Ohms: 125w x 2. Peak Power @ 4 Ohms: 500w x 2.

RMS Power @ 8 Ohms: 100w x 2. Peak Power @ 8 Ohms: 400w x 2. THD: > 0.1%. Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB.

Rockville KRYPTON F2 2400w Peak/600w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp.

Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 150 Watts x 4 Channels <1% THD+N. 4 Ohm: 100 Watts x 4 Channels <1% THD+N.

4 Ohm Bridged: 300 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 600 Watts x 4 Channels. 4 Ohm: 400 Watts x 4 Channels. 4 Ohm Bridged: 1200 Watts x 2 Channels.

What's in the Box: Matrix Amplifier. Remote. Detachable Rack mount ears. Power Cable. Owner’s manual. Warranty

Rockville HOME MATRIX 4 Zone 8 channel 600w RMS Multi Room/Multi Source Receiver/Amplifier. 600 Watts Total RMS @ less than 1 % THD (75 Watts RMS per zone x 8 Zones). Route Any Sources to Any Zones. Includes a remote with zone source and zone volume controls. Supports 4-8 ohm speakers. Bluetooth playback with quick phone connection and long range. USB input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). RCA line input. Optical input.

Coaxial input. Built in FM radio. RCA output on each zone (4 sets total). 8 sets of amplified speaker outputs. 2 Mic inputs will play on all zones . Master volume control knob. Source selection on each zone . Bass, treble, and volume control on each zone. Mic inputs have volume control, bass, treble, echo, and delay controls. 19" rack mountable (removable rack brackets). MIC priority button will lower the music when talking into the mic when priority is activated.

Features of RPA70WBT: RockvilIe RPA70WBT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer with 2 Wireless Microphones, 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver, RMS Power @ 4 Ohms: 125w x 2, Peak Power @ 4 Ohms: 500w x 2, RMS Power @ 8 Ohms: 100w x 2, Peak Power @ 8 Ohms: 400w x 2, THD: > 0.1%, Input Sensitivity: 400mv/33 KOhm

Frequency Response: 20 Hz - 20 kHz, Signal to Noise Ratio: 80 dB, Tone Characteristic: 100Hz-10KHz ±12dB, 110v/220v Switchable, Front Inputs: 3.5MM front aux input, 1/4” Headphone Jack, (2) 1/4" Mic Inputs, USB Input, Optical, Rear Inputs: RCA, Optical, Coaxial, Rear Outputs: Preamp output for an external additional amplifier or powered speaker, Sub preamp output to connect a powered subwoofer or an amplifier

Record output to mixer, Includes 2 wireless mics with digital display and on/off switch (very high quality mics. Significantly better then our V1 mics), Record output to connect a recording device, Bluetooth Capable, Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B), Built-in Pre-Amplifier, Bass, treble, and balance control knobs

Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp

Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration

Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s). channel a & B clipping LED indicators. Channel a & B separate level controls. Power, Signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles

Rockville RCS80-1 60 Watt 70V commercial restaurant amplifier/Receiver with Bluetooth;

Rockville RCS80-1 60 Watt commercial/restaurant amplifier 19" Rack-mountable (removable rack brackets) digital hybrid amplifier/Receiver. Capable of 70 volt, 100 Volt, 16 ohm, 8ohm, and 4 ohm. 70/100 volt True RMS power: 60 watts. 4 ohm RMS power: 80 watts.

8 ohm RMS power: 70 watts. 16 ohm RMS power: 11 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max). SD card slot to play music stored on an SD card (32GB max).

Package Includes: (1) MB Quart FA2-400.4 400 Watt 4-Channel Car Stereo Amplifier Class Q1 Amp, (1) Rockville RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's

Features of FA2-400.4: Low Noise Preamplifier Circuit: Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion. RCA Inputs: Nickel Plated: High temperature impact resistant nickel-plated RCA inputs that allow for secure connections and is erosion resistant. High Level Inputs: DC SIGNAL SENSE: The DC SIGNAL SENSE switch will allow the amp to turn on when a signal is received on the RCA inputs,

so an amplifier remote turn on wire is not needed to turn on the amplifier. This feature can also be turned off. Operation Mode: 4 channel operation mode allows either stereo or mono bridged operation. Crossover Type: Variable electronic crossovers allow for complete control of the sound. Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier

Rockville RCS180-6 180 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth

Rockville rcs180-6350 watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 4-16 ohm binding post speaker output.

6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max).