Best Automotive Alignment Tools in 2026

[BENEFITS] This wheel bolt pilot pin guide tool makes it easier for you to mount wheels and tires by lining up the lug holes of the wheels to the hub so you don't have to worry about balancing the wheels between your knees as you're trying to bolt them up to your car. Knurled end ensures a tight grip during installation and removal.

[MANUFACTURING] Our custom wheel hangers are manufactured with strong cold forged metric grade 10.9 carbon steel. Additional Heat Treating ensures dependable strength, durability, and performance. Machine precision threads ensure the best fit onto your vehicle's hub. Special zinc coating provides ultimate corrosion, rust, and scratch resistance.

[FITMENT] Vehicle's hub MUST be 14x1.5 thread size. Compatible with BMW, Audi, Volkswagen, Mercedes, Porsche, and other European vehicles with 14x1.5, 14mmx1.5, M14x1.5, 14x1.5mm bolts. Please see the description for a list of years, makes, models. Works on any factory and aftermarket wheel with lug holes larger than 14.2mm diameter.

Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain.

Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682

Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store.

Easy to read and convenient to operate

There are super suction, two positioning blisters

Suitable for accurate checking of the castor and camber angle

FOUR TON CAPACITY- Each turnplate supports up to 2 tons of weight capacity, allowing up to 4 tons of weight when used in pairs.

PRECISE ALIGNMENT- The beautiful brass finish dial with readings up to 60 degrees left or right from centerline allows for precise alignment.

OFFSET SLIDE TOLERANCE- The 13-3/8" top rotating plates allow a 1" slide tolerance from centerline, perfect for wheels that move when turning.

OEM EQUIVALENT: This OMT automotive tool set slots in perfectly to hold your camshaft firmly in position at top dead center just like OEM No. 303-465, 303-574 (21-163), and 303-507 (21–210), making it easy for you to adjust your timing belt, valve cover gasket, and more

QUALITY MATERIALS: These camshaft alignment tools are made from aluminum and 45# structural steel to provide you with maximum strength and endurance

SUPERIOR DURABILITY: Our steel timing pins have been galvanized and treated with black oxide for corrosion resistance and longevity superior to the competition

15 inch steering wheel tool used for fixing steering wheel position, fits for most of auto

The steering wheel alignment tool can be adjusted the height by pressing the locking switch, more convenient to use

Steering wheel holder tool has a loaded spring to fit a wide variety of , trucks etc.

This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle

Top Quality: KIPA Wheel Alignment tool is made of solid Alloy, Well-CNC machined, Accurate and durable must-tool for wheel alignment adjustment.

Universial Automotive Tool For Wheel Alignment, Easy to use, Save you a lot of cost, You could Do the alignment works at home easily.

Fits : 100% Fitment Guaranteed ✔️

Fits : 100% Fitment Guaranteed ✔️

Material : Manufactured From The Highest Quality Steel–Heat Treated For Superior Strength ❗

Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool

Restores functionality - do the job right the first time with the right tool

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Size: approx. 12.7 x 5cm/ 5" x 1.97" (L*D) Material: metal

Measure the Camber and Caster angle on the wheel hub or brake disc，Suitable for accurate checking of the castor and camber angle， toe angle.

Has a simple leveling adjustment from -5 degrees to 5 degrees，Magnetic gauge attaches to the hub or disc brake

Universal automotive tool for wheel alignment, caster camber gauge compatible with BMW, Benz, Chevrolet, Toyota, Honda, Jeep, Citroen.

This Wheel Alignment Balancing Tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.

The alignment gauge is suitable for accurate checking of the castor and camber angle. Measures the camber and caster angle on the wheel hub or brake disc. Also, this magnetic camber alignment gauge could be used as a normal gradienter.

Measurements are taken from the wheel rim itself, NOT the tire like other toe plates.

Package includes 2 high resolution tape measures with 1/32in increments

Degree alignment specs can be used thanks to the attached degree to inch conversion chart

This set allows for easy removal of fan clutches when repairing or replacing water pumps, timing chains or fan clutch

Also useful when installing or removing engines, and for a variety of other engine service projects

Hold the fan clutch with the clutch holding tool while using the correct wrench to turn the fan clutch nut

Magnetic gauge the Camber and Caster angle on the wheel hub or brake disc

Suitable for accurate checking of the castor and camber angle

Has a simple leveling adjustment from -5 degrees to 5 degrees

【Accurate Measurement】Measures the Camber and Caster angle on the wheel hub or brake disc. Attach the magnetic gauge to the hub or disc brake,suitable for accurate checking of the castor and camber angle Wheel Alignment tool".

【Adjustable Gauge】Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.

【Multi-Function】The magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces.Also it could be used as a normal gradienter.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)

PREMIUM QUALITY: Quality is our foremost priority! Constructed with galvanized steel with a rigid EMT thickness, our pipe straps are sturdy, strong and reliable. Besides, we have a strong resistance to salt, rust and corrosion. Our pipe straps are featured with a reinforced hole and reinforced rib for extra strength.

EXCELLENT FIT: Are you feeling irritated at using old steel pipe straps? The solution is here to make your work easier. This strap takes less time to complete each task as the design of these EMT pipe straps can easily secure all EMT conduits. The zinc-plated steel is corrosion resistant and each pipe strap is cULus listed.

IDEAL CHOICE: Stands for the tests of time! Engineered with innovative foldable features, it is used in fixing pipes to various supporting structures, also in securing hoses, pipe, cable, tube, fuel lines, instrumentation pipe card, etc. Perfect to use in automotive, industrial, boat/marine, shield, both indoor or outdoor applications.

【Excellent Value for money】 + 【Enhanced Car Diagnostic Tool】: IF742 car diagnostic tool is enough to meet most of your needs. Only need 100+ dollars!!!💸💸 You can get a 4 enhanced systems diagnostic too--ABS/SRS/engine/transmission, and extra 6 hot reset fuctions!!!🎉🎉 The diagnostic function is free for lifetime! You don't need to spend 300+ dollars to buy other diagnostic tool. IF742 OBD2 scanner diagnostic tool is very easy to operate and friendly to both novice and amateur mechanics.

【2022 New Version】+【Powerful 6 Reset Functions】 This obd2 scanner has 6 reset functions, which can help you to reset the oil light and thorret, ABS,SAS,EPB,BMS. These functions are enough for your needs. You don't have to buy OBD2 scanner diagnostic tool with 10+ services with 300-500 dollars. IF-742 can help you perform a more in-depth diagnosis of your vehicle and respond to accurate data within minutes. Compared with car repairs, car code readers can save some unnecessary repair costs.

【Specially Designed 7 " Extra Large Screen】(Non-touch screen) The 7 " extra large screen OBD2 scanner diagnostic tool. Make your reading easier and more comfortable. Free your eyes from the cramped 4.3-inch or 5-inch display of diagnostic scanner. The BC IF742 car code reader with the more simplified key operation on the right. Save the player from touching the screen with greasy hands. Always keep the screen clear. Sturdy but ergonomic handle makes for more comfortable and secure grip.

[ Versatile Use ] Our alignment tool is ideal for measuring and checking the camber and castor angle on a wheel hub or brake disc, maintaining correct wheel alignment even after tire wear and can also be used as a normal gradienter.

[ Unversal Camber Tool ] Allows you to return the strut to the original camber position after dismantling and re-assembling or to check the amount of camber change before re-installing.

[ Easy-To-Use Magnetic Gauge ] Features a simple to use and easy to read leveling adjustment from -5 degrees to 5 degrees with a powerful magnet for easy mounting on all kinds of metal surfaces.

✔【Accurate Measurement】 - This adjustable magnetic gauge tool allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle.

✔【Professional Tools】- This adjustable magnetic gauge tool has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)

✔【Multi-Function】- This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released)

Adjustable Magnetic Gauge Tool gauge Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing

Has a simple leveling adjustment from -5 degrees to 5 degrees

Suitable for accurate checking of the castor and camber angle

Designed to remove and install fan clutch and rotate or restrain the camshaft pulley.

Four different size step pins are interchangeable. Adjustable jaw spread.

Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts.

High Functionality: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better.

Aluminum Alloy Structure: Toe alignment plates are made of aluminum alloy. The sturdy structure will provide you with long-term service. Wheel alignment plates are equipped with 4 probe feet to facilitate your measurement.

Stand-off Wheels: Two triangular aluminum holders are welded under each aluminum plate, to allow our aluminum plates to stand upright by themselves. You can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable.

Mild Steel

Laser Etched

Sold In Pairs

Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft

Includes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft

Blow-molded storage case

COMPLETE KIT: This OMT engine timing tool set comes with every part you need to lock the camshaft and timing in your BMW: camshaft alignment plates, fixing bases, a pre-tensioning tool, and flywheel, locking, and timing pins

CUSTOM DESIGN: Our automotive timing tools are specifically designed for BMW models with N51, N52, N53, N54, & N55 engines; see the fitment above for complete details

QUALITY MATERIALS: The fixing bases are constructed with aluminum specially-treated for durable corrosion-free performance; other parts are made from 45# steel heat treated to withstand heavy-duty use and blackened or galvanized for a long service life

☞Fitment: For Can Am Macverick X3 2017-2020 Model

☞Material: High quality stainless steel CNC machined pins and lanyards, ensure a longer service time

☞Good Helper: Made removing the cover more practical for belt inspection or replacement

Mounts onto a hub or brake disc for quick and accurate measurement of camber & castor angles. Also does king pin inclination

On the rear there are two brass adjuster knobs, one to zero the bubble during angle measurement and the other for adjusting the king pin inclination.

The ÿCamber gauge has fixed graduation from +5ø to -5ø

Faster, Easier Replacement of Clutches

Align clutch plates and pilot bearings accurately

Fit Type: Vehicle Specific

【Fitment】 HECASA toe plates wheel alignment set was designed for car and SUV. If you have a lifted/4x4 vehicle with larger than stock off-road tires, or a commercial vehicle, the tire sidewall may be too tall for this DIY alignment tool.

【High quality】 Made from high quality brushed aluminum sheet, with more functionality and durability. Rust protection coating, lengthen the using life span.

【Design】Features specially crafted slots, has been proved through tests that the ends of the tape measures won’t fall out when you using it.

High tech aluminum gauge for measuring toe

Eliminates need for tape measures

Measures in 1/16" increments