Best Automotive Performance Fuel Hoses in 2026

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.

♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.

♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.

♛ HIGH QUALITY ---- High quality 304 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band.

♛ HIGH QUALITY ---- High quality Zinc Plated Steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band.

♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.

♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.

-12 AN, Length: 2 feet. ID size: 3/4", 19.1mm; OD size: 1-1/32", 26.2mm

Material: Made by High-Graded Nitrile Rubber (NBR) with Textile Reinforced, Covered by Elastomer

Works With Push-On Hose End Fittings, suit 400 & 510 series hose ends

【Size】 ID: 3/8" (10mm), OD: 2/3 " (17mm), Length: 10FT.

【Premium Material】 Premium nylon fiber wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.

【Strong and Durable】 Nylon Braided Fuel Hose Working Temperature Range: -40°F to +300°F, Maximum Working pressure: 290 PSI, Burst pressure: 1160 PSI. PROFESSIONAL OIL RESISTANT DN8MM 20BAR MAXIMUM W.P.

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.

Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase.

Include a universal 3Ft fuel hose and 2pcs swivel hose ends; Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16")

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line.

【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc.

【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M).

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm

BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 20 feet long enough for a wide range of applications.

QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance.

【Premium Material】 Premium braided nylon outer layer, abrasion-resistant. Embedded stainless steel reinforcement layer, long service life. Synthetic rubber layer, enhanced flexibility, perfect racing accessories for fuel injection.

【Product Specification】 AN10 fuel line hose. ID: 9/16 inch, OD: 0.82 inch. Length: 10 feet. Please measure before purchase.

【Working Range】 Nylon braided fuel hose working temperature range: -40℉ to 257℉, maximum working pressure: 350 psi, burst pressure: 1400 psi.

Our Stainless steel braided (PU) fuel hose are ideal for high temperature and high pressure applications, making it easy work with for any automotive project.

Our premium fittings provide you with unsurpassed levels of performance and reliability and performance applications

Hose ID: 8.3 mm (5/16") . OD: 13.4 mm (17/32"). Hose Length: 5 feet.

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket--they live it--and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature.

Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

Features: Specific combinations of silicone compounds and fabrics provide the performance, reliability strength and flexibility needed to improve engine cooling system flow and enhance performance

Premium Materials: The automotive silicone vacuu tubing is made of high-grade 4-layer silicone and a double layer of heat-resistant fibers for pressure resistance, UV resistance, water, oil/fuel, heat reduction and enhanced hose life expectancy

Minimum temperature: -58F / Maximum temperature: 392F

Hose features two female -4AN aluminum fittings and is 12-foot in length

Premium stainless steel outer covering for strength

Teflon lined for flexibility

Our Stainless steel braided (PU) fuel hose are ideal for high temperature and high pressure applications, making it easy work with for any automotive project.

Our premium fittings provide you with unsurpassed levels of performance and reliability and performance applications

Hose ID: 14.2 mm (9/16"). OD: 19 mm (3/4") . Hose Length: 10 feet.

ID: 1/4inch (6mm);OD: 0.47inch(12mm).Material: NBR.

Working pressure: 200psi.Max working pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 2.36inch(60mm).

Applicable Medium: 1/4 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

The fuel line hose is for transfer petrol products.

Fuel line: hose inner diameter is 15mm / 9/16", hose outer diameter is 9.5mm / 3/8". Its total length is 457.2cm / 15ft.

The Fuel Line Hose is made of Nitrile Rubber, which is better and durable for your car engine.

Direct replacement - this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications

Restores functionality - reliable replacement for an original part that has failed due to heat or vibration

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

ID: 1/2". OD: 0.68in.Length: 20 feet(6M). Please measure before purchase!

PTFE fuel line can be used as fuel injection hose, boost line,carb fuel line, ls engine swap fuel line, fuel return line, vapor return line,fuel supply line, etc.

Working Temperature Range: -76℉ to 446℉ (-60℃ to 230℃). Max Working Pressure: 2000psi. Bursting Pressure: 6000psi.