Daisy
Last Updated: Jul 19, 2026
* PickSmartly editors independently research, review, and endorse the top products through comprehensive data analysis. We may earn a commission for qualifying purchases made through our product links.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| CLYXX | 0.00 | ✅ | ✅ | ✅ |
The CP4 Pump is prone to failure if the fuel system has any water or contaminated fuel introduced to it. When the pump fails, it will send metal contaminants throughout the entire fuel system which in most cases will ruin the injectors and other sensors and cost you several thousand dollars.
The System Saver Inlet Valve was designed to offer you peace of mind in the event of a CP4 Pump failure. The important difference between the OEM valve and the System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80 micron layer, and is a very flimsy design. In extreme cases the factory screen can actually tear, introducing massive amounts of debris (from the failed pump) into the injectors.
The System Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing.
Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will bring the truck out of service and shut it down in a shorter amount of time. This is all positive for improving the chances injectors won't need to be replaced when a pump has failed.
Exergy has also flow tested the valve with the upgraded filter and there is no measurable loss of pump performance with the finer screen, even with a 10mm stroker CP4 pump at 4500 RPM. The screen and housing are constructed from stainless steel for corrosion resistance. And, as always, you can trust that Exergy products have been properly de-burred and are assembled using appropriate processes to ensure proper cleanliness.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Metering rod is used to control the air/fuel mixture
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Rods are incredibly easy to change
Diameter of the cruise and the power is 0. 065 and 0. 047
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Rods are incredibly easy to change
Metering rod is used to control the air/fuel mixture
Diameter of the cruise and the power is 0. 070 and 0. 052
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Rods are incredibly easy to change
Metering rod is used to control the air/fuel mixture
Diameter of the cruise and the power is 0. 075 and 0. 047
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| PartsHawk | 9.44 | ❌ | ❌ | ❌ |
Rods are incredibly easy to change
Metering rod is used to control the air/fuel mixture
Diameter of the cruise and the power is 0. 073 and 0. 052
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Allstate Carburetor | 9.90 | ❌ | ❌ | ❌ |
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Rods are incredibly easy to change
Metering rod is used to control the air/fuel mixture
Diameter of the cruise and the power is 0. 070 and 0. 037
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Trends Auto | 9.83 | ❌ | ❌ | ❌ |
Adjustable idle feed restrictions
3 pre-drilled emulsion channels
Non-stick gaskets
Exclusive QFT positive retaining vent baffle
Stainless steel idle mixture screws with nylon seals
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SUPER SHOPS | 9.64 | ❌ | ❌ | ❌ |
Adjustable idle feed restrictions
4 available emulsion channels pre-drilled
Non-stick gaskets
Stainless steel mixture screws with nylon seals
Exclusive QFT positive retaining vent baffle
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Rods are incredibly easy to change
Metering rod is used to control the air/fuel mixture
Diameter of the cruise and the power is 0.068 and 0.047
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| PartsHawk | 9.43 | ❌ | ❌ | ❌ |
Designed for use with the Edelbrock Performer and Thunder Series carburetors only
Diameter of the cruise and the power is 0. 075 and 0. 037
Metering rod is used to control the air/fuel mixture
Rods are incredibly easy to change
Allows you to fine-tune your carburetor for optimum performance
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Allstate Carburetor | 9.90 | ❌ | ❌ | ❌ |
Holley performance carburetors use a secondary metering plate, with drilled restrictions, rather than a secondary metering block, with removable jets
Here is the list of top-rated brands that were evaluated by PM.
| Brand | Count |
|---|---|
| Edelbrock | 7 |
| Holley | 2 |
| Quick Fuel Technology | 2 |
| Prime_Warehouse | 1 |
We've carried out a comprehensive analysis of 207 reviews on automotive performance fuel injection metering parts, using our selection criteria to identify the best options in the categories. Our findings reveal that most customers typically select automotive performance fuel injection metering parts priced around $58.27, with top brands including and
Our team of expert editors reviewed these high-quality items and handpicked the top 12 automotive performance fuel injection metering parts for your consideration. We've also done extensive research on numerous sellers, identifying the best ones in the categories category. These include and .
We are dedicated to assisting our users in finding the right parts Products based on their needs, saving them considerable time when choosing which automotive performance fuel injection metering parts to buy. We take pride in the number of satisfied users we've helped through our thorough and insightful reviews.