Best Dorman Automotive Replacement Brake Kits in 2026

Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560).

Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads.

Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting .

Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-9282-DR) for Both Rear Wheels. | * Only one side pictured. See the list, the diagram, and the assembly booklet below for a detail of the parts included. | * Features Drilled and Slotted Rotors with Powder-Coated Red Calipers.

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake.

These Big Brake kits require at least 16" diameter wheels.

Brand New Wilwood Forged Dynalite Pro Series Bolt-On Front Hub and 11.00" Disc Brake Kit (Part # 140-11023-D) for Both Front Wheels | * Only one side pictured See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Drilled and Slotted Rotors and Black Calipers

Fits: | * Dodge: | * 1965-1972 Dodge A-Body with 10" Drum Brake Spindles | * 1965-1972 Dodge Dart with 10" Drum Brake Spindles | * 1971-1972 Dodge Demon with 10" Drum Brake Spindles | * Plymouth: | * 1965-1972 Plymouth A-Body with 10" Drum Brake Spindles | * 1965-1969 Plymouth Barracuda with 10" Drum Brake Spindles | * 1970-1972 Plymouth Duster with 10" Drum Brake Spindles | * 1965-1972 Plymouth Valiant with 10" Drum Brake Spindles

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications

Brand New Wilwood Complete Premium Big Brake Front and Rear 12.19" Disc Brake Kit | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included | * Features Drilled/Slotted Rotors and Black Calipers

Complete Brake Kit Includes:| * > Dynapro 6 Piston Bolt-On Front Hub and 12.19" Disc Brake Kit (Part # 140-10510-D) for Both Front Wheels > Dynalite 4 Piston Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake (Part # 140-7149-D) for Both Rear Wheels > Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings > Full Line Kit for the Rear with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings

Fits:| Chevrolet:* > 1967-1969 Camaro *** > 1964-1972 Chevelle*** > 1964-1972 El Camino *** > 1970-1972 Monte Carlo with Disc Brake Spindles on the Front *** > 1964-1974 Chevy II *** > 1964-1974 Nova *** | GMC:* > 1971-1972 Sprint *** | Buick:* > 1973-1974 Apollo *** > 1965-1970 Century *** > 1965-1972 Gran Sport *** > 1964-1972 Skylark *** > 1964-1972 Special *** > 1965-1972 Sportswagon *** | Oldsmobile:* > 1964-1972 Cutlass *** > 1968-1972 Cutlass Cruiser *** > 1964-1972 Vista Cruiser *** > 1967-1972 4-4-2 *** > 1964-1972 F85 *** > 1973-1974 Omega *** | * Pontiac: > 1967-1969 Firebird ** > 1964-1972 GTO *** > 1964-1972 Lemans *** > 1964-1972 Tempest *** > 1969-1972 Grand Prix with Disc Brake Spindles on the Front *** > 1969 Grand Prix with Drum Brake Spindles on the Front *** > 1971-1974 Ventura II *** | *** The rear kit fits GM 10 Bolt and 12 Bolt rear ends with the "GM / CHEVY" Axle Flanges and a 2.75" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all A Body and F Body cars from 1964-1978 will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them ***

Brand New Wilwood Complete Premium Big Brake Front and Rear 12.19" Disc Brake Kit | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included | * Features Drilled/Slotted Rotors and Black Calipers

Complete Brake Kit Includes: | * Forged Dynalite Bolt-On Front Hub and 12.19" Disc Brake Kit (Part # 140-7675-D) for Both Front Wheels | * Forged Dynalite Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake (Part # 140-7149-D) for Both Rear Wheels | * Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * Full Line Kit for the Rear with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings

Fits: | Chevrolet:* > 1967-1969 Camaro *** > 1964-1972 Chevelle *** > 1964-1972 El Camino *** > 1970-1972 Monte Carlo with Disc Brake Spindles on the Front *** > 1964-1974 Chevy II *** > 1964-1974 Nova *** GMC: > 1971-1972 Sprint *** Buick: > 1973-1974 Apollo *** > 1965-1970 Century *** > 1965-1972 Gran Sport *** > 1964-1972 Skylark *** > 1964-1972 Special *** > 1965-1972 Sportswagon *** Oldsmobile: > 1964-1972 Cutlass *** > 1968-1972 Cutlass Cruiser *** > 1964-1972 Vista Cruiser *** > 1967-1972 4-4-2 *** > 1964-1972 F85 *** > 1973-1974 Omega *** Pontiac: > 1967-1969 Firebird *** > 1964-1972 GTO *** > 1964-1972 Lemans *** > 1964-1972 Tempest *** > 1969-1972 Grand Prix with Disc Brake Spindles on the Front *** > 1969 Grand Prix with Drum Brake Spindles on the Front *** > 1971-1974 Ventura II *** | ***The rear kit fits GM 10 Bolt and 12 Bolt rear ends with the "GM / CHEVY" Axle Flanges and a 2.75" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all A Body and F Body cars from 1964-1978 will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them ***

Brand New Wilwood Forged Dynalite Pro Series Bolt-On Rear Hat and 12.19" Disc Brake Kit (Part # 140-7148-DP) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Drilled/Slotted Rotors and Polished Calipers

Fits: | * 1993-1997 Chevrolet Camaro | * 1993-1997 Pontiac Firebird

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake

Brand New Wilwood Complete Pro Series Front and Rear 11" Disc Brake Kit

Complete Brake Kit Includes: | * Forged Dynalite Bolt-On Front Hub and 11" Disc Brake Kit (Part # 140-12040-R) for Both Front Wheels | * Low-Profile Dynapro Bolt-On Rear Hat and 11" Disc Brake Kit with Parking Brake (Part # 140-11385-R) for Both Rear Wheels | * Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * Full Line Kit for the Rear with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included

Fits: | * Chevrolet Bel Air: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Biscayne: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Brookwood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Caprice: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Impala: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Kingswood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Townsman: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * ***The rear kit fits rear ends with the "CHEVY C10" Axle Flanges and a 2.42" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all these applications will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them***

Brand New Wilwood Big Brake Rear Parking Brake, Superlite, Bolt-On 12.88" Disc Brake Kit (Part # 140-12964-DR) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | Features Drilled/Slotted Rotors and Powder-Coated Red Superlite Calipers

Fits: | * GM Rear Ends with the "GM/CHEVY" Axle Flanges and with a 2.75" Flange Offset (see diagrams shown in the images) | * This was the main rear end that GM used on almost all A-Body and F-Body cars from 1964-1978, among many others | * Make sure to check the diagrams shown to confirm the fitment with your rear end

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications

Brand New Wilwood Corvette W6A 6 Piston Brake Caliper Set (Part #140-12629-R) for Both Front Wheels. * See the list and diagram for a detail of the parts included. * Features Red Powder-Coated calipers.

Fits: * 2006-2012 Chevrolet Corvette C-6 & Z06** **This caliper set works with rotors that are 13.39" (340mm) or 14.00" (356mm) in diameter, which all of the 2006-2012 Corvettes should have one of those sizes from stock from GM**. * 1997-2005 Chevrolet Corvette C-5 & Z06** **This caliper set will only fit these year models when you replace the stock rotors with the larger 2006-2012 rotors (13.39" or 14.00")**.

Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

New Wilwood Bolt-On Rear Parking Brake 12.19" Disc Brake Kit (Part # 140-14224-B) for Both Rear Wheels > Only one side shown in the images > Features Standard Rotors and Powder-Coated Black Calipers

Fits: > 10 Bolt and 12 Bolt GM Rear Ends with a 2.91" Axle Flange Offset (see diagrams shown in the images) with C-Clip Eliminators

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > FDL Pro-Series MC4 Parking rear disc brake kits with parking brake provide a complete solution for popular muscle car rear axles on applications where internal drum parking brake assemblies interfere with c-clip eliminator assemblies

Brand New Wilwood Stock Replacement DPHA 4 Piston Caliper & 10.32" (262mm) Disc Brake Kit (Part #140-12996-D) for Both Front Wheels. * Only one side pictured. See the list and diagram for a detail of the parts included. * Features Drilled & Slotted Rotors, as well as Powder-Coated Black Calipers.

Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Wilwood’s DynaPro Honda/Acura Calipers (DPHA), for Honda and Acura models originally equipped with 262mm diameter rotors, bolt directly to the stock mounts on factory spindles, fit over the OE 262mm diameter rotor, accept the OE brake hose, and clear many factory aluminum wheels including the EM1 Si 15” wheel.

New Wilwood Big Brake Bolt-On Front and Rear 12.19" Disc Brake Kit with Wilwood WWE 2 1/2" Drop Front Spindles > Features WWE 2 1/2" Modular Drop ProSpindles, Steering Arms, Hubs, Drilled/Slotted Rotors and Black Calipers

Fitment: | Chevy: > 1971-1987 C10 2wd Trucks* > 1971-1987 C10 2wd Suburbans* > *** 1971-1972 models require the use of 73-87 C10 upper and lower ball joints and tie rod ends, which aren't included *** | GMC: > 1971-1987 C15/C1500 2wd Trucks* > 1971-1987 C15/C1500 2wd Suburbans* > *** 1971-1972 models require the use of 73-87 C10 upper and lower ball joints and tie rod ends, which aren't included ***

Complete Brake Kit Includes: > 4 Piston, Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-15302-D) for Both Front Wheels > Forged 2 1/2" Drop Spindles with Steering Arms and Hubs (Part # 831-14202) for Both Front Wheels > 4 Piston, Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake Assemblies (Part # 140-10094-D) for Both Rear Wheels > Full Line Kit for the Front with 18" Steel Braided Lines > Full Line Kit for the Rear with 18" Steel Braided Lines

New Wilwood Big Brake Bolt-On Front and Rear 12.19" Disc Brake Kit with Wilwood WWE 2 1/2" Drop Front Spindles > Features WWE 2 1/2" Modular Drop ProSpindles, Steering Arms, Hubs, Drilled/Slotted Rotors and Red Calipers

Fitment: | Chevy: > 1971-1987 C10 2wd Trucks* > 1971-1987 C10 2wd Suburbans* > *** 1971-1972 models require the use of 73-87 C10 upper and lower ball joints and tie rod ends, which aren't included *** | GMC: > 1971-1987 C15/C1500 2wd Trucks* > 1971-1987 C15/C1500 2wd Suburbans* > *** 1971-1972 models require the use of 73-87 C10 upper and lower ball joints and tie rod ends, which aren't included ***

Complete Brake Kit Includes: > 4 Piston, Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-15302-DR) for Both Front Wheels > Forged 2 1/2" Drop Spindles with Steering Arms and Hubs (Part # 831-14202) for Both Front Wheels > 4 Piston, Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake Assemblies (Part # 140-10094-DR) for Both Rear Wheels > Full Line Kit for the Front with 18" Steel Braided Lines > Full Line Kit for the Rear with 18" Steel Braided Lines

Brand New Wilwood Complete Pro Series Front and Rear 11" Disc Brake Kit | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included | * Features Drilled/Slotted Rotors and Black Calipers

Complete Brake Kit Includes:| > Forged Dynalite Pro Series Bolt-On Front Hub and 11" Disc Brake Kit (Part # 140-10996-D) for Both Front Wheels > Low-Profile Dynapro Bolt-On Rear Hat and 11" Disc Brake Kit with Parking Brake (Part # 140-11398-D) for Both Rear Wheels > Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings > Full Line Kit for the Rear with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings

Fits: |Chevrolet:* > 1967-1969 Camaro *** > 1964-1972 Chevelle *** > 1964-1972 El Camino *** > 1970-1972 Monte Carlo with Disc Brake Spindles on the Front *** > 1964-1974 Chevy II *** 1964-1974 Nova *** | GMC:* > 1971-1972 Sprint** | Buick:* > 1973-1974 Apollo *** > 1965-1970 Century *** > 1965-1972 Gran Sport *** > 1964-1972 Skylark *** > 1964-1972 Special** > 1965-1972 Sportswagon** | Oldsmobile:* > 1964-1972 Cutlass *** > 1968-1972 Cutlass Cruiser *** > 1964-1972 Vista Cruiser *** > 1967-1972 4-4-2 *** > 1964-1972 F85 *** > 1973-1974 Omega *** | Pontiac:* > 1967-1969 Firebird *** > 1964-1972 GTO *** > 1964-1972 Lemans *** > 1964-1972 Tempest *** > 1969-1972 Grand Prix with Disc Brake Spindles on the Front *** > 1969 Grand Prix with Drum Brake Spindles on the Front *** > 1971-1974 Ventura II *** | | *** The rear kit fits GM 10 Bolt and 12 Bolt rear ends with the "GM / CHEVY" Axle Flanges and a 2.75" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all A Body and F Body cars from 1964-1978 will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them ***

Brand New Wilwood Complete Premium Big Brake 13" Front and 12" Rear Disc Brake Kit | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included | * Features Drilled and Slotted Rotors with Red Calipers

Complete Brake Kit Includes:| > Narrow Superlite 6 Piston Bolt-On Front Hub and 12.90" 1-Piece Disc Brake Kit (Part # 140-12271-DR) for Both Front Wheels > Dynalite 4 Piston Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake (Part # 140-7149-DR) for Both Rear Wheels > Full Line Kit for the Front with 15" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings > Full Line Kit for the Rear with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings

Fits: | Chevrolet:* > 1967-1969 Camaro*** > 1964-1972 Chevelle*** > 1964-1972 El Camino*** > 1970-1972 Monte Carlo with Disc Brake Spindles on the Front*** > 1964-1974 Chevy II*** > 1964-1974 Nova*** | GMC:* > 1971-1972 Sprint*** | Buick:* > 1973-1974 Apollo*** > 1965-1970 Century*** > 1965-1972 Gran Sport*** > 1964-1972 Skylark*** > 1964-1972 Special*** > 1965-1972 Sportswagon*** | Oldsmobile:* > 1964-1972 Cutlass*** > 1968-1972 Cutlass Cruiser*** > 1964-1972 Vista Cruiser*** > 1967-1972 4-4-2*** > 1964-1972 F85*** > 1973-1974 Omega*** | Pontiac:* > 1967-1969 Firebird*** > 1964-1972 GTO*** > 1964-1972 Lemans*** > 1964-1972 Tempest*** > 1969-1972 Grand Prix with Disc Brake Spindles on the Front*** > 1969 Grand Prix with Drum Brake Spindles on the Front*** > 1971-1974 Ventura II*** | *** The rear kit fits GM 10 Bolt & 12 Bolt rear ends with the "GM / CHEVY" Axle Flanges and a 2.75" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all A Body and F Body cars from 1964-1978 will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them ***

Brand New Wilwood Premium Big Brake Dynapro 6 Piston Caliper, Bolt-On Front Hat, and 12.19" Disc Brake Kit (Part # 140-10735-DR) for Both Front Wheels > Only one side pictured > Features Drilled/Slotted Rotors and Red Calipers > Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications

The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19" diameter rotors for these compact kit > These kits are the perfect compliment to wheel, tire, and suspension upgrades > Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions > These Big Brake kits require at least 16" diameter wheels

Fits: | Acura: | Integra: > 1990-1996, all > 1997-2001, all except Type R | EL: > 2001, all without ABS (Canada) > 2001-2005, all with ABS (Canada) | Honda: | Civic Coupe: > 1993-1995 EX, all > 1996 EX, all with ABS > 1997-2002 EX, all > 1999-2000 SI, all > 2001 DX, HX, and LX, all > 2002 DX and LX, all > 2003-2005, all

Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-7141-DR) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Drilled/Slotted Rotors and Red Calipers

Fits: | * 10 Bolt and 12 Bolt GM Rear Ends with a 2.81" Axle Flange Offset (see diagrams shown in the images) with C-Clips

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications

Brand New Wilwood Complete Big Brake Front and Rear 12.19" Disc Brake Kit

Complete Brake Kit Includes: | * Forged Dynapro 6 Piston, Bolt-On Front Hub and 12.19" Disc Brake Kit (Part # 140-12946-DR) for Both Front Wheels | * Forged Dynalite 4 Piston, Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake (Part # 140-10094-DR) for Both Rear Wheels | * Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * Full Line Kit for the Rearf with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included

Fits: | * Chevrolet Bel Air: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Biscayne: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Brookwood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Caprice: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Impala: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Kingswood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Townsman: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | ***The rear kit fits rear ends with the "CHEVY C10" Axle Flanges and a 2.42" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all these applications will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them***

Brand New Wilwood Classic Bolt-On Front Hub & 11.75" 1- Piece Disc Brake Kit (Part #140-14614) for Both Front Wheels.

Fits: Ford: 1968-1972 F-100, 4 x 2

Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Brand New Wilwood Pro Series Bolt-On Front Hub, Dynalite 4 Caliper, and 11" Disc Brake Kit with Steel Braided Brake Line Kit, Stock Height Spindles, and Steering Arms (Part # 140-10996-D, # 103-9801, # 101-9646, # 293-8307) for Both Front Wheels | * Only one side pictured | * See the images, diagram, and the list below for a detail of the parts included | * Features Drilled and Slotted Rotors, Black Calipers and Stock Height Spindles

Fits: | * Chevrolet: | * 1967-1969 Camaro | * 1968-1974 Chevy II / Nova | * Buick: | * 1973-1974 Apollo | * Oldsmobile: | * 1973-1974 Omega | * Pontiac: | * 1967-1969 Firebird | * 1971-1974 Ventura

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * FDL Pro Series front hub kits offer complete disc brake upgrade solutions for traditional non-ABS spindle applications on American muscle cars, vintage rods, and heavyweight drag cars | * Based on the venerable Forged Billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast | * Most kits require no modification for installation | * These kits can be used with either manual or power boost master cylinders

Brand New Wilwood Complete Brake Caliper Set for the Front and Rear | Complete Kit Includes: > W6A, 6 Piston Caliper, Pad, and Bracket Kit (Part # 140-12629-R) for Both Front Wheels > Superlite 4R, 4 Piston Caliper, Pad, and Bracket Kit (Part # 140-14026-R) for Both Rear Wheels > See the lists, the diagrams, and the assembly booklets for a detail of the parts included > Features Red Powder-Coated calipers

Fits: | 2006-2013 Chevrolet Corvette C-6 and Z06 *** > *** This caliper set works with rotors that measure: *** > Front: 13.39" (340mm) or 14.00" (356mm) in diameter > Rear: 13.00" (330mm) in diameter > *** Which all of the 2006-2013 Corvettes should have those sizes from stock from GM *** | 1997-2005 Chevrolet Corvette C-5 and Z06 *** > **This caliper set will only fit these year models when you replace the stock rotors with the larger 2006-2013 rotors

According to GM's information, the C-6 rotors will bolt directly on the C-5 Vettes, so this is a fairly common upgrade** On the front, W6A Caliper and bracket kits replace the original equipment calipers on OE vehicles originally equipped or upgraded to the OEM 13.39" or 14.00" diameter rotors > W6A six piston radial mount calipers offer heavy-duty stopping power for the road or track > The caliper incorporates race technology into a proprietary forged body design with widespread adaptability

Brand New Southwest Speed Front Hub, Rotor, Caliper, & Spindle Kit For Hot Rods, Street Rods, & Restorations With A 5 X 5" Bolt Pattern (SWS Part # 203-878). | * Custom Designed Kit Fits Together Perfectly Without Any Modification And Gives You Enough Parts To Do Both Front Wheels. | * All Pieces Are 100% Brand New

Kit Includes: | * 2 - Pinto / Mustang II Spindles (Left & Right) | * Forged Steel Construction For Maximum Strength | * 10 Degree Pin Inclination | * Fits Stock Pinto Upper & Lower Ball Joints | * Weighs Approximately 8.28 Lbs | * 2 - Granada Front Hubs & Rotors | * 5 X 5"" Bolt Pattern With 5/8""-11 Coarse Studs | * .810"" Thick X 11"" O.D. Rotor | * Races Installed | * Weighs Approximately 17.50 Lbs

2 - Bearing Kits To Put Pinto Spindles On Granada Hubs & Rotors | Kits Include: 1 - Hub Seal | 1 - Inner Wheel Bearing | 1 - Outer Wheel Bearing | 1 - Spindle Nut | 1 - Thrust Washer | 1 - Lock Washer | 1 - Dust Cover | 1 - Cotter Pin | 2 - Brand New GM Metric Calipers (Left & Right) | Brand New Cast Steel Calipers | Directly Replaces The 1978-Later D154 Stock GM Metric Calipers | 2 1/2" Stock Piston Size (2 3/8" & 2 5/8" Pistons Available Upon Request) | Floating Design | Include Bleeder Screws

Brand New Southwest Speed Front Hub, Rotor, And Caliper Kit For Hot Rods, Street Rods, And Restorations With A 5 X 4 1/2" Bolt Pattern (SWS Part # 203-870). | * Custom Designed Kit Fits Together Perfectly Without Any Modification And Gives You Enough Parts To Do Both Front Wheels. | * All Pieces Are 100% Brand New.

Kit Includes: | * 2 - Granada Front Hubs And Rotors | * 5 X 4 1/2" Bolt Pattern With 1/2"-20 Fine Threaded Studs | * 1.00" Thick X 11" O.D. Rotor Races Installed | * If You Have A 5 X 4 1/2" Bolt Pattern On The Rear, You Can | * Put These On The Front And Make All 4 Wheels Match Strength Has Never And Will Never Be A Problem With Southwest Speed Hubs And Rotors; They Are Designed To Always Prevent Overheating, Distortion, And Cracking | * Weighs Approximately 21.54 Lbs

2 - Bearing Kits To Put The Granada Hubs And Rotors On Pinto / Mustang II Spindles | * Each Kit Includes: | * 1 - Hub Seal | 1 - Inner Wheel Bearing | 1 - Outer Wheel Bearing | 1 - Spindle Nut | 1 - Thrust Washer | 1 - Lock Washer | 1 - Dust Cover | 1 - Cotter Pin | 2 - Completely Brand New GM Metric Calipers (Left And Right) | Brand New Cast Steel Calipers | Directly Replaces The 1978 And Later D154 Type Stock Gm Metric Calipers | 2 1/2" Stock Piston Size (2 3/8" And 2 5/8" Pistons Available)

Currie Explorer Rear Parking Brake, Bolt-On 11" Disc Brake Kit with Parking Brake Cable Set, Flexline Set, and Hard Line Set (Part #CE-6012E3 Kit) for Both Rear Wheels.

Fits: Big Bearing Ford New Style (also known as Torino) Rear Ends with a 3.562" x 2.000" Mounting Pattern on the Axle Flange & with a 2.50" Flange Offset (see diagrams in images)

Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Brand New Wilwood Classic Bolt-On Front Hub & 11.75" 1- Piece Disc Brake Kit (Part #140-14607) for Both Front Wheels.

Fits: Ford: 1957-1958 F-100, all | 1959-1967 F-100, 4 x 2

Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-7140-R) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Red Calipers

Fits: | * Big Bearing Ford (New Style) Rear Ends with a 3.562" x 2.000" Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown in the images)

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake

New Wilwood Big Brake Bolt-On Front and Rear 12.19" Disc Brake Kit with Wilwood WWE 2 1/2" Drop Front Spindles > Features WWE 2 1/2" Modular Drop ProSpindles, Steering Arms, Hubs, Standard Rotors, and Red Calipers

Fitment: | Chevy: > 1963-1970 C10 2wd Trucks* > 1963-1967 C10 Panels* > 1967-1970 C10 2wd Suburbans* > *Requires the use of 73-87 C10 upper and lower front ball joints, which aren't included* | GMC: > 1963-1966 1000 2wd Trucks* > 1967-1970 C15/C1500 2wd Trucks* > 1967-1970 C15/C1500 2wd Suburbans* > *Requires the use of 73-87 C10 upper and lower front ball joints, which aren't included*

Complete Brake Kit Includes: > 4 Piston, Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-15302-R) for Both Front Wheels > Forged 2 1/2" Drop Spindles with Steering Arms and Hubs (Part # 831-14201) for Both Front Wheels > 4 Piston, Bolt-On Rear Hat and 12.19" Disc Brake Kit w/Parking Brake Assemblies (Part # 140-10094-R) for Both Rear Wheels > Full Line Kit for the Front with 18" Steel Braided Lines > Full Line Kit for the Rear with 18" Steel Braided Lines

Brand New Wilwood Rear Parking Brake, Dynapro Low-Profile, Bolt-On 11" Disc Brake Kit (Part # 140-11403-DR) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Drilled/Slotted Rotors and Red Calipers

Fits: | * Small Bearing Ford Rear Ends with a 3.336" x 2.000" Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown in the images)

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications that require a parking brake assembly and extra clearance for 15.00” rim applications

Brand New Wilwood Rear Parking Brake, Dynapro Low-Profile, Bolt-On 11" Disc Brake Kit (Part # 140-11395-D) for Both Rear Wheels. Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Drilled/Slotted Rotors and Black Calipers

Fits: | * Mopar 8 3/4" and Dana 60 Rear Ends with a 5 Bolt Mounting Pattern on the Axle Flange and with a 2.36" Flange Offset (see diagrams shown in the images) | * This kit is for use with Non-Adjustable Green Bearings (MO-400) with snap ring

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications that require a parking brake assembly and extra clearance for 15.00” rim applications